Journal of Institute of Convergence Technology (융복합기술연구소 논문집)
- Volume 1 Issue 1
- /
- Pages.24-28
- /
- 2011
- /
- 2233-8667(pISSN)
Shape Design of Initial Section for Non-circular Shaped Mold Spring
비원형 단면을 갖는 금형스프링의 단면설계
- Lee, Hyoungwook (Department of Energy System Engineering, ChungJu National University) ;
- Choi, Hwaryong (Department of Energy System Engineering, ChungJu National University)
- Received : 2011.04.12
- Accepted : 2011.05.01
- Published : 2011.05.31
Abstract
The purposes of this study are predictions of the changes in the section geometry and determination of the initial cross section so that opposite side in height direction is exactly parallel after coiling process. Finite element analysis is carried out for the calculation of the sectional changes for mold spring item. Analysis results reveal that the slope of the top and bottom sides varies in the range of 5 to 8 degrees and the amount depends on the dimension of the outer diameter. The slopes of the sides should be defined first among design variables.
Keywords