• 제목/요약/키워드: SGS

검색결과 199건 처리시간 0.028초

큰 받음각을 갖는 세장형 물체 주위의 점성 유동장 수치 모사 (Numerical Simulation of Flow Around a Slender Body at High Angle of Attack)

  • 노오현;황수정
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 1995년도 추계 학술대회논문집
    • /
    • pp.3-10
    • /
    • 1995
  • The compressible laminar and turbulent viscous flow on a slender body in supersonic speed as well as subsonic speed has been numerically simulated at high angle of attack. The steady and time-accurate compressible thin-layer Navier-Stokes code based on an implicit upwind-biased LU-SGS algorithm has been developed and specifically applied at angles of attack of 20, 30, 40 deg, respectively. The modified eddy-viscosity turbulence model suggested by Degani and Schiff was used to simulate the case of turbulent flow. Any geometric asymmetry and numerical perturbation have not been intentionally or artificially imposed in the process of computation. The purely numerical results for laminar and turbulent cases, however, show clear asymmetric formation of vortices which were observed experimentally. Contrary to the subsonic results, the supersonic case shows the symmetric formation of vortices as indicated by the earlier experiments.

  • PDF

2-방정식 및 레이놀즈 응력 모형을 이용한 초음속 난류 기저유동의 수치적 계산 (Computation of supersonic turbulent base flow using two-equation and Reynolds stress models)

  • 김민환;박승오
    • 한국전산유체공학회지
    • /
    • 제2권2호
    • /
    • pp.9-17
    • /
    • 1997
  • The performance of several turbulence models in computing an axisymmetric supersonic base flow is investigated. A compressible Navier-Stokes code, which incorporates k-ε, k-ω model and Reynolds stress closure with three kinds of pressure-strain correlation model, has been developed using implicit LU-SGS algorithm with second-order upwind TVD scheme. Numerical computations have been carried out for Herrin and Dutton's base flow. It is observed that the two-equation models give large backward axial velocity approaching to the base and somewhat larger variation of base pressure distribution than the Reynolds stress model. It is also found that the Reynolds stress model with third order pressure-strain model in the anisotropy tensor predicts most accurate mean flow field.

  • PDF

겹침격자 기법을 이용한 틸트로터의 순항모드에 대한 공력성능 수치해석 (Numerical Analysis of Aerodynamic Performance for Tilt Rotor Aircraft in Cruise Mode Using Chimaera Grid Method)

  • 고성호;안성원;김병수
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2004년도 추계 학술대회논문집
    • /
    • pp.87-90
    • /
    • 2004
  • A numerical analysis was made for the unsteady flow fields of rotor system of a Tilt-Rotor aircraft in cruise mode. The Reynolds-averaged thin-layer Navier-Stokes equations were discretized by Roe's upwind differencing scheme and integrated in time by the LU-SGS algorithm. The computational domain of the rotor system was constructed by six multi-block Chimera grids. Simulated unsteady flow fields of rotating blades were studied in several different view points.

  • PDF

AHP기법 적용을 통한 수산양식장 평가방식 개선에 관한 연구 (A Study on the Improvement of the Aquaculture Evaluation Method by using AHP)

  • 서종석;서원철;옥영석
    • 수산해양교육연구
    • /
    • 제26권4호
    • /
    • pp.846-858
    • /
    • 2014
  • The purpose of this study is to help domestic aquaculture farm by improved evaluation method. First, We analyzed evaluation method of domestic aquaculture certification, the greater retailer's supplier and global standard. Next, By using Analytic Hierarchy Process (AHP), We found priority and importance between criteria of SQF(Safety Quality Food) standard which is appled to alternative model for aquaculture evaluation. As a result is presented as follows: regarding pairwise comparison between System Element module and Good Aquaculture Practice(GAP) module, GAP is recognized to be more important than System Element. The highest priority criteria is presented 'Purchase and Use of Medications, Aquaculture Feeds and Aquaculture Chemicals.' Next, 'Management commitment', 'Attaining Food Safety', 'Location and Layout of Structures and Vessels', 'Stock Identification and Traceability are recognized high position. This study has major implications for research into development of evaluation method.

혼합격자를 이용한 2차원 난류 유동장 해석 프로그램의 병렬화 (Parallelization of a Two-Dimensional Navier-Stokes Solver Using Hybrid Meshes)

  • 옥호남;박승오
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 1999년도 추계 학술대회논문집
    • /
    • pp.115-126
    • /
    • 1999
  • A two-dimensional Navier-Stokes solver using hybrid meshes is parallelized with a domain decompostion method. The focus of this paper is placed on minimizing the amount of effort in parallelizing the serial version of the solver, and this is achieved by adding an additional layer of cells to each decomposed domain. Most subroutines of the serial solver are used without modification, and the information exchange between neighboring domains is achieved using MPI(Message Passing Interface) library. Load balancing among the processors and scheduling of the message passing are implemented to reduce the overhead of parallelization, and the speed-up achieved by parallelization is measured on the transonic invisicd and turbulent flow problems. The parallelization efficiencies of the explicit Runge-Kutta scheme and the implicit point-SGS scheme are compared and the effects of various factors on the results are also studied.

