• 설비공학논문집
• /
• 제18권7호
• /
• pp.603-611
• /
• 2006

A variety of schemes were sought for a mitigation of thermal stratification phenomenon in the branch piping of domestic nuclear power plant. Several mechanisms of thermal stratification occurrence were introduced in this paper. A number of factors were selected to find out the schemes for thermal stratification mitigation and the computational analysis were performed. The length of vertical branch piping, the diameter, the radius of curvature of the elbow, the direction of connection between main piping and branch piping, the slope of branch piping, the leakage flow rate, the installation of additional valve, the change of the 1st valve position and another branch piping connected with branch piping were mentioned as factors in this paper.

• 로봇학회논문지
• /
• 제5권2호
• /
• pp.127-134
• /
• 2010

In this paper, a hybrid semi-3D path planning algorithm combining Virtual Tangential Vector(VTV) and fuzzy control is proposed. 3D dynamic environmental factors are reflected to the 2D path planning model, VTV. As a result, the robot can control direction from 2D path planning algorithm VTV and speed as well depending on the fuzzy inputs such as the distance between the robot and obstacle, roughness and slope. Performances and feasibilities of the suggested method are demonstrated by using Matlab simulations. Simulation results show that fuzzy rules and obstacle avoidance methods are working properly toward virtual 3D environments. The proposed hybrid semi-3D path planning is expected to be well applicable to a real life environment, considering its simplicity and realistic nature of the dynamic factors included.

• 융복합기술연구소 논문집
• /
• 제1권1호
• /
• pp.24-28
• /
• 2011

The purposes of this study are predictions of the changes in the section geometry and determination of the initial cross section so that opposite side in height direction is exactly parallel after coiling process. Finite element analysis is carried out for the calculation of the sectional changes for mold spring item. Analysis results reveal that the slope of the top and bottom sides varies in the range of 5 to 8 degrees and the amount depends on the dimension of the outer diameter. The slopes of the sides should be defined first among design variables.

• Bulletin of the Korean Chemical Society
• /
• 제21권4호
• /
• pp.379-382
• /
• 2000

The temperature dependence of the kinetic parameters of the aspartase-catalyzed reaction has been examined in the direction of deamination. The pK1values at 37$^{\circ}C$, 25$^{\circ}C$, 16$^{\circ}C$ and 7$^{\circ}C$ were 6.2 $\pm$ 0.1, 6.3 $\pm$ 0.1, $6.7{\pm}0.3$ and 6.9 $\pm$ 0.3, respectively. On the other hand, the pK2 values at 37$^{\circ}C$,25$^{\circ}C$, 16$^{\circ}C$ and 7$^{\circ}C$ were 8.1 $\pm0.2$, 8.3 $\pm$ 0.2, 8.2 $\pm$ 0.3 and 8.0 $\pm$ 0.2,respectively. The enthalpy of ionization, DHion, calculated from the slope of pK1, are 6.0 $\pm$ 0.3 kcal/mol. These results validate the prediction that aspartase requires a histidine residue for a general base, and a cysteine (or having a carboxyl functional group) for a general acid.

• 한국항행학회논문지
• /
• 제28권3호
• /
• pp.375-378
• /
• 2024

The instrument landing system (ILS) is an international standard established by the International civil aviation organization (ICAO) as one of the landing support facilities for aircraft. This system consists of a localizer (LOC) that provides orientation information about the runway to indicate the approach direction, a glide path (GP) that indicates the appropriate approach glide slope, and three of marker beacons (MB) that indicates the distance to the runway landing edge. In this study, we predicted the received signal strength by altitude and distance for LOC signals transmitted from the ground and analyzed the difference with the signal strength measured in the actual environment. Our objective is to develop signal strength prediction technology and apply it to the real environment.

• 한국해안해양공학회지
• /
• 제8권4호
• /
• pp.297-304
• /
• 1996

본 연구는 pade 근사 또는 minimax 근사법으로 파랑진행방향의 허용범위를 확장시핀 포물선형 완경사방정식의 적용성 및 구조물에 의한 회절파의 비선형성을 고찰하는 데 그 목적이 있으며, 이를 위하여 불투과성의 이안제가 설치된 파랑장에 위 모델을 기본방정식으로 하여 수치계산을 수행한 후, 수리모형 실험치(Watanabe and Maruyama, 1984)와 비교ㆍ분석하였다. 그 결과 구조물의 기하학적 차폐경계를 따라 증가된 회절효과 때문에 비선형 모델의 파고치가 선형 모델의 파고치보다 크게 나타나며, 파랑진행 허용범위각을 크게 확장시킨 모델은 파랑진행각이 큰 영역에서는 측방향으로 파랑에너지를 높은 정도로 전과시키나 파수의 근사에 의한 누적된 오차 때문에 전반적으로 파고치가 왜곡되어 나타남을 알 수 있다.

