• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.163-166
• /
• 2003

The electrothermal simulation of high voltage LIGBT(Lateral Insulated Gate Bipolar Transistor) in thin Silicon on insulator (SOI) and Silicon on sapphire (SOS) for thermal conductivity and sink is performed by means of MEDICI. The finite element simulations demonstrate that the thermal conductivity of the buried oxide is an important parameter for the modeling of the thermal behavior of silicon-on-insulator (SOI) devices. In this paper, using for SOI LIGBT, we simulated electrothermal for device that insulator layer with $SiO_2\;and\;Al_2O_3$ at before and after latch up to measured the thermal conductivity and temperature distribution of whole device and verified that SOI LIGBT with $Al_2O_3$ insulator had good thermal conductivity and reliability

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권3호
• /
• pp.264-275
• /
• 2008

Electron mobility has been investigated theoretically in undoped double-gate (DG) MOSFETs of different channel architectures: a relaxed-Si DG SOI, a strained-Si (sSi) DG SSOI (strained-Si-on-insulator, containing no SiGe layer), and a strained-Si DG SGOI (strained-Si-on-SiGe-on-insulator, containing a SiGe layer) at 300K. Electron mobility in the DG SSOI device exhibits high enhancement relative to the DG SOI. In the DG SGOI devices the mobility is strongly suppressed by the confinement of electrons in much narrower strained-Si layers, as well as by the alloy scattering within the SiGe layer. As a consequence, in the DG SGOI devices with thinnest strained-Si layers the electron mobility may drop below the level of the relaxed DG SOI and the mobility enhancement expected from the strained-Si devices may be lost.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.151-151
• /
• 2003

열화학기상증착법(Thermal-CVD)을 이용하여 SOI(snilicon-on-insulator)기판과 실리콘기판 상에 단결정 3C-SiC 이종박막을 동시에 성장하고, 그 특성을 비교 분석하였다. 결정성 평가로는 X-선 회절(XRD)분석과 Raman 산란 분광분석, 그리고 투과전자현미경을 이용하였고, 잔류 웅력 비교 분석으로는 laser scanning 방법 과 Raman 산란 분광분석의 3C-SiC LO peak의 위치변화, 그리고 X-선 회절분석의 3C-SiC(004) peak의 위치변화를 이용하였다. 그 결과 SOI 기판과 실리콘 기판상에 고품위의 단결정 3C-SiC 박막이 성장됨을 확인하였고, SOI 기판을 사용한 경우 실리콘 기판에 비해 성장된 3C-SiC 이종박막의 잔류 응력이 실제로 감소됨을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제21권8호
• /
• pp.695-698
• /
• 2008

We investigated the characteristics of Strained-Si-on-Insulator (sSOI) MOSFETs with 0.7% tensile strain. The sSOI MOSFETs have superior subthreshold swing under 70 mV/dec and output current. Especially, the electron and hole were increased in sSOI MOSFET. The electron and hole mobility in sSOI MOSFET were 286$cm^2/Vs$ and 151$cm^2/Vs$, respectively. The carrier mobility enhancement is due to the subband splitting by 0.7% tensile strain.

• 센서학회지
• /
• 제3권1호
• /
• pp.5-11
• /
• 1994

본 논문은 실리콘기판 직접접합기술과 에피택샬 성장법으로 각각 형성한 SOI구조, 즉 Si/$SiO_{2}$/Si 및 Si/$Al_{2}O_{3}$/Si 상에 제작한 압저항형 압력센서의 특성을 기술한다. SOI구조의 절연층을 압저항의 유전체 분리막으로 이용한 압력센서는 $300^{\circ}C$ 까지 사용 가능했다. SOI구조의 절연층을 박막 실리콘 다아어프램 형성시 에칭 중지막으로 이용한 경우, 제작된 압력센서의 200개 소자들에 대한 압력감도의 변화는 ${\pm}2.3%$ 이내로 제어 가능했다. 더구나 실리콘 기판 직접접합기술과 에피택샬 성장법의 결합으로 형성한 더불 SOI구조($Si/Al_{2}O_{3}/Si/SiO_{2}/Si$)상에 제작된 압력센서는 고온분위기에서 사용 가능할 뿐만 아니라 고분해 능력을 갖는 특성을 보였다.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권2호
• /
• pp.165-170
• /
• 1995

