• The Journal of the Korea Contents Association
• /
• v.14 no.4
• /
• pp.110-122
• /
• 2014

Korea's film industry has been growing over the last 10 years, and there has been much attention to the antecedents of film box office sales both academic and business communities. So far, previous research which explained success factors of film or movie mainly focused on 3 stages, production, distribution and screening. However, these 3 steps are heavily vertically integrated in Korea's firm industry unlike United States. Almost 130% of movie theaters are multiplex chain and operated by film production companies such as CJ and Lotte Entertainment In this situation, film sales are likely to he affected by movie theaters own facilities or location factors rather than movie contents. Based. on resource-based view and S-C-P paradigm, the authors examined "whether movie theater's facilities factors and trade area factors such as accessibility, competitive situation, and population have effect to movie theater's sales revenues. The results showed that the average occupancy of theater is the most important factor to movie theaters sales in both large and small cities. In large cities, movie theater's facilities factors which included vibration seat special sound system, premium movie theater, VIP lounge are relatively important than trade area factors. In contrast, in small cities, location factors and accessibility are the most important factors to movie theaters sales. We discuss the managerial and theoretical implication for the results and the specific limitations are suggested at the end of the paper.

• Polymer(Korea)
• /
• v.36 no.6
• /
• pp.705-711
• /
• 2012

In this study, the elastic liposome consisted of egg phospholipids and edge activator ($Tego^{(R)}$ care 450) was prepared in order to supplement the defect of the conventional liposome. We prepared elastic liposome containing quercetin, known as natural antioxidant, and evaluated the vesicles size, elasticity, loading efficiency, stability, and in vitro skin permeation. The mean diameter of quercetin loaded elastic liposome formulations ranged between 208.2~303.4 nm and loading efficiency was observed 64.1~87.5%. The highest loading efficiency (87.5%) and deformability (28.3) were observed at the optimal ratio of 90 : 10 (egg phospholipids : $Tego^{(R)}$ care 450) among 0.1% quercetin loaded elastic liposome formulations. The elastic liposome formulation was selected for further transdermal permeation study. The elastic liposome ($129.9{\mu}g/cm^2$) exhibited more skin permeability than general liposome ($114.8{\mu}g/cm^2$) and 1,3-butylene glycol ($75.1{\mu}g/cm^2$) solution. This results suggest that the elastic liposome formulation using $Tego^{(R)}$ care 450 as a major edge activator could be useful for the delivery of active ingredient through the skin transdermal.

• The Journal of Industrial Distribution & Business
• /
• v.11 no.2
• /
• pp.41-48
• /
• 2020

Purpose: This study is to examine the intention of the elderly who live alone in the customized AI speaker for the elderly living alone to improve the quality of life service for the elderly living alone in the smart city environment. Based on the quality of life model of the elderly, this study is applied to the technology acceptance model to investigate the relationship between perceived usefulness and ease of use on the sustained use intention. Research design, data and methodology: Residents in Suwon, Gyeonggi-do, selected as candidate local governments for the Smart City Challenge Project of the Ministry of Land, Infrastructure and Transport in June 2019 to measure the perceived technology acceptance of potential users for the AI technology for the elderly living alone as part of the smart city technology. In order to evaluate the intention of using AI speaker, which is the target system of this study, a video of a chatbot using experience of elderly people living alone was produced. Results: First of all, in order for the elderly living alone to have an attitude to use AI-based speakers, there should be a perceived usefulness of the quality of life of the elderly. However, ease of use did not show any significant causal relationship to attitude toward use. In addition, the attitude toward use weakly influenced the intention to use. In other words, elderly people living alone were not likely to have a significant effect on their attitude toward use. However, feeling that AI speakers are easy to use will help to improve the quality of life, which in turn led to the attitude toward using AI speakers, which could lead to indirect effects. Finally, the perceived usefulness of quality of life was found to have a weak effect on direct use intentions. Conclusions: This study conducted a study on the technology acceptance of service environment to improve the quality of life for the specific user group who live alone in the smart seat environment. In this study, we examined the effects of AI speaker on the elderly living alone to improve the quality of life for the elderly living alone.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.6
• /
• pp.443-453
• /
• 2020

This study using the active vibration control technique attempts to alleviate numerically the airframe vibration of a UH-60A helicopter. The AVCS(Active Vibration Control System) is applied to reduce the 4/rev vibration responses at the specified locations of the UH-60A airframe. The 4/rev hub vibratory loads of the UH-60A rotor is predicted using the nonlinear flexible dynamics analysis code, DYMORE II. Various tools such as NDARC, MSC.NASTRAN, and MATLAB Simulink are used for the AVCS simulation with five CRFGs and seven accelerometers. At a flight speed of 158knots, the predicted 4/rev hub vibratory loads of UH-60A rotor excite the airframe, and then the 4/rev vibration responses at the specified airframe positions such as the pilot seat, rotor-fuselage joint, mid-cabin, and aft-cabin are calculated without and with AVCS. The 4/rev vibration responses at all the locations and directions are reduced by from 25.14 to 96.05% when AVCS is used, as compared to the baseline results without AVCS.

