• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.1
• /
• pp.102-107
• /
• 2006

This study investigates the properties as the difference friction welding area on SM25C steel rod. The tensile and bending strength and of welded joints, the hardness distribution of welds, the microstructure of welds and the tensile fracture surfaces were mainly investigated through this experiment. The fixed friction welding conditions were revolution 2000rpm, friction pressure 70Mpa, friction time 1.5sec, upset pressure 100Mpa, upset time 2.0sec, upset length 2.8mm and changeable friction welding parameter was friction welding area.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.4
• /
• pp.31-38
• /
• 2012

In this paper, we selected primary cutting parameters that influence on surface roughness of cut bottom surface in end-milling for SM25C material. Those are overhang, depth of cut, feed rate and spindle speed. And then performed orthogonal array experiment and ANOVA by Taguchi method to determine that improved level combination of cutting parameters for betterment of working efficiency and surface roughness one of quality characteristics. And we verified a advisability of prediction model by verification test about level combination. From the results, main cutting parameter influences on surface roughness is spindle speed and the next is feed rate.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.179-179
• /
• 2008

$BaTiO_3$를 기본조성으로 하는 PTC 써미스터는 Curie 온도이상에서 저항이 급격히 상승하는 산화물 반도체 세라믹이다. 이러한 성질을 이용하여 degaussing 소자, 정온 발열체, 온도센서, 전류 제한소자 등 상업적으로 여러 분야에서 연구되고 있다. 또한 원가절감 등을 위하여 Ni 내부전극을 사용하여 환원 분위기에서 소결하는 칩 타입에 대한 연구가 진행되고 있다. 본 연구에서는 Sm 함량(0.1at%~1.0at%)을 달리한 $BaTiO_3$(Si, Mn, Ca) 계를 선택하여 3%$H_2/N_2$ 분위기에서 1200~$1260^{\circ}C$, 2h 소결한 후 공기 중에서 재산화 처리하고 재산화 시간에 따른 PTC 특성 변화에 대하여 고찰하였다. 재산화 온도와 시간은 각각 $800^{\circ}C$와 0.5h~10h으로 하였다. Sm 함량을 달리하여 환원 분위기에서 소결한 시편의 미세구조와 PTC 특성과의 상관관계를 관찰한 결과, 소결온도가 낮을수록 PTC 특성은 좋아졌으며, 상온 비저항은 Sm 함량이 높아질수록 낮아졌다. 또한 Sm 함량이 높아질수록 jumping ratio$(R_{max}/R_{25^{\circ}C})$는 낮아졌다. 재산화 시간에 따른 PTC 특성은 다소 떨어졌지만 소결온도에 따라 달리 나타났다. Jumping ratio$(R_{max}/R_{25^{\circ}C})$는 Sm을 0.7 at% 첨가한 계에서 재산화를 1시간 처리한 시편에서 가장 우수하였다.

• Journal of the Korean Ceramic Society
• /
• v.46 no.3
• /
• pp.330-335
• /
• 2009

We investigated the effects of the re-oxidation temperature and time on the positive temperature coefficient (PTC) of resistivity characteristics of Sm-doped $BaTiO_3$ sintered at $1200{\sim}1260^{\circ}C$ for 2 h in a reducing atmosphere (3% $H_2/N_2$), followed by re-oxidization processes in air, in which re-oxidization temperature and time were $600{\sim}1000^{\circ}C$ and $1{\sim}10$h, respectively. The result reveals that Smdoped (Ba,Ca)$TiO_3$ ceramics fired in a reducing atmosphere exhibit low PTC characteristics, whereas the sample re-oxidized at $800^{\circ}C$ for 1 h in air exhibit pronounced PTC characteristics. The room-temperature resistivity and jumping characteristics of resistivity (${\rho}_{max}/{\rho}25^{\circ}C$) decrease with Sm contents. The PTC characteristics with reoxidization time at $800^{\circ}C$ have improved about $2{\sim}3$ orders of magnitude whereas differed according to the sintering temperature. The 0.7 at% Sm-doped (Ba,Ca)$TiO_3$ samples reveal the best PTC characteristics in the present range of formula and processes.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.6
• /
• pp.841-846
• /
• 2010

