• Journal of Food Hygiene and Safety
• /
• v.22 no.2
• /
• pp.105-109
• /
• 2007

This study monitored and compared the contamination levels of total aerobic bacteria, coliform groups and S. aureus of 16 Shrimp Jeotgal (Salt Fermented Shrimp) products from 3 traditional markets (TM), 3 department stores (DS) and 3 super markets (SM) located on seoul, Korea. Moreover this study was carried out to survey the concentrations of NaCl and heavy metal (lead; Pb) of the Shrimp Jeotgal. The contamination levels of total aerobic bacteria in the Shrimp Jeotgai were $3.35log_{10}CFU/g$ as a mean and $3.71log_{10}CFU/g$ for TM, $3.16log_{10}CFU/g\;for\;DS,\;2.84log_{10}CFU/g$ for SM. The coliform groups were contaminated in 50% of Shrimp Jeotgal and it means that the hygienic control is needed urgently. S. aureus were not detected in every sample. The levels of NaCl were between 17.9 and 28.5%. Heavy metal (lead; Pb) was detected in only 1 product at the level of 0.02 ppm out of 16 products. Although microbiological contamination levels of Shrimp Jeotgal were not much high, hygienic management like HACCP is thought to be needed for the production of Shrimp Jeotgal in traditional market.

• The korean journal of orthodontics
• /
• v.30 no.2 s.79
• /
• pp.215-222
• /
• 2000

The purpose of this study was to determine whether the application of chlorhexidine varnish affects the shear bond strength and failure pattern of orthodontic brackets or not. The experimental group consisted of 22 human premolars which extracted after chlorhexidine varnish application (4 times for 1 week interval) in vivo, and the control group consisted of 22 human premolars which extracted without any pre-treatment. After all teeth were etched with $37\%$ phosphoric acid gel, metal orthodontic brackets (Q-3002, RMO, USA) were bonded to each tooth using auto-polymerizing orthodontic resin (Ortho-One, Bisco, USA) with the same bonding procedure. The shear bond strength was measured with Instron universal testing machine (model 4466, Instron Ltd., England), and the failure pattern of each bracket was examined with Scanning Electron Microscope (SM 840A, JEOL, Japan). The data were analysed statistically with t-test. The results were as follows : 1. Application of chlorhexidine varnish had no significant effect on the shear bond strength of the orthodontic bracket. 2. There was no significant difference in the failure pattern of orthodontic bracket between the experimental group and the control group.

• Journal of Life Science
• /
• v.18 no.7
• /
• pp.1019-1022
• /
• 2008

The chromosome numbers and compositions were investigated in four cultivated species of Cucurbitaceae; Cucumis sativus L., Citrullus lanatus (Thunb.) Matsum. et Nakai, Cucumis melo L., Luffa cylindrica (L.) Roemer. through general aceto-orcein staining method. The chromosome compositions of four species were diploids of 2n=22, 2n=24 and 2n=26 respectively. The chromosomes were relatively small and showed gradual length degradation from $2.50\;{\mu}m$ to $2.16\;{\mu}m$ in Cucumis sativus, $3.71\;{\mu}m$ to $2.11\;{\mu}m$ in Cucumis melo, $3.20\;{\mu}m$ to $2.40\;{\mu}m$ in Citrullus lanatus and $3.17\;{\mu}m$ to $1.97\;{\mu}m$ in Luffa cylindrica. The chromosome types consisted of all metacentrics in Cucumis sativus, seven pairs submetacentrics and five pairs metacertrics in C. melo, four pairs of submetacentrics and seven pairs metacertrics in Citrullus lanatus, and two pairs submetacentrics and eleven pairs metacentrics in Luffa cylindrica (L.) Roemer.. The satellites were found in a pair of chromosomes in C. melo and two pairs in Luffa cylindrica. The chromosome compositions in these four species showed species-specific patterns and seemed to provide useful informations for breeding and molecular cytogenetic works on Cucurbitaceae.

• The Korean Journal of Pesticide Science
• /
• v.20 no.1
• /
• pp.56-65
• /
• 2016

Pine wood nematode, Bursaphlenchus xylophilus is a fatal damaging pest, infecting pinewood trees and is one of the serious forest pest in Korea. Trunk injection is one of the most effective method to protect the live pine trees from nematode infection. The aim of this research was to reveal the efficacy of the nematicidal materials from 46 Kyrgyzstan, 88 Vietnam plant materials and 21 active materials (${\alpha}$-terpinene, ${\alpha}$-pinene, ${\beta}$-thujaplicin, cinnamaldehyde, eugenol, emodin, geraniol, limonone, methyl palmitate, matrine, myrcene, methyl gallate, nicotine, quassin, resveratrol, rotenone, thymol, thujaplicin, terthiophene, tuberstemonine, ${\gamma}$-terpinene) isolated from plants for using as trunk injection agents. Eclipta prostrata extract was highly effective against pine wood nematode in plant extracts and terthiophene has the best nematicidal activity from active materials isolated from plants. Foliar spray of terthiophene on Japanese black pine (Pinus thunbergii) tree reduced proliferation of inoculated pine wood nematode at 22 days after treatment, however no efficacy was found over 22 days. Eclipta prostrata extract and terthiophene can be used as nematicide for further nematicidal efficacy test against any other plant parasitic nematodes and trunk injection efficacy against pine wood nematode.

