• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.7 no.3
• /
• pp.30-39
• /
• 2011

URANUS (Ubiquitous, Robust, Accident-forgiving, Non-proliferating, Ultra-lasting and Sustainer) has been developed with 35MWe (100MWth) operating without primary coolant pump, capitalizing on natural circulation capability of lead-bismuth eutectic (LBE) for long-life small and robust power units. To ensure the structural integrity, the large safety margin against Safe Shutdown Earthquake, 0.3g, and furthermore the cost effectiveness for URANUS, three-dimensional seismic base isolation design has been developed. The analytical model has been developed and seismic time history analyses have been carried out. The advantage for using three-dimensional seismic base isolation for URANUS has been discussed.

• Food Science and Preservation
• /
• v.17 no.5
• /
• pp.688-697
• /
• 2010

We investigated the cholesterol-lowering and body-weight loss effects of Cheonggukjang fermented using Bacillus subtilis DJI in rats fed a high-fat/high-cholesterol diet for 4 weeks. Weight-matched male Sprague-Dawley rats were assigned to one of four groups: a normal diet group (N), a high-fat/high-cholesterol diet group (HFC), a high-fat/high-cholesterol diet with DJI Cheonggukjang group (HFC-SCK), and a high-fat/high-cholesterol with commercial Cheonggukjang group (HFC-CCK). All of body weight and liver and adipose tissue weights increased in animals fed a high-fat/high-cholesterol diet, but decreased significantly in rats fed Cheonggukjang powder, compared with the HFC group. Food intake was lower in the HFC group than in the N group, and that of the HFC-CCK group was the lowest among the four groups. Serum total cholesterol levels were significantly lower in the Cheonggukjang-powder fed groups than the other groups. Serum phospholipid and HDL-cholesterol concentrations were significantly decreased in HFC animals and were markedly increased upon feeding of a Cheonggukjang-containing-diet. Levels of serum LDL-cholesterol, the atherogenic index, and cardiac risk factor assessment indications tended to be decreased in Cheonggukjang powder-fed groups, compared with the HFC group. The total cholesterol level in liver tissue was increased by feeding of a high-fat/high-cholesterol diet, and was significantly reduced when Cheonggukjang powder was present in the diet. The levels of total lipids and triglycerides in adipose tissues were lower in the HFC-SCK group than in the HFC group, whereas no significant differences were evidence when the HFC and the HFC-CCK groups were compared. Fecal weight, moisture level, and total lipid content increased in animals fed Cheonggukjang powder. The activities of HR-LPL and TE-LPL in adipose tissues were increased in the HFC group compared with the Cheonggukjang powder-fed groups. These results indicate that dietary Cheonggukjang may improve lipid metabolism and prevent obesity and hyperlipidemia.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.3
• /
• pp.191-196
• /
• 2005

Fusarium head blight (FHB) is a severe disease problem that affects the quality and yield of barley grain. The evaluation of FHB resistance is difficult because environmental conditions greatly influence FHB infection and development. The objectives of this study were to: 1) establish an efficient screening method for selecting resistant barley to FHB, 2) compare FHB severity between the cut-spike method and pot-plant method for development of mass screening, and 3) estimate FHB resistance for barley germplasms. Barley cultivars and lines were evaluated for reaction to FHB in controlled-greenhouse condition. Spikes were spray-inoculated with a suspension $(5.0\times10^5\;macroconidia\;mL^{-1})$ of Fusarium graminearum SCK-O4 strain, and then kept in a greenhouse at $18-25^{\circ}C$ with $80-100\%$ relative humidity. Inoculation were employed at 3 different heading growth stages (heading date, three days after heading, and five days after heading). The inoculation was performed in 2 consecutive days in order to avoid escapes. The inoculated plants were maintained in the greenhouse at 4 different free moisture periods (1, 3, 5, and 7 days). The percentage of FHB severity was scored from 0 to 9 according to the rate of infected kernels per spike, and three spikes were evaluated per replication with 3 replicates. There were significant differences of FHB severity depending on the different free moisture periods, but not by the inoculation at different heading stages. The optimum evaluation point of FHB severity in the greenhouse condition was on the 7th day under free moisture condition after inoculation at the heading date. Infection level in cut-spike method highly correlated with that in pot-plant method. This suggested that cut-spike method is useful in evaluating of FHB resistance in barley. Six cultivars, such as Jinkwang, Buheung, Atahualpha 92, Chevron-b, Gobernadora-d, and MNBrite-c, were selected as resistant varieties to FHB. Correlation coefficient for the FHB severity evaluated by the pot-plant method between two seasons was 0.794, indicating the stability and accuracy of the screening method.