• Journal of Digital Convergence
• /
• v.12 no.1
• /
• pp.295-303
• /
• 2014

This exploratory study deals with the digital policy proposal through emotional perception of real name SNS and WOM effect. Research was based on the audience trends analysis of the movies having official SNS sites and the movies not having official SNS sites among the opened 90 movies in Korea from 2012 to 2013. Therefore, researchers confirmed that the representative real SNS, facebook was utilized as emotional marketing tools and tried to analyze the effectiveness of SNS critically. The research results are the follows. First, the movies to actively utilize facebook showed statistically significant differences in terms of daily, weekly audience and seat share (occupancy ratio). It is indirectly confirmed that real name SNS such as facebook is much effective in WOM marketing. Second, in the daily trends and weekly trends, the movies showed a similar pattern and above all, the movies to actively take advantage of facebook maintained their audience trends. Thus the government and the corporation have to understand the emotional WOM effect of real name SNS for policy effectiveness. Therefore this study gives the contribution practically for boost up the policy effectiveness through emotional ripple WOM effect of the strength of weak tie of real name SNS.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.9
• /
• pp.418-424
• /
• 2017

Magnesium has a higher specific strength than other metals and is widely used industry wide due to its excellent vibration absorption ability and electromagnetic wave shielding property.For example, it is used for automobile parts such as car seat frames and cylinder heads, and is widely used in electronic products such as notebook cases and mobile phone cases. In addition, it is in the spotlight as a bone-implant material used to assist in the treatment of damaged bones when the bones are cracked or broken. Currently, Ti alloy, stainless steel and Co-Cr-Mo alloy are used as the implant material, and the Mg alloy remains in research stage. The current problem with bone implant implants is that the patients must undergo reoperation to remove the implants after joint surgery. Magnesium, however, can achieve sufficient strength compared to current materials. In addition, since it is self-decomposed after the recovery, reoperation is not necessary. In this paper, Mg alloys were designed by adding harmless Ca and Zn to the human body. In order to improve the strength and corrosion resistance, the final alloy was designed by adding a small amount of Sr as a grain refiner. The radioactive elements of Sr are harmful to the human body, but other naturally occurring Sr elements are harmless. Microstructure analysis of the alloys was performed by optical microscopy and scanning electron microscopy. The mechanical properties and corrosion characteristics were evaluated by tensile test, potentiodynamic test and immersion test.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.10 no.4
• /
• pp.287-294
• /
• 2016

Based on upper limb torque by different angles of a back, distance between crank axis and chest and angles of hand-grips, this research is to develop variable hand bikes. By doing so, it is to offer guidance for its design. For this research three normal persons took part in the experiment. Results are as follows. First, upper limb torque was found to be the highest at 50 degree of a back and muscle endurance was shown to be the highest at 80 degree of a back. It means that as a back of a chair gets lower the speed and efficiency becomes better, which contradicts the subjective fact that K-type hand bikes would show the highest speed. Second, among types of grips of hand bikes 45 degree ones have been shown to be the ones with the highest torque. This is due to proper distribution of power of joints in arms, elbows, and shoulders. Third, in case of distance of 45cm between crank axis and chest, it has shown the most efficient torque. This is because of the effect of gravity and exhaustion when handling.

• Journal of architectural history
• /
• v.14 no.3 s.43
• /
• pp.129-148
• /
• 2005

The plan type of Korean protestant church architecture underwent changes as following five stages according to the changes of the distinction between the sexes. First stage - At the beginning of missionary work in Korea, Koreans generally worshiped in missionary houses which were traditional Korean styles. The plan type of these houses was a simple '-' figure. At that time, men and women worshiped separately because of the idea of the distinction between the sexes. They either worshiped in different places at the same time or in the same place at the different time. Second stage - At this stage, men and women started to worship together in the same place. At the beginning of this stage, men sat in the front of the chapel on a rostrum, and women sat behind the men. The plan type of the chapel was a simple '-' or a rectangular figure. Later, they sat separately on the right and left side. There are the visual interceptions which were set up between them. As the number of church members increased rapidly, a new type of church architecture appeared. It was a 'ㄱ' figure. At that time the entrances were separated by the sexes. Third stage - At this stage, the visual interceptions disappeared as the idea of the distinction between the sexes became weak. As new churches had been constructed by the plan type of rectangular figure, the visual interceptions weren't set up anymore. Fourth stage - At this stage, the separated entrances were unified as one. But the arrangement of their seats didn't change because of the old idea of the distinction between the sexes. Fifth stage - In the final stage, the plan type of the church architecture was not determined by the idea of the distinction between the sexes but social, economical, technological facts and the influence of the foreign architecture. At this stage, new and various kinds of the plan type appeared such as the fan, round, squared, or oval figure as well as the rectangular figure. Men and women were not classified anymore. They started to sit and worship together in the same place. Also, when men and women sat separately from side to side because of the Idea of the distinction between the sexes, men sat on the right and women sat on the left side of rostrum. It didn't applied Confucian ideas but the idea of protestant church; protestant churches have the idea that the right side is more important but it does not in Confucianism.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.4
• /
• pp.503-518
• /
• 2003

