• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1225_1226
• /
• 2009

유리 기판 상에 이중 게이트 절연막을 가지는 우수한 특성의 P형 엑시머 레이저 어닐링 (ELA) 다결정 실리콘 박막 트랜지스터를 제작하였다. 그리고 P형 짧은 채널 ELA 다결정 실리콘 박막 트랜지스터의 오프 상태 스트레스 하에서의 전기적 특성을 분석하였다. 스트레스하에서 긴 채널에서의 문턱 전압은 양의 방향으로 거의 이동하지 않는 (${\Delta}V_{TH}$ = 0.116V) 반면, 짧은 채널 박막 트랜지스터의 문턱 전압은 양의 방향으로 상당히 이동 (${\Delta}V_{TH}$ = 2.718V)하는 것을 확인할 수 있었다. 이런 짧은 채널 박막 트랜지스터에서 문턱 전압의 양의 이동은 다결정 실리콘 막과 게이트 산화막 사이의 계면에서의 전자 트랩핑 때문이다. 또한, 박막 트랜지스터의 누설 전류는 오프 상태 스트레스 하에서의 채널 영역의 홀 전하로 인하여 온 전류 수준을 감소시키지 않고 억제될 수 있었다. C-V 측정 결과는 계면의 전자 트랩핑이 드레인 접합 영역부근에서 발생한다는 것을 나타낸다.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.1
• /
• pp.170-177
• /
• 1996

In this paper, we propose a neural network for extracting dashed lines from map images based on the feature extracting path be found in a cat and monkey's visual cortex. The proposed system converts a color image to a binary image and extracts the lines per orientation. Next, the system removes the lines longer than the dashed line and extracts the dashed lines by finding the consecutive short lines. The proposed system for extracting the dashed lines was tested using 1/25,000 scaled maps published by the National Geographic Institute of Korea. This paper shows that the proposed system can extract the dashed-lines from maps.

• Tribology and Lubricants
• /
• v.23 no.5
• /
• pp.187-194
• /
• 2007

The profile of the roller in the axial direction is the main design factor in order to increase endurance life against the contact fatigue due to the stress concentration along the edge of the roller. Even under the elas-tohydrodynamic lubrication (ehl) conditions, the stress concentration along the edge of the roller greatly worsens the fatigue life both for the roller and contacting body. In this study, roller contacts of finite axial length are studied for the film thickness and pressure of ehl. For the real contact behaviors under the ehl conditions, multigrid and multi-level method is applied so that much higher loading conditions can be investigated. Several axial profiles of roller are investigated to verify how both ehl film and pressure are generated and some of them are recommended for the ehl contact condition.

• Journal of Sensor Science and Technology
• /
• v.8 no.4
• /
• pp.308-313
• /
• 1999

This paper will present an anisotropic etching in TMAH technique used in the fabrication of three-dimensional magnetic field vector sensor based on angled Hall plate structure. This sensor design relies on simultaneously detecting all magnetic field vector components using Hall plates that are imbedded into the silicon [111] sloped-surface of bulk micromachined cavity by the anisotropic etching of [100] silicon. The fabricated Hall elements has relatively improved sensitivity compare to convensional Hall elements for three-dimensional magnetic field sensing. The product sensitivity of 547V/AT at the supply current of 1.0mA was achived. The corresponding limit in the detection of magnrtic field is 0.07G that calculated by measured power spectral density(PSD) in magnetic sensor output.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2005.11a
• /
• pp.181-184
• /
• 2005

다양한 처리능력을 가진 단말기들은 복잡한 네트워크 환경의 호환성을 제공하기 위해서, 전송 네트워크 채널이 허용하는 범위내로 부호화된 비디오의 비트율을 적응적으로 맞춰 주어야 한다. 트랜스코더는 특정 비트율로 부호화 되어 있는 비디오를 원하는 비트율로 다시 변환하기 위해서 복호화한 후 다시 부호화의 과정을 거쳐야 하기 때문에 이에 따른 계산량의 증가와 더불어 전송시간에 문제가 발생한다. 이를 해결하기 위한 한 가지 방법으로 제안된 것이 프레임 건너뜀 기법, 즉 시간적 해상도 변환 트랜스코딩이다. 비디오를 부호화하는 과정에서 계산량을 가장 많이 차지하는 움직임 추정과정의 계산량을 줄임으로써 트랜스코딩을 수행하는데 소모되는 시간과 노력을 크게 줄이고, 건너뛰지 않고 남아있는 프레임에 더 많은 비트를 할당하여 요구되는 화질을 유지할 수 있다. 본 논문에서 움직임 벡터의 방향성을 고려하여 제안한 기법인 E-FDVS (Efficient-Forward Dominant Vector Selection)는 움직임 벡터의 방향성을 고려하여 매크로블록과 움직임 벡터의 차이를 보상하여 움직임 벡터를 재추정한다. 실험에서는 MPEG-2 영상에 대해서 제안한 방법을 적용하여 기존의 방법들에 비해서 성능이 우수함을 보인다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.18-18
• /
• 2023