This paper describes the fabrication and characteristics of a Si Hall sensor fabricated on a SOI (Si-on-insulator) structure. The SOI structure was formed by SDB(Si-wafer direct bonding) technology and the insulator of the SOI structure was used as the dielectrical isolation layer of a Hall sensor. The Hall voltage and sensitivity of the implemented SDB SOI Hall sensors showed good linearity with respect to the applied magnetic flux density and supplied current. The product sensitivity of the SDB SOI Hall sensor was average 600V/A.T and its value has been increased up to 3 times compared to that of bulk Si with buried layer of 10.mu.m. Moreover, this sensor can be used at high-temperature, high-radiation and in corrosive environments.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 추계학술대회 논문집
• /
• pp.86-89
• /
• 1994

This paper describes the fabrication and basic characteristics of a Si Hall device fabricated on a SOI(Si-on-insulator) structure. In which SOI structure was formed by SOB(Si-wafer direct bonding) technology and the insulator of the SOI structure was used as the dielectrical isolation layer of a Hall device. The Hall voltage and sensitivity of the implemented SDB SOI Hall devices showed good linearity with respectivity to the applied magnetic flux density and supple iud current. The product sensitivity of the SDB SOI Hall device was average 670 V/A$.$T and its value has been increased up to 3 times compared to that of bulk Si with buried layer of 10$\mu\textrm{m}$. Moreover, this device can be used at high-temperature, high-radiation and in corrosive environments.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2003년도 제14회 정기총회 및 03년 동계학술발표회
• /
• pp.172-173
• /
• 2003

SOI (Silicon on insulator) 웨이퍼를 이용하여 제작된 전자소자는 고온에서 동작이 안정될 뿐만 아니라 초고속 동작이 가능하고, 사용 소비전력이 낮고, 단위 소자의 집적 효율이 우수해 활발한 연구가 이루어지고 있다. 최근에 초고속 광소자와 단위 광소자들의 집적을 위해 Si 이외의 GaAs, InP, SIC 등의 반도체 박막을 절연층 위에 만드는 연구가 많이 진행되고 있다 따라서 초기에 절연체 위에 실리콘 박막을 형성하는 Silicon on insulator (SOI) 기술은 다양한 종류의 반도체 박막을 절연체 위에 형성하는 Semiconductor on insulator로 SOI의 의미가 확장되고 있다. (중략)

• E2M - 전기 전자와 첨단 소재
• /
• 제7권4호
• /
• pp.331-340
• /
• 1994

Polysilicon on insulator has been recrystallized by zone melting recrystallization method with graphite strip heaters. Experiments are performed with non-seed SOI structures. When the capping layer thickness of Si$\_$3/N$\_$4//SiO$\_$2/ is 2.0.mu.m, grain boundaries are about 120.mu.m spacing and protrusions reduced. After the seed SOI films are annealed at 1100.deg. C in NH$\_$3/ ambient for 3 hours, the recrystallized silicon surface has convex shape. After ZMR process, the tensile stress is 2.49*10$\^$9/dyn/cm$\^$2/ and 3.74*10$\^$9/dyn/cm$\^$2/ in the seed edge and seed center regions. The phenomenon of convex shape and tensile stress difference are completely eliminated by using the PSG/SiO$\_$2/ capping layer. The characterization of SOI films are showed that the SOI films are improved in wetting properties. N channel SOI MOSFET has been fabricated to investigate the electrical characteristics of the recrystallized SOI films. In the 0.7.mu.m thickness SOI MOSFET, kink effects due to the floating substrate occur and the electron mobility was calculated from the measured g$\_$m/ characteristics, which is about 589cm$\^$2//V.s. The recrystallized SOI films are shown to be a good single crystal silicon.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.579-582
• /
• 2000

This paper described on the fabrication of SOI(Si-on-insulator) structures with buried cavities by SDB technology and eletrochemical etch-stop. The cavity was fabricated the upper handling wafer by Si anisotropic etch technique. SDB process was performed to seal the fabricated cavity under vacuum condition at -760mmHg. In the SDB process, captured air and moisture inside of the cavities were removed by making channels towards outside. After annaling(100$0^{\circ}C$, 60 min.), the SDB SOI structure was thinned by electrochemical etch-stop. Finally, it was fabricated the SDB SOI structure with buried cavities as well as an accurate control and a good flatness.