• Journal of Yeungnam Medical Science
• /
• v.22 no.1
• /
• pp.96-103
• /
• 2005

The motor recovery mechanism of a 21-year-old male monoparetic patient with cerebral palsy, who had complained of a mild weakness on his right hand since infancy, was examined using functional Magnetic Resonance Imaging (fMRI) and Transcranial Magnetic Stimulation (TMS). The patient showed mild motor impairment on the right hand. MRI located the main lesion on the left precentral knob of the brain. fMRI was performed on this patient as well as 8 control subjects using the Blood Oxygen Level Dependent technique at 1.5 T with a standard head coil. The motor activation task consisted of finger flexionextension exercises at 1 Hz cycles. TMS was carried out using a round coil. The anterior portion of the coil was applied tangentially to the scalp at a 1.0 cm separation. Magnetic stimulation was carried out with the maximal output. The Motor Evoked Potentials (MEPs) from both Abductor Pollicis Brevis muscles (APB) were obtained simultaneously. fMRI revealed that the unaffected (right) primary sensori-motor cortex (SM1), which was centered on precentral knob, was activated by the hand movements of the control subjects as well as by the unaffected (left) hand movements of the patient. However, the affected(right) hand movements of the patient activated the medial portion of the injured precentral knob of the left SM1. The optimal scalp site for the affected (right) APB was located at 1 cm medial to that of the unaffected (left) APB. When the optimal scalp site was stimulated, the MEP characteristics from the affected (right) APB showed a delayed latency, lower amplitude, and a distorted figure compared with that of the unaffected (left) APB. Therefore, the motor function of the affected (right) hand was shown to be reorganized in the medial portion of the injured precentral knob.

• Journal of Biosystems Engineering
• /
• v.30 no.1 s.108
• /
• pp.8-16
• /
• 2005

The extrusion-cooking condition on Cordyceps pruinosa was designed using twin-screw extruder. Response surface methodology (RSM) was used to investigate extrusion-cooking using a central composition design with varying die temperature $(114-146^{\circ}C)$, feed moisture $(22-38\%)$, feed rate (4-14 ka/h) and screw speed (120-280 rpm). System parameters (die pressure and specific mechanical energy (SME)) and extrudate parameters (density and water solubility index (WSI)) were statically analyzed using RSH. Die pressure was significantly affected by temperature, moisture contents and feed rate. SM was affected by screw speed and feed rate. When die temperature is $130^{\circ}C$ and moisture content $25\%$, the optimum pressure is shown. SME is about 20 Wh/kg, when feed rate is $10\~12kg/min$ and screw speed $200\~250rpm$. WSI was affected by temperature and moisture contents. Density was not affected by any factor. WSI increases by $7\%$ from about $23\%$ to about $30\%$, as temperature is raised from $120^{\circ}C\;to\;140^{\circ}C$. The WSI of Cordyceps pruinosa pulverized after extruding (PE) is about $26.97\%$ higher than that of raw material and $10\%$ higher than that of pulverized after drying (PD). The content of unsaturated fatty acid were not significantly different in PD and PE. Anti-oxidative activity of PE was 1.67-2.2 times higher than that of PD in Cordyceps pruinosa using 1- dipheny1-2-picrylhydrazyl method (DPPH).

• Economic and Environmental Geology
• /
• v.22 no.2
• /
• pp.151-166
• /
• 1989

A study of rare-earth mineralization in Kyemyungsan metasedimentary formation of Precambrian Ogcheon Group was carried out in the Mt. Eore Area near Choongju City based on the thorium (Th) and uranium (U) count data of geophysical airborne survey. This rare-earth mineralization was found in the magnetite-bearing banded quartizite which contains diagnostically some amounts of the metamict allanite. The brown colored allanites are distributed as aggregates of fine grains and sometimes banded structures with magnetite (inter growth) along the banding. The ore bed is displaced by the small faults and granite intrusions, and separated 5 ore blocks. The dimensions of the outcrop are 50-80 m in width, 1,500 m in length with the strike of $N70-80^{\circ}E$ and dip of $50-80^{\circ}NW$. In the field, the values of total gamma ray count of GR-101A scintillometer were able to measure more than 400 cps and maximum 1,500 cps, which data are coincided with the values of GR-310 gamma ray spectrometer and the gamma ray count of well logging data. The chemical compositions of the allanites from EPMA data are ranged from$\sum^{TR_2O_3}$ 18.57% to 26.00%, and the cerium oxides ($Ce_2O_3$) of allanite are positive relation with $La_2O_3$, MgO, FeO, MnO and negative relation with $SiO_2$, $Al_2O_3$, $Nd_2O_3$. The result of Neutron Activation Analysis (N.A.A.), Multi-Channel Analysis (M.C.A.) and wet chemistry of 25 outcrop samples for the elements of REE, Zr, U, Th shows strong anomalies. The good correlation elements with the thorium (Th) are the elements of La, Ce, LREE, $TR_2O_3$, Pr, Sm, Yb, Lu by the increasing order.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11b
• /
• pp.878-881
• /
• 2010