하천법에 근거하여 산정하고 고시하는 하천유지유량은 하천 고유의 기능을 보호하고 보전하기 위해 하천에 남아 흘러야 하는 물로 정의할 수 있다. 하천 환경과 유량과의 관계를 완전히 이해하여 해석하는 것은 불가능하므로 몇몇 중요한 기능을 선정하여 갈수시에도 유지되도록 관리하는 것이 하천유지유량 관리의 목적이다. 대표적인 핵심 기능은 적정 수질의 보전과 수생태계의 지속가능성이며 이를 고려한 필요유량을 산정하고 모두를 만족하는 유량으로 하천유지유량을 결정하는 것이 하천유지유량 산정의 요체이다. 하천유지유량을 고시하는 것에는 사람이 하천에서 물을 취수하여 사용할 수 있는 범위를 설정한다는 핵심적인 목적이 하나 더 뒤따른다. 하천수 사용은 정해진 가용수량에서 하천유지유량을 제외한 값으로 결정되며 지금까지 하천유지유량의 정책적 방향성은 가용한 수량을 모두 취수하는 것을 방지하기 위하여 하천유지유량의 산정 대상 하천과 지점을 늘리는 양적 확대에 있었다. 이 과정에서 산정 결과가 하천에서 어떤 기능을 하고 있는지에 대한 평가가 이루어진 경우는 극히 드물었다. 본 연구에서는 우리나라 하천유지유량의 현황에 대해 살펴보고 방향성과 방법론에 대한 전망을 제시하였다. 이 과정에는 하천유지유량의 핵심 기능에 대한 실제 조사와 재평가를 통해 하천유지유량에 대한 적응관리 실행의 사례를 포함하고 있다.

• Journal of IKEEE
• /
• v.27 no.3
• /
• pp.296-302
• /
• 2023

As Multimedia industry has evolved, it has become possible to display resolutions in various formats. Therefore, the performance of a scaler algorithm that converts resolutions while maintaining high quality and its hardware implementation are important. Considering the hardware design of an image up/down scaler, this paper proposes a combinatorial scaler algorithm that uses modified bilinear interpolation in the vertical direction and bicubic interpolation in the horizontal direction to reduce the line memory burden. Through quantitative and qualitative evaluations, this paper compared the performance of the proposed algorithm with three other well-known algorithms, and also compared the hardware burden of its hardware implementation. This paper used a sinusoidal signal and eight typical images for performance evaluation.

• Composites Research
• /
• v.31 no.2
• /
• pp.43-50
• /
• 2018

The effects of deposition temperature on chemical vapor deposited silicon carbide (CVD-SiC) were studied to obtain high deposition rates and excellent bending strength characteristics. Silicon carbide prepared at $1250{\sim}1400^{\circ}C$ using methyltrichlorosilane(MTS : $CH_3SiCl_3$) by hot-wall CVD showed deposition rates of $95.7{\sim}117.2{\mu}m/hr$. The rate-limiting reaction showed the surface reaction at less than $1300^{\circ}C$, and the mass transfer dominant region at higher temperature. The activation energies calculated by Arrhenius plot were 11.26 kcal/mole and 4.47 kcal/mole, respectively. The surface morphology by the deposition temperature changed from $1250^{\circ}C$ pebble to $1300^{\circ}C$ facet structure and multi-facet structure at above $1350^{\circ}C$. The cross sectional microstructures were columnar at below $1300^{\circ}C$ and isometric at above $1350^{\circ}C$. The crystal phases were all identified as ${\beta}$-SiC, but (220) peak was observed from $1300^{\circ}C$ or higher at $1250^{\circ}C$ (111) and completely changed to (220) at $1400^{\circ}C$. The bending strength showed the maximum value at $1350^{\circ}C$ as densification increased at high temperatures and the microstructure changed from columnar to isometric. On the other hand, at $1400^{\circ}C$, the increasing of grain size and the direction of crystal growth were completely changed from (111) to (220), which is the closest packing face, so the bending strength value seems to have decreased.