The present study examined the mechanical properties of the friction welding with hollow and solid shaft of SM45, of which the diameter is 25.2mm and 33mm. Friction welding was conducted at welding conditions of 2,000rpm, friction pressure of 50MPa, upset pressure of 70MPa, friction time of 0.4sec to 1.4sec by increasing 0.2sec, upset time of 2.0 sec including variable such as friction time are following. Under these conditions, a tensile test, a hardness test and a microstructure of weld interface were studied. The results were as follows : When the friction time was 1.0 seconds under the conditions, the maximum tensile strength of the friction weld happened to be 1,094MPa, which is 120% compared with the tensile strength of SM45C base metal. The upset length linearly increased as friction time increased. According to the hardness test, the hardness distribution of the weld interface was formed from 475Hv to 739Hv. HAZ(Heat Affected Zone) was formed from the weld interface to 2mm of SM45C.

• The Journal of the Korean Society for Microbiology
• /
• v.14 no.1
• /
• pp.49-61
• /
• 1979

Two hundred and ninety-five strains of Peudomonas aeruginosa isolated from clinical sources were tested for drug resistance and demonstration of R plasmids by intraspecies conjugation system. Sixty strains were found highly resistant to two or more of drugs. The rate of resistant strains were 38.9% to kanamycin(km), 33.2% to streptomydn(sm), 22.7% to sulfisomidine(Sa), 14.2% to chloramphenicol(Cp), 13.8% to tetracycline(Tc), 3.0% to carbenicillin(Cb), and to gentamicin(Gm), respectively. But no strains was resistant to nalidixic acid and colistine. They were resistant to per milliliter to more than $400{\mu}g$ per ml. of Tc, $800{\mu}g$ per ml of Cp and of Sm, $6,400{\mu}g$ per ml. of Sa, $200{\mu}g$ per ml. of Cb, $100{\mu}g$ per ml. of Gm, and $25{\mu}g$ per ml. of colistine. Forty-three strains of Pseudomonas aeruginosa could be transferred their resistance to Pseudomonas aeruginosa 2-70, 1005 rifampin resistant FP-auxotrophic mutant. Of sixty multiple resistant strains, forty-three(71.6%) demonstrated R plasmids; nineteen carried resistance to(Tc Cp Sm Sa), six to(Tc Cp Sm), three to(Tc Cp Sa), and Cp, five to(Tc Sm Sa), two to(Tc Sa), (Cp Sm) and Tc, and one to(Cp Sm Sa). Degree of resistance of recipients recieving R plasmids from donors were almost the same level of resistance as the donor in regardless of mating temperature at $25^{\circ}C$ and $37^{\circ}C$. Resistance to Tc, Sm, and Sa were transferred to a very few of recipient cells at five minutes after mating with donor and recipient cells but resistance to Cp were transferred to the majority of recipient cells. The transfer frequency of Tc, Cp, Sm, and Sa resistance from donors to recipients were from $1.0^{-1.4}\;to\;1.0^{-3.5}$ at $25^{\circ}C$ for 18 hours of incubation and were from $1.0^{-1.5}\;to\;1.0^{-3.5}$ at $37^{\circ}C$ for 18 hours of incubation.

• Plant Resources
• /
• v.3 no.3
• /
• pp.179-183
• /
• 2000

The present study was carried out to clarify the chromosome numbers and karyotype of Atractylodes japonica Koidz. ex Kitam. and A. macrocephala Koidz.. The somatic chromosome numbers of two species were same; basic chromosome number x=12, and somatic chromosome numbers 2n=24. The present result of A. japonica Koidz. ex Kitam. was same to previously reports and that of A. macrocephala Koidz. was reported first in this study. Size and shape of chromosome were some different from A. japonica Koidz. ex Kitam. and A. macrocephala Koidz.. The karyotype of A. japonica Koidz. ex Kitam. was described as follows; 2n : 24 : 8L + 14M +2S : 2 $A^{sm}$ +2 $B^{m}$ +2 $C^{m}$ +2 $D^{st}$ + 2 $E^{m}$ +2 $F^{m}$ +2 $G^{m}$ +2 $H^{sm}$ + 2 $I^{m}$ + 2 $J^{m}$ + 2 $K^{m}$ + 2 $L^{m}$ . And the karyotype of A. macrocephata Koidz. was described as follows; 2n : 24 : 10L +12M +25 : 2 $A^{m}$ +2 $B^{sm}$ +2 $C^{sm}$ +2 $D^{sm}$ +2 $E^{sm}$ +2 $E^{sm}$ +2 $G^{sm}$ +2 $H^{m}$ +2 $I^{m}$ 2 $J^{m}$ +2 $K^{m}$ +2 $L^{m}$ . .

