• Journal of dental hygiene science
• /
• v.9 no.4
• /
• pp.405-412
• /
• 2009

The purpose of this study investigated the effect of Au coating on adhesion between porcelain matrix and metal substructure interface. Titanium, Ni-Cr alloy and Co-Cr alloy are well known as proper metal for the dental restorations. The success of a porcelain fused to metal (PFM) restoration depends upon the quality of the porcelain-metal bond. However, adhesion between dental alloys and porcelain is related to diffusion of oxygen during ceramic firing. The excessive oxidized layers make hard adhesion between dental alloy and ceramic. Ni-Cr and Co-Cr specimens were divided into test and a control group and Titanium specimens were divided into three test groups and a control group. Each group had 20 specimens. The adhesion characteristics of porcelain and metal with Au coating layer and without Au coating layer were observed with scanning electron microscopy(SEM). The adhesion was evaluated by a biaxial flexure test and volume fraction of adherent porcelain was determined by SEM/EDS analysis. Result of this study suggest that Au coating layer is effective barrier to diffuse oxide layer completely protect non-precious alloys from oxidation during the porcelain firing. The SEM photomicrographs of cross-section specimens showed a smooth interface between Au coating layer and metals and porcelain which suggested proper chemical bonding, and no gap, porosity were observed. The mode of failure was mainly adhesive for Ti tested specimens, but mixed failures with adhesive and cohesive were observed in Ni-Cr and Co-Cr specimens. The adhesion between non-precious metals and porcelain would not be improved by Au coating agent. However, It is suggested that the continuous study is required further investigation and development.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.2
• /
• pp.14-19
• /
• 2011

We have fabricated GaN Schottky barrier diode (SBD) for high-voltage applications on Si substrate. The leakage current and the electrical characteristics of GaN SBD are investigated by annealing metal-semiconductor junctions. Ohmic junctions of Ti/Al/Mo/Au and Schottky junctions of Ni/Au are used in the fabrication. A test structure is proposed to measured buffer leakage current through a mesa structure. When annealing temperature is increased from $700^{\circ}C$ to $800^{\circ}C$, measured buffer leakage current is also increased from 87 nA to 780 nA at the width of 100 ${\mu}m$. The diffusion of Au, Ti, Mo, O into GaN buffer layer increases the leakage current and that is verified by Auger electron spectroscopy. Experimental results show that the low leakage current and the high breakdown voltage of GaN SBD are achieved by annealing metal-semiconductor junctions.

• Korean Journal of Agricultural Science
• /
• v.41 no.3
• /
• pp.229-236
• /
• 2014

This study presents the estimates of heritabilities of body measurement traits and carcass traits, and genetic and phenotypic correlations of those traits for crossbred pigs in Korea. Body and ultrasound (A mode: Piglog 105) measurements in 221 pigs including body weight, length, height and width, three back fat thickness at the points of 4th, 14th rib and chine bone, eye muscle area and lean meat percent were collected at the ages of 70, 145 and 180 days and then slaughtered to measure carcass weight, back fat, belly, collar butt, spare rib, picnic shoulder, hind leg, loin, tenderloin, lean meat yield and intramuscular rough fat content in loin. Genetic analysis was done using a multi-trait animal model. Heritabilties of the body measurements were ranged from 0.331 to 0.559 and three measurements of back fat thickness were also high as range varying from 0.402 to 0.475 for the ages of 145 and 180 days. However, eye muscle area was moderate (0.296) at the age of 180 days. Heritabilities of retail cut yields were also high as ranged from 0.387 to 0.474 and of IMF content in loin was 0.499. Heritabilities of the cut percent traits were ranged from 0.249 to 0.488. Important positive genetic and phenotypic correlations were noted for all carcass yield traits (0.298 to 0.875 and 0.432 to 0.922, respectively). IMF showed low negative genetic correlations with carcass yield traits, such as carcass weight, picnic shoulder, hind leg, loin, tenderloin and lean meat yield whereas low positive genetic correlations with back fat, belly, collar butt and spare rib. Loin, tenderloin and lean meat percent showed negative genetic correlations with carcass weight, back fat thickness, collar butt, spare rib and picnic shoulder percent. The four body measurements at the ages of 70, 145 and 180 days had positive genetic correlations with belly, shoulder butt, spare rib, picnic shoulder and hind leg percent, but negative genetic correlations were shown with loin and tenderloin percent except body measurements at 70 days. The results suggest that carcass yield are negatively correlated with intramuscular fat content, which is a major factor deciding pork quality and the yield of loin and tenderloin are not increased as much as increase in body size. However, the proportions of belly and collar butt are increased with the body size. In conclusion, selection strategy should be designed according to the preference on composition of carcass in each country.

