• Proceedings of the PSK Conference
• /
• 2003.04a
• /
• pp.239.2-240
• /
• 2003

We have recently described the novel synthetic method for N-protected amines from various ethers using chlorosulfonyl isocyanate(CSI) and found that the mechanism of our CSI reaction is a competitive reaction of SN1 and SNi mechanism according to the stability of carbocation intermediate. Forthermore. we developed the regioselective and diastereoselective one-pot synthetic method for 1,2-amino alcohol, through the reaction of di-and tribenzyl thers with CSI, and invetigated its mechanism. (omitted)

• The Korean Journal of Physiology and Pharmacology
• /
• v.21 no.2
• /
• pp.153-160
• /
• 2017

In this study, we aim to determine the in vivo effect of human umbilical cord blood-derived multipotent stem cells (hUCB-MSCs) on neuropathic pain, using three, principal peripheral neuropathic pain models. Four weeks after hUCB-MSC transplantation, we observed significant antinociceptive effect in hUCB-MSC-transplanted rats compared to that in the vehicle-treated control. Spinal cord cells positive for c-fos, CGRP, p-ERK, p-p 38, MMP-9 and MMP 2 were significantly decreased in only CCI model of hUCB-MSCs-grafted rats, while spinal cord cells positive for CGRP, p-ERK and MMP-2 significantly decreased in SNL model of hUCB-MSCs-grafted rats and spinal cord cells positive for CGRP and MMP-2 significantly decreased in SNI model of hUCB-MSCs-grafted rats, compared to the control 4 weeks or 8weeks after transplantation (p<0.05). However, cells positive for TIMP-2, an endogenous tissue inhibitor of MMP-2, were significantly increased in SNL and SNI models of hUCB-MSCs-grafted rats. Taken together, subcutaneous injection of hUCB-MSCs may have an antinociceptive effect via modulation of pain signaling during pain signal processing within the nervous system, especially for CCI model. Thus, subcutaneous administration of hUCB-MSCs might be beneficial for improving those patients suffering from neuropathic pain by decreasing neuropathic pain activation factors, while increasing neuropathic pain inhibition factor.

• The Korean Journal of Pain
• /
• v.33 no.2
• /
• pp.121-130
• /
• 2020

Background: Transcutaneous electrical nerve stimulation (TENS), manual acupuncture (MA), and spinal cord stimulation (SCS) are used to treat a variety of pain conditions. These non-pharmacological treatments are often thought to work through similar mechanisms, and thus should have similar effects for different types of pain. However, it is unclear if each of these treatments work equally well on each type of pain condition. The purpose of this study was to compared the effects of TENS, MA, and SCS on neuropathic, inflammatory, and non-inflammatory pain models. Methods: TENS 60 Hz, 200 ㎲, 90% motor threshold (MT), SCS was applied at 60 Hz, an intensity of 90% MT, and a 0.25 ms pulse width. MA was performed by inserting a stainless-steel needle to a depth of about 4-5 mm at the Sanyinjiao (SP6) and Zusanli (ST36) acupoints on a spared nerve injury (SNI), knee joint inflammation (3% carrageenan), and non-inflammatory muscle pain (intramuscular pH 4.0 injections) in rats. Mechanical withdrawal thresholds of the paw, muscle, and/or joint were assessed before and after induction of the pain model, and daily before and after treatment. Results: The reduced withdrawal thresholds were significantly reversed by application of either TENS or SCS (P < 0.05). MA, on the other hand, increased the withdrawal threshold in animals with SNI and joint inflammation, but not chronic muscle pain. Conclusions: TENS and SCS produce similar effects in neuropathic, inflammatory and non-inflammatory muscle pain models while MA is only effective in inflammatory and neuropathic pain models.

• The Journal of Internal Korean Medicine
• /
• v.33 no.1
• /
• pp.83-101
• /
• 2012

Objectives : This study was aimed to investigate the therapeutic effect of Bogijetongtanggammi-bang (BJTG) on injury of the peripheral nerve tissues. Methods : Rats were divided into 2 groups. The rats of the first group were injected with Taxol (1.25 mg/kg) to their sciatic nerves, once each. The sciatic nerves of the rats of the second group were crushed by forcept for 30 seconds. Rats were administered with BJTG (400 mg/kg) or 0.9% saline for 5 days. Changes of DRG neurons, Schwann cells, Cdc2, caspase 3. phospho-p44/42 Erk1/2, phospho-vimentin and ${\beta}1$ integrin were observed by fluorescent microscope and analysed in western blot. Results : In Taxol-treated SD rat models, BJTG up-regulated neurite outgrowth, Schwann cells, Cdc2 and phospho-Erk1/2, and down-regulated caspase 3. In pressure-injured rat models, BJTG up-regulated axons of sciatic nerve, Schwann cells, Cdc2, phospho-vimentin, ${\beta}1$ integrin, and down-regulated caspase 3. Conclusions : Taken together, BJTG was promotive of nerve regeneration on SNI as well as Taxol-induced nerve injury. BJTG had a pharmaceutical property enhancing recovery of injured peripheral nerves and could be a candidate for drug development after further research.

