• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.508-512
• /
• 2004

An ultra-sharp tungsten electrode for field emission was manufactured by using an electrochemical etching method, and its beam characteristics were investigated. KOH and NaOH were the electrolytes used in this research, and the taper length of the tip varied form 150 $\mu\textrm{m}$ to 250 $\mu\textrm{m}$ according to the applied voltage and the concentration of the electrolyte. The electron-beam stability was measured to be within 5% for a total emission current of 5 ${\mu}\textrm{A}$ during 4 hours of operation, and the Ignition voltages were found to be ∼300 V. The tip radius was experimentally found to be 250${\AA}$ from a linear fitting of Fowler-Nordheim plots, which was in remarkably good agreement with that of the image size from scanning ion-microscopy.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.2
• /
• pp.73-79
• /
• 2000

The part-surface of mold or stamping-dies consists of a compound surface which consists of lots of composite surfaces, and may have various types of feature shapes including convex sharp edge (CSE). Those CSE features should be considered with care in machining the surface, which necessitates extraction of CSE curves on a compound surface. This work can be done rather easily for a solid model which has a complete topology information. In case of the compound surface without topology information, however, such CSE curves must be gathered through some geometrical calculations paying much computation time. In the paper, extracting CSE curves by the construction of a CSE region-map which can reduce time, and detecting various common edge types are presented.

• Korean journal of applied entomology
• /
• v.49 no.2
• /
• pp.167-169
• /
• 2010

The species, Pycnomerus vilis Sharp, 1885 (Coleoptera: Zopheridae: Zopherinae) is identified for the first time in Korea. Brief informations on the species are provided with the photos of adults and genitalia.

• Korean Journal of Computational Design and Engineering
• /
• v.6 no.2
• /
• pp.111-124
• /
• 2001

In this paper, we propose rounding operations on shell meshes, which give a constant or variable radius of rounding directly to sharp edges on a shell mesh. The rolling-ball methods for freeform surface rounding are introduced to devise the algorithms for these operations. Our algorithms consists of three steps as follows: detecting sharp edges, generating a rolling-ball surface contacting with two face groups adjacent to the sharp edges, and then replacing the rounding area of the original mesh with the mesh generated on the rolling-ball surface. In addition, this paper shows their application to the area of stamping die design. These operations enable CAE engineers to directly change the meshes of stamping tools without modification of CAD models for dies and regeneration of their meshes.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.5
• /
• pp.670-679
• /
• 1998

The solution of hyperbolic equation with wave nature has sharp discontinuties in the medium at the wave front. Difficulties encounted in the numrtical solution of such problem in clude among oth-ers numerical oscillation and the representation of sharp discontinuities with good resolution at the wave front. In this work inviscid Burgers equation and modified heat conduction equation is intro-duced as hyperboic equation. These equations are caculated by numerical methods(explicit method MacCormack method Total Variation Diminishing(TVD) method) along various Courant numbers and numerical solutions are compared with the exact analytic solution. For inviscid Burgers equa-tion TVD method remains stable and produces high resolution at sharp wave front but for modified heat Conduction equation MacCormack method is recommmanded as numerical technique.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.1039-1040
• /
• 2002

For the I-V modeling of sharp tip arrays and nanostructured planar emitters, we propose a new and much practical I-V relation including tip height and radius by considering a statistical distribution of tip radius. Frequently observed nonlinearity of Fowler-Nordheim plot for sharp tip and tip arrays was successfully simulated and then, an application example was provided to extract relevant emission-governing parameters of sharp tip.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.3
• /
• pp.199-210
• /
• 1996

The measurements of velocities of internal flow in a scaled-up nozzle were made by laser Doppler velocimetry in order to clarify the effect of internal flow on the characteristics of fuel spray. The investigated length to diameter ratio(L/d) of the orifice were 1, 3, 4, 5 and 8, and inlet radius to diameter ratio(r0/d) were 0 and 0.5. Mean and fluctuating velocities and discharge coefficients were obtained at various Reynolds number ranging between 15,000 and 28,000, and L/d ranging between 1 and 8 in sharp and round inlet nozzle. The turbulent intensity and turbulent kinetic energy at exit in a sharp inlet nozzle were higher than that in a round inlet nozzle. For sharp inlet nozzle, fluctuating velocities near exit were decreased with increasing L/d.

• The Pure and Applied Mathematics
• /
• v.21 no.2
• /
• pp.113-120
• /
• 2014

In this paper, we first show that for any space X, there is a ${\sigma}$-complete Boolean subalgebra of $\mathcal{R}$(X) and that the subspace {${\alpha}{\mid}{\alpha}$ is a fixed ${\sigma}Z(X)^{\sharp}$-ultrafilter} of the Stone-space $S(Z({\Lambda}_X)^{\sharp})$ is the minimal basically disconnected cover of X. Using this, we will show that for any countably locally weakly Lindel$\ddot{o}$f space X, the set {$M{\mid}M$ is a ${\sigma}$-complete Boolean subalgebra of $\mathcal{R}$(X) containing $Z(X)^{\sharp}$ and $s_M^{-1}(X)$ is basically disconnected}, when partially ordered by inclusion, becomes a complete lattice.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.2
• /
• pp.103-111
• /
• 2006

To optimize the ventilation and smoke control systems in subway equipped with platform screen door, the technology to analyze the unsteady tunnel flow caused by running of train should be developed. The development of model experiment and numerical analysis technique with relation to unsteady flow of subway were presented. The pressure and air velocity changes in 1/20-scaling experiment unit were measured and results were comparied to those of 3-D unsteady numerical analysis applied with sharp interface method. The experimental and numerical results were quantitatively similar and it would be reasonable to apply sharp interface method to analyze the unsteady flow in subway equipped with platform screen door.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.1
• /
• pp.33-42
• /
• 2010

In this study, new medial surface calculation methods using Voronoi diagrams are investigated for the point samples extracted on closed surface models. The medial surface is defined by the closure of all points having more than one closest point on the shape boundary. It is a one of essential geometric information in 3D and can be used in many areas such as 3D shape analysis, dimension reduction, freeform shape deformation, image processing, computer vision, FEM analysis, etc. In industrial parts, the idealized solid parts and shell shapes including sharp edges and vertices are frequently used. Other medial surface extraction methods using Voronoi diagram have inherent separation and branch problems, so that they are not appropriate to the sharp edged objects and have difficulties to be applied to industrial parts. In addition, the branched surfaces on sharp edges in shell shapes should be eliminated to obtain representative medial shapes. In order to avoid separation and branch problems, the new approach by analyzing the shapes and specially sampling on surfaces has been developed.