• Korean Journal of Social Welfare
• /
• v.61 no.1
• /
• pp.195-218
• /
• 2009

The purpose of this study was to analyze the phenomenon of poverty among North Korean settlers in Korea in terms of its magnitude, the severity, and its determinants by comparing it with the South Korean poor. The data used for this analysis were the second Korean Social Welfare panel data for the South Koreans and the third longitudinal study on North Korean settlers in the South. The average household income of the North Korean settlers reached about 70% of the South Korean counterparts. The percentage of the North Korean households that earn 200% of the poverty line was about the same as the South Koreans, which indicates the improvement of the economic status of the long-term settlers in the South. However, the North Korean settlers below 100% of the poverty line were twice as much , and those under 50% of the poverty line were 8 times more than their South Korean counterparts. Despite the improved economic status of the long-term North Korean settlers in the South, those who still live below the poverty line tend to remain in poverty, which is chronic and severe. The determinants of the North Korean settlers' poverty were identified as age, number of household members in employment, alcohol problem and health satisfaction level. Policy implications were discussed in conclusion.

• Korean Journal of Plant Taxonomy
• /
• v.39 no.4
• /
• pp.254-263
• /
• 2009

The distribution and habitat characteristics of Echinosophora koreensis (Nakai) Nakai were investigated to compile basic data for conservation and restoration. The species Echinosophora koreensis is distributed within fourteen regions of the Korean Province of Gangwon, including Yanggu-gun, Inje-gun, Cheorwon-gun, Chuncheon-si and Hongcheon-gun. Natural habitats were located at altitudes of 192-626 m, with inclinations of $1-45^{\circ}$. One hundred and fifty seven vascular plant taxa were identified from 42 quadrats in 14 habitats. Dominant species among the woody plants, based on importance value, were Pinus densiflora and Quercus dentata in the tree (T1) layer, Quercus variabilis, Pinus densiflora and Quercus mongolica in subtree (T2) layer, and Fraxinus rhynchophylla, Prunus sargentii, Zanthoxylum schinifilium, and Ulmus davidiana var. japonica in the shrub (S) layer. Importance values for members of the herb layer were: Echinosophora koreensis 28.34%; Polygonatum odoratum var. pluriflorum 10.21%; Spodiopogon sibiricus 7.60%; Atractylodes ovata 4.77% and Carex lanceolata 4.13%. The importance values of the last four species were high, so they were at affinity with Echinosophora koreensis in their habitats. Average species diversity was 1.03, and evenness and dominance were found to be 0.82 and 0.16, respectively. The soil types were sandy loam and loam. Average field capacity was 13.28%, and the organic matter and soil pH were 6.70% and 5.77, respectively.

• Korean Journal of Food Science and Technology
• /
• v.47 no.2
• /
• pp.191-197
• /
• 2015

We investigated the physicochemical properties and volatile flavor compounds in Taiwan Apple Mango (TAM) and Philippines Carabao Mango (PCM). The volatile flavor compounds were extracted using solid-phase microextraction (SPME) and analyzed by GC/MS. TAM and PCM have significantly different chemical composition, except for their crude ash. The moisture and crude fat contents were higher in TAM, whereas the crude protein and carbohydrate contents were higher in PCM. The major free sugars in order of concentration were sucrose, fructose, and glucose. We identified 56 and 59 volatile flavor compounds in TAM and PCM, respectively. Terpenes and their derivatives comprised 94.42% of the volatile flavor compounds in TAM, but only 63.79% of those in PCM. The acidic compound contents were higher in PCM than in TAM. ${\delta}$-3-Carene was the dominant flavor compound in these two mango cultivars. ${\alpha}$-Copaene, ${\alpha}$-guaiene, germacrene D, ${\alpha}$-bulnesene, and ${\gamma}$-gurjunene were found only in TAM, whereas ${\beta}$-myrcene, ${\alpha}$-phellandrene, ${\beta}$-phellandrene, ${\alpha}$-terpinolene, and cis-3-hexenyl butyrate were identified in PCM. Based on the results, we suggest that these compounds might contribute to the distinguishing flavor properties in different varieties of mango.