• 대한지리학회지
• /
• 제36권3호
• /
• pp.217-232
• /
• 2001

우리나라 지형학연구의 가장 중요한 쟁점 중 하나는 산록에 분포하는 사면경사가 완만한 지형면 형성과정 에 대한 논의이다. 경주 남쪽에서 울산에 이르는 불국사단층선을 따라 분포하는 전체 선상계피 지형면을 분류하여 선상지의 공간분포 특징을 밝히고 선상지 형성과정을 검토하였다. 불국사산맥의 서사면에 분포하는 선상지는 불국사 단층선곡을 따라 남-북 방향으로 연속되어 합류선상지를 이루고 있다. 울산만에 인접한 신천-효문지역의 선상지분포 는第四紀 해면변동의 영향을 받았다. 연구지역에 발달된 선상지형성에 기여했을 다양한 요소들 중 중요한 네 가지 는 동결과 융해 가 반복되는 기각이 길어지는 빙기의 기후환경, 동해 쪽에서 내륙 쪽으로 향하는 횡압력에 의해 형성 된 불국사산지 서사면의 급한 사면경사, 이 구조운동에 의해 형성된 불국사단층선곡에 발달된 복수의 지질구조선, 그 리고 침식에 대한 저항력이 약한 불국사화강암과 중생대 퇴적암의 이루어진 이 지역의 기반암의 등으로 정리된다.

• 자원환경지질
• /
• 제13권3호
• /
• pp.159-166
• /
• 1980

A model study was conducted for the investigation of apparent resistivity variation along with electric resistivity variation of host rock and dip variation of bed. Experiments were carried out for the cases of horizontal and dipping beds in a water tank by using Wenner and Schlumberger arrays and by changing salinity of water. The ratios of resistivity values of the bed to that of brine were 1 : 10, 1 : 50, 1 : 100 and 1 : 500. Natural coally-shale of $55cm{\times}35cm{\times}3.5cm$ was used as a bed for experimental model, and brine as a host rock. Equi-resistivity curves and characteristic curves were obtained for each case of the experiment. The equi-resistivity curve was drawn both on the cross section parallel to strike of bed and longitudinal section perpendicular to it. The characteristic curve was drawn on the cross section. In the case of dipping bed of different dips, the curves are parallel to the boundary of the bed in the upper part of the bed, and are inclined to the opposite direction with the same angle of the dip of bed in the lower part. We can deduce, from the equi-resistivity curves, the location, shape and dip of the bed. It is shown in the characteristic curves that when the ratio of resistivity value of bed to that of host rock increases, the slope of curves becomes steeper, location of low-resistivity zone lower, and the width of it narrower. The slope of curves also becomes steeper when dip of bed increases. We can deduce, from the characteristic curves, the ratio of resistivity values between adjacent beds. It was found out from the experiments that electric resistivity method could be applicable to prospecting for underground geology with an electric resistivity contrast of 1 : 10. This fact strongly suggests that distinction of coal from coally-shale could be possible in a certain field condition.

• 농촌계획
• /
• 제18권1호
• /
• pp.9-15
• /
• 2012

This study used GIS method for the characteristic analysis of farmstead location in study area. The present study surveyed the coordinates of location for 76 livestock farmsteads with big size in rural areas within city of Cheonan. Based on the surveyed data, this study analyzed the spatial characteristics of location for the farmsteads by using both new evaluation criteria and their corresponding GIS (geographic information system) layers developed in this research. The criteria consist of six factors, which are 2 geographic factors for slope(SLO) and aspect(ASP) of earth surface, 3 accessability factors for distance from water area(DWA), road(DRO), and built-up area(DBA), including type of landuse(TLA). In the analysis results of six criteria using the grid funcations of GIS, the highest distributed ratios of the farmsteads per criterion were found at the lower slope area less then 2% in SLO, the area with south and south-east direction in ASP, the area with distance between 500m and 1,000m in both DWA and DRO, the area within 500m in DWA, and the paddy and upland area in TLA. As new finding of this study, these analysis results seemed that the farmsteads have been located at the better places with the priority to build and manage conveniently and economically.

• 한국지리정보학회지
• /
• 제21권1호
• /
• pp.106-114
• /
• 2018

수치표고모델(DEM, Digital Elevation Model)은 원격 탐사 기술의 발전으로 제작이 용이해졌다. 최근에는 작업의 요구사항에 따라 무인항공기(UAV)를 이용해서도 고해상도의 수치표고모델을 생산할 수 있지만, 고해상도는 데이터 저장 및 처리에 대한 시간과 비용의 문제를 동반한다. 본 연구에서는 수치표고모델 해상도의 효과를 확인하기 위하여 춘천을 대상 지역으로 하여 다양한 해상도의 수치표고모델로부터 얻은 6개의 지형적 매개변수를 비교하였다. 비교 분석은 지형의 기울기, 곡률, 유수의 방향, 유수의 축적(flow accumulation), 유수의 거리 및 유역에 대한 통계 분석을 기반으로 하였다. 그 결과, 수치표고모델의 표고와 유수의 축적 영역에는 변화가 없음을 확인할 수 있었으나, 기울기, 곡률, 유수의 거리 및 유역의 수는 픽셀 크기가 증가함에 따라 감소하였다. 따라서, 수치표고모델의 해상도는 요구되는 정밀도에 따라 신중하게 선택되어야 한다.