• Transactions on Control, Automation and Systems Engineering
• /
• 제4권4호
• /
• pp.283-288
• /
• 2002

This paper has shown that the impulse and the unit step responses of 2nd-order systems can be computed by an analytic method. Three different 2nd-order systems are investigated: the prototype system, the system with one LHP(left half plane) real zero and the system with one RHP(right half plane) real zero. It has also shown that the effects of the LHP or the RHP zero are very serious when the zero is getting closer to the origin on the complex plane. Based on these analytic results, this paper has presented two sufficient and necessary conditions for 2nd-order linear SISO(single-input/single-output) stable systems to have the nonovershooting and the monotone nondecreasing step response, respectively. The latter condition can be extended to the sufficient conditions for the monotone nondecreasing step response of high-order systems.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.526-528
• /
• 2006

An adaptive output-feedback neural control problem of SISO strict-feedback nonlinear system is considered in this paper. The main contribution of the proposed method is that it is shown that the output-feedback control of the strict-feedback system can be viewed as that of the system in the normal form. As a result, proposed output-feedback control algorithm is much simpler than the previous backstepping-based controllers. Depending heavily on the universal approximation property of the neural network (NN) only one NN is employed to approximate lumped uncertain nonlinearity in the controlled system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.349-351
• /
• 2004

The classical dynamic backpropagation learning algorithm has the problems of learning speed and the determine of learning parameter. The Extend Kalman Filter(EKF) is used effectively for a state estimation method for a non linear dynamic system. This paper presents a learning algorithm using Dual Extended Kalman Filter(DEKF) for Fully Recurrent Neural Network(FRNN). This DEKF learning algorithm gives the minimum variance estimate of the weights and the hidden outputs. The proposed DEKF learning algorithm is applied to the system identification of a nonlinear SISO system and compared with dynamic backpropagation learning algorithm.

• 제어로봇시스템학회논문지
• /
• 제9권3호
• /
• pp.186-195
• /
• 2003

This paper deals with eigenvalue assignment techniques for linear time-varying systems as a way of achieving feedback stabilization. For this, the novel eigenvalue concepts, which are the time-varying counterparts of the conventional (time-invariant) eigenvalue notions, are introduced. Then, the Ackermann-like formulae for SISO/MIMO linear time-varying systems are proposed. It is believed that these techniques are the generalized versions of the Ackermann formulae for linear time-invariant systems. The advantages of the proposed Ackermann-like formulae are that they neither require the transformation of the original system into the phase-variable form nor compute the eigenvalues of the original system. Two examples are given to demonstrate the capabilities of the proposed techniques.

• International Journal of Control, Automation, and Systems
• /
• 제2권4호
• /
• pp.407-422
• /
• 2004

A new method for the design of predictive controllers for SISO systems is presented. The proposed technique allows uncertainties and constraints to be concluded in the design of the control law. The goal is to design, at each sample instant, a predictive feedback control law that minimizes a performance measure and guarantees of constraints are satisfied for a set of models that describes the system to be controlled. The predictive controller consists of a finite horizon parametric-optimization problem with an additional constraint over the manipulated variable behavior. This is an end-constraint based approach that ensures the exponential stability of the closed-loop system. The inclusion of this additional constraint, in the on-line optimization algorithm, enables robust stability properties to be demonstrated for the closed-loop system. This is the case even though constraints and disturbances are present. Finally, simulation results are presented using a nonlinear continuous stirred tank reactor model.

• 산업기술연구
• /
• 제20권B호
• /
• pp.35-43
• /
• 2000

Time Delay Control (TDC) method was proposed as a promising technique in the robust control area, where the plants have unknown dynamics with parameter variations and substantial disturbances are present. In this paper, based on the concepts of TDC, author propose a model reference control method for input/output model. The stability and robustness of the closed system has been analyzed for a class of linear time invarient (LTI) system. Then, in a simulation study, author's design method has been applied to a second order system, the result of which confirmed that the proposed control method performs satisfactorily as predicted.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 추계학술대회
• /
• pp.597-599
• /
• 2010

본 논문에서는 MIMO-OFDM 시스템의 성능 분석을 위해 실제 측정된 채널 데이터를 사용한 수중 채널 모델을 기반으로 OFDM 파라미터들을 설정하였다. 또한, 선형 보간법을 이용한 least square (LS) 채널 추정기법을 이용하여 채널의 상태 정보를 획득하였다. Alamouti code를 이용한 space-time block code (STBC) 및 space-frequency blcok code (SFBC)를 적용하여 그 성능을 평가 및 분석 하였으며, 동시에 $1{\times}2$ maximum ratio combining (MRC)을 적용하여 성능을 비교 분석한 결과, SFBC의 경우 수중 채널의 심각한 주파수 선택적 특성으로 인하여 유효한 BER 특성을 보이지 못하였으나, STBC의 경우 4-column 파일럿 구조를 적용하였을 때, SISO 시스템과 비교하여 약 7dB 정도의 향상된 성능을 나타내고 있음을 확인하였다.

• 한국통신학회논문지
• /
• 제32권6A호
• /
• pp.588-599
• /
• 2007

This paper presents the coexistence issues between M-WiMAX TDD and WCDMA FDD systems. To improve the M-WiMAX system performance and to reduce the adjacent channel interference to WCDMA FDD system, transmit and receive beamforming techniques are applied in the base stations of M-WiMAX system. Furthermore, we propose an adjacent channel interference modeling methodology, which captures the effect of transmit beamforming on the adjacent channel interference. Besides, we verify the performance improvement in the uplink of WCDMA system due to the transmit beamforming in M-WiMAX downlink based on the proposed adjacent channel interference modeling methodology. We also verify the performance enhancement due to the receive beamforming in the uplink of M-WiMAX system through system level Monte Carlo simulations, considering random user position, the effect of shadowing and multi-path fading channel. Discussions on the gain of applying transmit and receive beamforming in M-WiMAX system comparing the case of SISO system are also included. Furthermore, we present the performance of cosited M-WiMAX and WCDMA systems, considering commercial deployment, additional channel filter at base stations and the effects of TxBF and RxBF.

• ETRI Journal
• /
• 제31권5호
• /
• pp.489-499
• /
• 2009

This paper focuses on assessment and design of transmission systems for distribution of digital signals over standard Category-7A copper cables at speeds beyond 10 Gbps. The main contribution of this paper is on the technical feasibility and system design for data rates of 40 Gbps and 100 Gbps over copper. Based on capacity analysis and rate optimization algorithms, system parameters are obtained and the design implementation trade-offs are discussed. Our simulation results confirm that with the aid of a decision-feedback equalizer and powerful coding techniques, namely, TCM or LDPC code, 40 Gbps transmission is feasible over 50 m of CAT-7A copper cable. These results also indicate that 100 Gbps transmission can be achieved over 15 m cables.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.181-184
• /
• 1996

This paper deals with the design problem of model reference adaptive controllers for MIMO plants with unknown orders. A design scheme for an adaptive control system based on CGT theorem, which has hierarchical structures derived from backstepping strategies, is proposed for MIMO plants with unknown orders but with known relative MacMillan degrees(relative degrees for SISO plants). It is also shown that all the signals in the resulting control system are bounded, and that the asymptotic tracking is achieved in the case where reference inputs are step.