  • PDF

열적, 화학적 비평형 유동해석에서 내재적 시간 적분법의 비교 (Comparison of Implicit Time Integration Schemes for the Analysis of Thermal and Chemical Non-equilibrium Flow)

  • 이창호;박승오
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 1999년도 추계 학술대회논문집
    • /
    • pp.42-47
    • /
    • 1999
  • In this study, we adopt the point symmetric Gauss-Seidel relaxation algorithm to obtain the steady state solution of the Navier-Stokes equations for the thermal and chemical nonequilibrium flow of air. All of the inviscid, viscous flux Jacobians and thermochemical source Jacobians are included in the implicit part Numerical simulation is performed for the thermal and chemical nonequilibrium flow over blunt body and computational results are presented. The convergence history and CPU time of the present computation are compared with the LU-SGS scheme which employs the approximate Jacobians.

  • PDF

CFDS 코드의 효율성 개선 (Efficiency Enhancement of CFDS Code)

  • 김재관;이정일;김종암;홍승규;이황섭;안창수
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2005년도 춘계 학술대회논문집
    • /
    • pp.123-127
    • /
    • 2005
  • The numerical analyses of the complicated flows are widely attempted in these days. Because of the enormous demanding memory and calculation time, parallel processing is used for these problems. In order to obtain calculation efficiency, it is important to choose proper domain decomposition technique and numerical algorithm. In this research we enhanced the efficiency of the CFDS code developed by ADD, using parallel computation and newly developed numerical algorithms. For the huge amount of data transfer between blocks non-blocking method is used, and newly developed data transfer algorithm is used for non-aligned block interface. Recently developed RoeM scheme is adpoted as a spatial difference method, and AF-ADI and LU-SGS methods are used as a time integration method to enhance the convergence of the code. Analyses of the flows around the ONERA M6 wing and the high angle of attack missile configuration are performed to show the efficiency improvement.

  • PDF

순항중인 틸트로터의 회전하는 블레이드에 대한 공력성능 수치해석 (Numerical Analysis of Aerodynamic Performance for Rotating Blades of Tilt Rotor Aircraft in Cruise Mode)

  • 안성원;고성호;김병수;최성욱
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2005년도 춘계 학술대회논문집
    • /
    • pp.21-24
    • /
    • 2005
  • Numerical analysis were made for the unsteady flow fields of the rotor system of a Tilt-Rotor aircraft in cruise mode. The Reynolds-averaged thin-layer Wavier-Stokes equations were discretized by Roe's upwind differencing scheme and integrated in time by the LU-SGS algorithm. The computational domain of the rotor system was constructed by seven multi-block Chimera grids. Comparison of pressure coefficient on the surface of the main wing and blades were made for 3cases of advance ratio(0.325, 0.350, 0.375) and thrust and power coefficients for the rotor were compared with experimental data.

  • PDF

3차원 외재적 필터링 을 이용한 SGS 모델 (A Subgrid scale model with a 3 -dimensional explicit filtering)

  • 이경세;백제현
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2008년도 춘계학술대회논문집
    • /
    • pp.634-637
    • /
    • 2008
  • A large eddy simulation with an explicit filter on unstructured mesh is presented. The flow filed is semi-implicitly marched by a fractional step method. Spatial discretization of the solver is designed to guarantee the second order accuracy. An isotropic explicit filter is adopted for measuring the level of subgrid scale velocity fluctuation. The filter is linearity-preserving and has second order commutation error. The developed subgrid scale model is basically eddy viscosity model which depends on the explicitly filtered fields and needs no additional ad hoc wall treatment, such as van Driest damping function. For the validation, the flows in a channel and a pipe are calculated and compared to experimental data and numerical results in the literature.

  • PDF

예조건화 압축성 알고리듬을 이용한 층류 분무연소장 해석 (The Application of Preconditioning in Laminar Spray Combustion Analysis)

  • 황용석;윤웅섭
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 1998년도 춘계 학술대회논문집
    • /
    • pp.128-137
    • /
    • 1998
  • In this numerical experiment, the preconditioned compressible Navier-Stokes equation is tested to analyze the laminar spray combustion. Sprayed flow field is formulated by Eulerian-Lagrangian system for the gas and liquid phases each. DSF(Deterministic Separated Flow) model was adopted for the sprays with the vortex model to describe transients of individual droplet heating. Simplified single global reaction model approximates methanol-air reaction with and without disk flame holder. The equation system is discretized by finite difference technique and time integrated by LU-SGS. Due to greatly simplified chemical reaction mechanism and the lack of experimental evidences, most of the efforts were devoted to show the applicability and robustness of preconditioned compressible flow calculation algorithm. Computation results in qualitatively reasonable combusting flow field, hence it is believed that further refinement are required to produce quantitatively accurate solutions.

  • PDF