• Economic and Environmental Geology
• /
• v.41 no.3
• /
• pp.299-314
• /
• 2008

The NE-trending Honam shear zone is a broad, dextral strike-slip fault zone between the southern margin of the Okcheon Belt and the Precambrian Yeongnam Massif in South Korea and is parallel to the trend of Sinian deformation that is conspicuous in Far East Asia. In this paper, we report geochemical and isotopic(Sr and Nd) data of mylonitic quartz-muscovite Precambrian gneisses and surrounding foliated hornblende-biotite granitoids near the Myeongho area in the Yecheon Shear Zone, a representative segment of the Honam Shear Zone. Foliated hornblende-biotite granitoids commonly plot in the granodiorite field($SiO_2=61.9-67.1\;wt%$ and $Na_2O+K_2O=5.21-6.99\;wt%$) on $SiO_2$ vs. $Na_2O+K_2O$ discrimination diagram, whereas quartz-muscovite Precambrian orthogneisses plot in the granite field. The foliated hornblende-biotite granitoids are mostly calcic and calc-alkalic and are dominantly magnesian in a modified alkali-lime index(MALI) and Fe# [$=FeO_{total}(FeO_{total}+MgO)$] versus $SiO_2$ diagrams, which correspond with geochemical characteristics of Cordilleran Mesozoic batholiths. The foliated hornblende-biotite granitoids have molar ratios of $Al_2O_3/(CaO+Na_2O+K_2O)$ ranging from 0.89 to 1.10 and are metaluminous to weakly peraluminous, indicating I type. In contrast, Paleoproterozoic orthogneisses have peraluminous compositions, with molar ratios of $Al_2O_3/(CaO+Na_2O+K_2O)$ ranging from 1.11 to 1.22. On trace element spider diagrams normalized to the primitive mantle, the large ion lithophile element(LILE) enrichments(Rb, Ba, Th and U) and negative Ta-Nb-P-Ti anomalies of foliated hornblende-biotite granitoids and mylonitized quartz-muscovite gneisses in the Yecheon Shear Zone are features common to subduction-related granitoids and are also found in granitoids from a crustal source derived from the arc crust of active continental margin. ${\varepsilon}_{Nd}(T)$ and initial Sr-ratio ratios of foliated hornblende-biotite granitoids with suggest the involvement of upper crust-derived melts in granitoid petrogenesis. Foliated hornblende-biotite granitoids in the study area, together with the Yeongju Batholith, show not changing contents of specific elements(Ti, P, Zr, V and Y) from shear zone to the area near the shear zone. These results suggest that no volume changes and geochemical alterations in fluid-rich foliated hornblende-biotite granitoids may occur during deformation, which mass transfer by fluid flow into the shear zone is equal to the mass transfer out of the shear zone.

• Journal of the Korean Magnetics Society
• /
• v.12 no.5
• /
• pp.184-188
• /
• 2002

The Cu/Ni/Cu(002)/Si(100) films which have perpendicular magnetic anisotropy were deposited by e-beam evaporation methods. From the reflection high energy electron diffraction pattern, the films were confirmed to be grown epitaxially on silicon. After 2X lots ions/$\textrm{cm}^2$ C+ irradiation, magnetic easy-axis was changed from surface normal to in-plane as shown in the hysteresis loop of magneto-optical Kerr effects. It became manifest from analysis of X-ray reflectivity and grazing incident X-ray diffraction that even though interface between top Cu layer and Ni layer became rougher, the contrast of Cu and Ni's electron density became manifest after ion irradiation. In addition, the strain after deposition of the films was relaxed after ion irradiation. Strain relaxation related with change of magnetic properties and mechanism of intermixed layer's formation was explained by thermo-chemical driving force due to elastic and inelastic collision of ions.