• Journal of Biosystems Engineering
• /
• v.37 no.1
• /
• pp.58-64
• /
• 2012

Purpose: The objective of this study was to investigate the feasibility of anaerobic digestion of Chinese cabbage waste juice (CCWJ) and swine manure(SM). Methods: The anaerobic digestion test was conducted under batch and continuous conditions at mesophilic temperature ($36-38^{\circ}C$). The batch test was divided into Experiment I and II. In the Experiment I, biogas potential and production rate of CCWJ was evaluated. In Experiment II the effect of F/M ratio (2.0, 3.2, 4.9) at mixture ratio of 25:75(CCWJ: SM, % vol. basis) on biogas yield was studied. Results: CCWJ produced biogas and methane yield of 929 and 700 mL/g VS added respectively. The biogas yield from the mixture of CCWJ and SM was almost same at F/M ratio of 2.0 and 3.2 but dropped by 14% when F/M ratio increased from 3.2 to 4.9. In continuous test the mixture of CCWJ and SM (25:75, % vol. basis) produced biogas yield of 352 mL/g VS added which is around 11% higher compared to biogas yield from SM alone. Addition to biogas yield digester performance was also improved with co-digestion of CCWJ with SM. Conclusions: The results showed that the anaerobic digestion of CCWJ with SM could be promising for improving both the biogas yield and digester performance at mesophilic temperature.

• Journal of Welding and Joining
• /
• v.25 no.6
• /
• pp.53-58
• /
• 2007

The present study examined the mechanical properties of the friction welding of shaft made of SKH51 and SM45C, of which the diameter is 12mm. Friction welding was done at welding conditions of 2,000rpm, friction pressure of 104MPa, upset pressure of 134MPa, friction time of 0.5sec to 2.5sec by increasing 0.5sec, upset time of 2 seconds. Under these conditions, a tensile test, a bending test, a shear test, a hardness test and a microstructure of weld interface were studied. When the friction time was 1.0 second under the conditions, the maximum tensile strength of the friction weld observed to be 963MPa, which is 89% the tensile strength of SKH51 base metal and 101% of the tensile strength of SM45C base metal. When the friction time was 1.0 seconds under the conditions, the maximum bending strength of the friction weld happened to be 1,647MPa, which is 78% the bending strength of SKH51 base metal(2,113MPa) and 87% of the bending strength of SM45C base metal(1,889MPa). When the friction time was 1.0 seconds under conditions, the maximum shear strength of the friction weld was observed to be 755MPa, which is 92% the shear strength of SKH51 base metal and 122% of the shear strength of SM45C base metal. According to the hardness test, the hardness distribution of the weld interface varied from Hv282 to Hv327. HAZ was formed from the weld interface to 1.2mm of SKH51 and 1.6mm of SM45C. Upon examination it was found that the microstructure became finer along with increase of friction revolution radius.

• Journal of Microbiology
• /
• v.41 no.2
• /
• pp.102-108
• /
• 2003

A 6.1 kb Sph I fragment from the genomic DNA of Pseudomonas putida SM 25 was cloned into the veetor pUC19. The open reading frame of catB was found to consist of 1,122 nucleotides. The sequence alignment of the catB gene products from different kinds of bacteria revealed an overall identity ranging from 40 to 98%. The catC gene contained an open reading frame of 96 codons, from which a protein with a molecular mass of about 10.6 kDa was predicted. The amino acids in the proposed activesite region of CatC were found to be almost conserved, including the charged residues. Since the catBC genes in P. putida SM25 were tightly linked, the could be regulated under coordinate transcription, and transcribed from a single promoter located upstream of the catB gene, as in P. putida RBI.