• The Plant Pathology Journal
• /
• v.33 no.3
• /
• pp.288-295
• /
• 2017

Fig mosaic disease (FMD) is a viral disease that spreads in all Tunisian fig (Ficus carica L.) orchards. RT-PCR technique was applied to leaf samples of 29 fig accessions of 15 fig varieties from the fig germplasm collection of High Agronomic Institute (I.S.A) of ChattMariem, to detect viruses associated to FMD. Analysis results show that 65.5% of the accessions (19/29) and 80.0% (12/15) of the fig varieties are infected by FMD-associated viruses. From all fig accessions, 41.4% of them are with single infection (one virus) and 24.1% are with multi-infections (2 virus and more). Viruses infecting fig leaf samples are Fig mosaic virus (FMV) (20.7%), Fig milde-mottle-associated virus (FMMaV) (17.25%), Fig fleck associated virus (FFkaV) (3.45%), and Fig cryptic virus (FCV) (55.17%). A reliable protocol for FCV and FMMaV elimination from 4 local fig varieties Zidi (ZDI), Soltani (SNI), Bither Abiadh (BA), and Assafri (ASF) via in vitro culture of 3 meristem sizes was established and optimized. With this protocol, global sanitation rates of 79.46%, 65.55%, 68.75%, and 70.83% respectively for ZDI, SNI, BA, and ASF are achieved. For all sanitized varieties, the effectiveness of meristem culture for the elimination of FCV and FMMaV viruses was related to meristem size. Meristem size 0.5 mm provides the highest sanitation rates ranging from 70% to 90%.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.1
• /
• pp.23-37
• /
• 2023

One type of biomass that has promising potential for bio pellet production is spent coffee grounds (SCGs). However, previous studies have shown that SCGs in bio pellets cause a lot of smoke. Therefore, they need to be mixed with a material that has a higher calorific value to produce better quality pellets. One material that can be used is pine wood because it has a natural resin content that can increase the calorific value. The aim of this study was to examine the quality of bio pellets produced with SCGs and pine wood charcoal at different particle sizes. The charcoal was ground using either a hammer mill (HM) or a ball mill (BM). Pine wood charcoal was mixed with SCGs at ratios of SCGs to pine wood charcoal of 4:6 and 6:4 by weight, respectively, and the adhesive used a tapioca with a composition ratio 5% of the raw material. The bio pellets were produced using a manual pellet press. The quality of the bio pellets was assessed based on Indonesian National Standard (SNI) 8021-2014, and the physical observations include flame length, burning rate, and compressive strength. The average water content, ash content, and calorific value of the bio pellets were in accordance with SNI 8021-2014, but the density and ash content values were below the standard values. The BM variation of bio pellets had a higher compressive strength than the HM variation, and the 4:6 BM variation had the longest burning time compared with 4:6 HM.

• Journal of Life Science
• /
• v.19 no.8
• /
• pp.1170-1176
• /
• 2009

Porcine reproductive and respiratory syndrome virus (PRRSV) has plagued pig populations worldwide causing severe economical impacts. In order to establish effective strategies for prevention of PRRS, infection patterns on the herd level are primarily evaluated. In the present study, therefore, serological and virological analyses were conducted in 20 pig farms suffering from PRRS. Seroprevalence levels in each farm were grouped into 3 patterns: SN (Stable sow groups/Not infected piglet groups, SI (Stable sow groups and Infected piglet groups), and UI (Unstable sow groups and Infected piglet groups). The rates of each serological pattern were 15% (n=3), 10% (n=2), and 75% (n=15), respectively. In addition, the pattern analysis was extended to virological monitoring on the same farms that further included suckling pig groups. As a result, the infection pattern was classified into 4 categories: SNI (Stable sow groups/Not infected suckler groups/Infected piglet groups), SII (Stable sow groups/Infected suckler groups/Infected piglet groups), UNI (Unstable sow groups/Not infected suckler groups/Infected piglet groups), and UII (Unstable sow groups/Infected suckler groups/Infected piglet groups). The rates of each viroprevalence were estimated at 50% (n=10), 30% (n=6), 10% (n=2), and 10% (n=2), respectively. PRRSV viroprevalence results of suckling pig groups revealed that 8 farms were considered virus positive. In 2 farms among these farms, PRRSV appeared to be transmitted vertically to suckling piglets from their sows. In contrast, piglet-to-piglet horizontal transmission of PRRSV seemed to occur in sucking herds of the remaining farms. Thus, this virological analysis on suckling piglets will provide useful information to understand PRRSV transmission routes during the suckling period and to improve a PRRS control programs. Our seroprevalence and viroprevalence data found that infection patterns between sow and piglet groups are not always coincident in the same farm. Remarkably, 15 farms belonging to the UI seroprevalence pattern showed four distinct viroprevalence patterns (SNI; 7, SII; 4, UNI; 2 and UII; 2). Among these farms, 11 farms with unstable seroprevalence sow groups were further identified as the stable viroprevalence pattern. These results indicated that despite the absence of typical seroconversion, PRRSV infection was detected in several farms, implying the limitation of serological analysis. Taken together, our data strongly suggests that both seroprevalence and viroprevalence should be determined in parallel so that a PRRS control strategies can be efficiently developed on a farm level.