Statement of problem : There have been previous studies about considerable variations in machining accuracy and consistency in the implant-abutment-screw interfaces. Purpose : The purpose of this study was to evaluate the machining accuracy and consistency of implant/abutment/screw combinations on two randomly selected implants from each of four manufactures. Material and methods : In this study, screws were respectively used to secure a cemented abutment, to a hexlock implant fixture ; teflon coated titanium alloy screw(Torq-Tite) and titanium alloy screw in Steri--Oss system, gold-plated gold-palladium alloy screw(Gold-Tite) and titanium alloy screw in 3i system gild screw ana titanium screw in AVANA Dental Implant system, and titanium screws in Paragon System. The implants were perpendicularly mounted in polymethyl methacrylate autopolymerizing acrylic resin block(Orthodontic resin, Densply International Inc. USA) by use of dental surveyer. Each abutment screw was secured to the implant with recommended torque value using a digital torque controller. Each screw was again tightened after 10 minutes. All samples were cross sectioned with grinder-polisher unit(Omnilap 2000 SBT Inc) after embeded in liquid unsaturated polyester (Epovia, Cray Valley Inc) Results : There were the largest gaps in the neck areas of screws in hexagonal extension implants which were examined in this study. The leading edge of the abutment screw thread (superior surface) was in contact with the implant body thread, and the majority of the contacting surfaces were localized to the middle portion of the mating threads. Considerable variation in the contacting surfaces was noted in the samples evaluated. Amounts of contact in the abutment screw thread were larger for assemblies with Gold-Tite screw, gold alloy screw. Torq-Tite screw than those with titanium screws. The findings of intimate contact between the screw and screw seat were seen in all samples, regardless of manufacturers. However, microgap between the head and lateral neck surface of the screw and the abutment could be dectected in all samples. The findings of intimate contact between the platform of the implant and the bottom of the abutment were consistent in all samples, regardless of manufacturers. However, microgaps between the lateral surface of external hex of the fixture and the abutment could be dectected in all samples. Conclusion : Considerable variations in machining accuracy and consistency were noted in the samples and the implant-abutment-screw interfaces were incomplete. From the results of this study, further development of the system will be required, including improvements in pattern design.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.2
• /
• pp.192-209
• /
• 2004

Purpose : The purpose of this study was to evaluate the machining accuracy and consistency of implant/abutment/screw combination or internal connection type. Material and methods: In this study, each two randomly selected internal implant fixtures from ITI, 3i, Avana, Bicon, Friadent, Astra, and Paragon system were used. Each abutment was connected to the implant with 32Ncm torque value using a digital torque controller or tapping. All samples were cross-sectioned with grinder-polisher unit (Omnilap 2000 SBT Inc) after embeded in liquid unsaturated polyester (Epovia, Cray Valley Inc). Then optical microscopic and scanning electron microscopic(SEM) evaluations of the implant-abutment interfaces were conducted to assess quality of fit between the mating components. Results : 1) Generally, the geometry of the internal connection system provided for a precision fit of the implant/abutment into interface. 2) The most precision fit of the implant/abutment interface was provided in the case of Bicon System which has not screw. 3) The fit of the implant/abutment interface was usually good in the case of ITI, 3I and Avana system and the amount of fit of the implant/abutment interface was similar to each other. 4) The fit of the implant/abutment interface was usually good in the case of Friadent, Astra and Paragon system. The case of Astra system with the inclined contacting surface had the most Intimate contact among them. 5) Amount of intimate contact in the abutment screw thread to the mating fixture was larger in assembly with two-piece type which is separated screw from abutment such as Friadent, Astra and Paragon system than in that with one-piece type which is not seperated screw from abutment such as ITI, 3I and Avana system. 6) Amount of contact in the screw and the screw seat of abutment was larger in assembly of Friadent system than in asembly of Astra system of Paragon system. Conclusion: Although a little variation in machining accuracy and consistency was noted in the samples, important features of all internal connection systems were the deep, internal implant-abutment connections which provides intimate contact with the implant walls to resist micro-movement, resulting in a strong stable interface. From the results of this study, further research of the stress distribution according to the design of internal connection system will be required.