For better diagnosis and prescription in Korean traditional medicine, Lee Je-Ma (1837-1900) created Sasang Constitution classification which was divided into four groups of Taeyangin, Soyangin, Taeumin and Soumin based on both body shape and natural disposition. The purpose of this study was to investigate the characteristics of facial skin parameters (hydration, lipid and pH) on forehead and cheek according to Sasang Constitution classifications of Taeumin, Soyangin and Soumin in Korean. Eighty-nine Korean female subjects were recruited for this study and the average age of them was 19.9${\pm}$0.84 years. The four groups by the Sasang Constitution were classified by questionnaire for the Sasang Constitution classification proposed by Kyung-Hee Oriental Medicine Hospital. Consequently, thirty-eight (42.7%) among the subjects were grouped into Soumin, twenty-nine (32.6%) into Taeumin, twenty (22.5%) into Soyangin and two (2%) into Taeyangin. Taeyangin group was excluded from statistical analysis due to small subjects. Hydration, lipid and pH parameters on forehead and cheek were measured by using non-invasive instruments of Corneometer (CM 825, Schwarzhaup, Germany), Sebumeter (SM 815, Schwarzhaup, Germany) and Skin-pH-meter (pH 905, Schwarzhaup, Germany), respectively. The measurements by the same investigator were performed under standardized condition with a room temperature of $21^{\circ}C$ and a humidity level of 40% to 50%. As a result, hydration (F=25.481, p=.000), lipid (F=5.753, p=.005) and pH (F=5.010, p=.009) of the forehead skin showed significant differences in the order of Taeumin, Soyangin and Soumin. Hydration (F=23.216, p=.000), lipid (F=6.898 p=.002) and pH (F=5.070, p=.008) of the cheek skin showed significant differences in the order of Taeumin, Soyangin and Soumin. In conclusion, facial skin surface seemed to be dependent on Sasang Constitution classification in Korean. These findings indicated that Sasang Constitution classification might be an useful esthetic treatment for caring facial skin in the future.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.6
• /
• pp.1327-1334
• /
• 1988

In this study rotating bending fatigue tests have been carried out with the deep non-through radial holed notch specimens of low carbon steels(SM 22C). It is investigated that the behaviors of surface and interior fatigue crack propagation and the variations of the shape of the cracked surface on the magnitude of bending stresses. The Obtained results are summarized as follows. (1) The relations between [Crack length] and [Cycle ratio] are expressed by following eq. in the 0.1~0.6 range of N/ $N_{f}$ long[ crack length] = A + B [N/ $N_{f}$ ] In case of surface crack length, values of A and B are uniformed independent upon the magnitude of bending stress, but those are variable according to the magnitude of bending stress for interior crack length. (2) The following eq. is derived on the surface crack propagation rate, bending stress and surface crack length. (dl/dN)=(3.94*10$^{-12}$ ).sigma.$^{4.54}$l (3) Under small stress, interior crack propagation rate increase with the interior crack growth but it decrease for large stress. (4) The shape of cracked surface depends upon the magnitude of bending stress. Under small stress fatigue crack propagates as an semi-ellipse with semi-major axis of surface crack length with semi-major axis of interior crack length for large stress.s.

• Journal of the Korean Society of Safety
• /
• v.26 no.1
• /
• pp.1-7
• /
• 2011

When the pumps stopped in the operation by the power failure, the hydraulic transients take place in the sudden change of a velocity of pipe line. Each and every water hammer problem shows the critical stage to be greatly affected the facts of safety and reliability in case of power failure. The field tests of the water hammer executed at Cheong-Yang booster pump station having an air chamber. The effects were studied by both the practical experiments and the CFD(Computational Fluid Dynamics : Surge 2008). The result states that the system with water hammering protection equipment was much safer when power failure happens. The following data by a computational fluid dynamic analysis are to be shown below, securing the system stability and integrity. (1) With water hammering protection equipment. (1) Change of pressure : Up to $15.5\;kg/cm^2$ in contrary to estimating $16.88\;kg/cm^2$. (2) Change rate of water level : 52~33% in contrary to estimating 55~27%. (3) Note that the operational pressure of pump runs approx. 145 m, lowering 155 m of the regularity head of pump. (4) Note that the cycle of water hammering delays from 80 second to 100 second, together with easing the function of air value at the pneumatic lines. (2) Change of pressure without water hammering protection equipment : Approximate $22.86\;kg/cm^2$. The comprehensive result says that the computational fluid dynamics analysis would match well with the practical field-test. It was able to predict Max. or Min. water hammering time in a piping system. This study aims effectively to alleviate water hammering in a pipe line to be installed with air chamber at the pumping station and results in making the stability of pump system in the end.