• Journal of Korean Academy of Nursing
• /
• v.9 no.1
• /
• pp.31-40
• /
• 1979

The purpose of the study was undertaken to present transition of school nurses to analyze some factors related to them. 1. Overage increase rate of school nurses the year of 8 years (1970 - 1978) was 4.61% for the primary school, 2.14% for the middle school, and 15.26% for the high school which was the highest. The total number of school nurses was 1289. 2. The percentage of school working school nurses to the total schools was 14.6％ for the primary school, 7.1% for the middle school, and 15.2% for the high school in 1918. In Seoul was largest of 66.7% while that of kyongsangnamdo showed the lowest of 1.5%. 3, In 1978, the increase of school nurses was 17.9% for the private school which was highest while that of the nation and public school showed the lowest of 12.4%. 4. Studies for the Primary, middle and high school per school nurses in 1979 were 5,981.14,923.7,655 respectively. 5. Considering the age distribution of the total school nurses for the primary, middle and high schools was the most of 54.1% in 20s. Regarding the, career of school nurses, those who had worked for less than 5 years were 46.4% in 1970, while 51.8% in 1978. And the school nurses who had worked for less than 10 years reduced 71.3% from 82.7%. 6, There were close relationship between the number of school nurses and that of school, and a regression formular made as follow: SNi = -24.497+0.675 Si+ 0,196 Ni (School) (Nurses).

• Proceedings of the Korean Geotechical Society Conference
• /
• 2007.09a
• /
• pp.78-89
• /
• 2007

Two design examples of deep foundations for high-rise buildings on soft ground are introduced in this paper. The first one is a 54-story building in Ho-Chi-Minh city, Vietnam, which was designed to be founded on $2.8m{\times}1.0m$ barrette foundations with approximately 60m to 75m depth. Based on a number of design guides and existing load test data from the construction sites in Ho-Chi-Minh city, the capacity of a barrette foundation in sand or clay layered ground was calculated to be 17.2MN to 27.8MN depending on the installing depth. The second one is a 40-story building in Baku city, Azerbaijan, which was designed to be supported by 2.0m diameter bored pile foundations with approximately 23m depth. As analytical or empirical guides for the local ground conditions were very limited, the design procedure from the SNiP Code, one of Russian specifications, was adopted and used to calculate the pile capacity. The capacity of bored pile foundation in highly weathered soil was expected to be 14.8MN to 15.5MN depending on the boring depth.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.4
• /
• pp.503-512
• /
• 2020

Using Na₂CO₃ versus NaCl as chemical activator, we compared the quality of activated carbon produced from oil palm fronds as raw material. These activators were selected for comparison because both are readily available and are environmentally friendly. In the manufacturing, we used Indonesian National Standard (SNI 06-3730-1995) parameters. For the quality comparison, we determined activated-carbon yield, moisture, ash, volatiles, and fixed-carbon contents; and adsorption capacity of iodine. The best characteristics, assessed by morphological surface analysis and Fourier transform infrared (FTIR) spectral analysis, were observed in the carbon activated by Na₂CO₃ at an activator concentration of 10% and carbonization temperature of 400 ℃. The results were as follows: activated-carbon yield, 84%; water content, 8.80%; ash content, 2.20%; volatiles content, 14.80%; fixed-carbon content, 68.60%; and adsorption capacity of iodine, 888.51 mg/g. Identification using the FTIR spectrophotometer showed the presence of the functional groups O-H, C=O, C=C, C-C, and C-H in the Na₂CO₃-activated carbon.