• Convergence Security Journal
• /
• v.15 no.5
• /
• pp.29-35
• /
• 2015

The network security encryption type is divided into two, one is point-to-point, second method is link type. The level of security quality attributes are a system security quality requirements in a networked environment. Quality attributes can be observed and should be able to be measured. If the quality requirements can be presented as exact figures, quality requirements are defined specifically setting quality objectives. Functional requirements in the quality attribute is a requirement for a service function which can be obtained through the encryption. Non-functional requirements are requirements of the service quality that can be obtained through the encryption. Encryption quality evaluation system proposed in this study is to derive functional requirements and non-functional requirements 2 groups. Of the calculating measure of the evaluation index in the same category, the associated indication of the quality measure of each surface should be created. The quality matrix uses 2-factor analysis of the evaluation for the associated surface quality measurements. The quality requirements are calculated based on two different functional requirements and non-functional requirements. The results are calculated by analyzing the trend of the average value assessment. When used this way, it is possible to configure the network security encryption based on quality management.

• The Korean Journal of Air & Space Law and Policy
• /
• v.21 no.2
• /
• pp.97-121
• /
• 2006

Inter-Korean exchanges using civil aviation has been continuing since the temporary direct air route from Pyongyang to Seoul was opened on June 15th, 2000 for the summit meeting with North Korea. In this paper, I analyze the North Korea Aviation law by focusing on the differences with South Korean Aviation law. While South Korean Aviation law is modeled on the Pandect system, North Korean Aviation law can only be understood by looking at North Korea's socialist ideology. Therefore, North Korean Aviation law has some expressions which can hardly be understood. With respect to the source of aviation law, both South and North Korea are in compliance with the Convention on International Civil Aviation (Signed at Chicago, on 7 December, 1944). Thus, they established the aviation law based on the standards and recommendations provided by ICAO. For this reason, they have similar legal systems and composition. From this analysis, a few differences are also derived regarding aircraft ownership, airports, airline liability, aircraft accident investigation organization and aviation insurance. It is important to note that this paper has a particular limitation. Not only is the information about North Korean law very limited, but North Korea also does not provide easy access to its national legal codes. This paper describes the legal comparison of South and North Korea by focusing on the formation and framework of North Korean aviation law.

• Microbiology and Biotechnology Letters
• /
• v.42 no.1
• /
• pp.82-88
• /
• 2014

Atopic dermatitis (AD) is a common chronic inflammatory disease preceding the development of allergic disorders. The aim of this study was to evaluate the effect of Sargassum micracanthum ethanol extract (SMEE) on AD. AD was induced by spreading 2,4-dinitrochlorobenzen (DNCB) on the back sides of BALB/c mice. The efficacy of SMEE was tested by observing the skin clinical severity score, proliferations of Raw 264.7 cells and the secretion of cytokines and IgE. The secretion of IL-4, and IgE was significantly decreased by SMEE in a dose dependent manner, while IFN-${\gamma}$ was increased. In addition, SMEE alleviated the AD symptoms better when compared to the positive controls. In conclusion, these results suggest that SMEE has an inhibitory effect on AD, and may serve as a useful biomaterial for the development of cosmeceuticals.

• Microbiology and Biotechnology Letters
• /
• v.42 no.1
• /
• pp.18-24
• /
• 2014

This study was conducted to investigate optimum conditions for the production of cellulose-degrading crude enzymes by an isolated marine bacterium. A marine microorganism producing an extracellular cellulose-degrading enzyme was isolated from the red seaweed, Grateloupia elliptica Holmes. The isolated bacterium was identified as Cellulophaga lytica by 16S ribosomal RNA gene sequence analysis and physiological profiling and designated as Cellulophaga lytica PKA 1005. The optimum conditions for the growth of Cellulophaga lytica PKA 1005 were pH 7, 2% NaCl, and $30^{\circ}C$ with 36 h incubation time. To obtain the crude enzyme, the culture medium of the strain was centrifuged for 30 min at $12,000{\times}g$ and $4^{\circ}C$, and the supernatant was used as crude enzyme. The optimum conditions for the production of the cellulose-degrading crude enzyme were pH 8, $35^{\circ}C$, 8% carboxyl methyl cellulose, and 60 h reaction time.