• Nuclear Engineering and Technology
• /
• v.53 no.10
• /
• pp.3367-3378
• /
• 2021

The design phase and safety assessment of Generation IV liquid metal-cooled fast reactors calls for the improvement of fuel pin performance codes, in particular the enhancement of their predictive capabilities towards uranium-plutonium mixed oxide fuels and stainless-steel cladding under irradiation in fast reactor environments. To this end, the current capabilities of fuel performance codes must be critically assessed against experimental data from available irradiation experiments. This work is devoted to the assessment of three European fuel performance codes, namely GERMINAL, MACROS and TRANSURANUS, against the irradiation of two fuel pins selected from the SUPERFACT-1 experimental campaign. The pins are characterized by a low enrichment (~ 2 wt.%) of minor actinides (neptunium and americium) in the fuel, and by plutonium content and cladding material in line with design choices envisaged for liquid metal-cooled Generation IV reactor fuels. The predictions of the codes are compared to several experimental measurements, allowing the identification of the current code capabilities in predicting fuel restructuring, cladding deformation, redistribution of actinides and volatile fission products. The integral assessment against experimental data is complemented by a code-to-code benchmark focused on the evolution of quantities of engineering interest over time. The benchmark analysis points out the differences in the code predictions of fuel central temperature, fuel-cladding gap width, cladding outer radius, pin internal pressure and fission gas release and suggests potential modelling development paths towards an improved description of the fuel pin behaviour in fast reactor irradiation conditions.

• Nuclear Engineering and Technology
• /
• v.46 no.2
• /
• pp.125-146
• /
• 2014

This review aims to provide a synthesis of the knowledge generated and the lessons learned in roughly 15 years of UMo dispersion fuel R&D in Europe through a series of irradiation experiments. A lot of irradiations were also performed outside of Europe, particularly in the USA, Russia, Canada, Korea and Argentina. In addition, a large number of out-of-pile investigations were done throughout the world, providing support to the understanding of the phenomena governing the UMo behaviour in pile. However, the focus of this article will be on the irradiations and Post-Irradiation Examination (PIE) results obtained in European experiments. The introduction of the article provides a historic overview of the evolution and progress in the high density UMo dispersion fuel development. The ensuing sections then provide further details on the various phases of the development, from the UMo dispersion in a pure Al matrix through the addition of Si to the matrix to address the interaction layer formation and finally to the more advanced solutions to the excessive swelling encountered in various experiments. This review was based only on published results or results that are currently in the process of being published.

• East Asian mathematical journal
• /
• v.39 no.2
• /
• pp.141-166
• /
• 2023

The purpose of this study is to confirm the MKT(Mathematical Knowledge for Teaching) of the in-service mathematics teachers on the statistics(Representative value, Degree of scattering) through the comparative analysis between the sub-elements of the MKT. In addition, it is to examine the factors that cause the difference of the subjects' MKT. To accomplish this, by the subject of 12 secondary in-service mathematics teachers, in this study the test items of the MKT on the statistics were developed and data were collected and analyzed. As a result of the analysis of the MKT test sheet, the CCK(Common Content Knowledge) and SCK(Specialized Content Knowledge) of the mathematics teacher was confirmed as a high score, whereas the and KCS(Knowledge of Content and Students) and KCT(Knowldge of Curriculum and teaching) were confirmed as low scores. In addition, through these results, it was shown that the difference in MKT's elements the middle school and high school teachers obtain occurred slightly.

• Journal of the Korean School Mathematics Society
• /
• v.23 no.4
• /
• pp.427-448
• /
• 2020

The purpose of this study is to confirm the MKT(Mathematical Knowledge for Teaching) of the pre-service mathematics teachers on the normal distribution through the comparative analysis between the sub-elements of the MKT. In addition, it is to examine the factors that cause the difference of the subjects' MKT. To accomplish this, by the subject of 24 secondary pre-service mathematics teachers, in this study the test items of the MKT on the normal distribution were developed and data were collected and analyzed. As a result of the analysis of the MKT test sheet, the CCK(Common Content Knowledge) of the preparatory mathematics teacher was confirmed as a high score, whereas the SCK(Specialized Content Knowledge) and KCS(Knowledge of Content and Students) were confirmed as low scores. In addition, through these results, it could be confirmed that the difference in MKT of preparatory mathematicians occurred.

• Genomics & Informatics
• /
• v.19 no.4
• /
• pp.39.1-39.8
• /
• 2021

Tamoxifen (TAM) is an anticancer drug used to treat estrogen receptor (ER)-positive breast cancer. However, its ER-independent cytotoxic and antifungal activities have prompted debates on its mechanism of action. To achieve a better understanding of the ER-independent antifungal action mechanisms of TAM, we systematically identified TAM-sensitive genes through microarray screening of the heterozygous gene deletion library in fission yeast (Schizosaccharomyces pombe). Secondary confirmation was followed by a spotting assay, finally yielding 13 TAM-sensitive genes under the drug-induced haploinsufficient condition. For these 13 TAM-sensitive genes, we conducted a comparative analysis of their Gene Ontology (GO) 'biological process' terms identified from other genome-wide screenings of the budding yeast deletion library and the MCF7 breast cancer cell line. Several TAM-sensitive genes overlapped between the yeast strains and MCF7 in GO terms including 'cell cycle' (cdc2, rik1, pas1, and leo1), 'signaling' (sck2, oga1, and cki3), and 'vesicle-mediated transport' (SPCC126.08c, vps54, sec72, and tvp15), suggesting their roles in the ER-independent cytotoxic effects of TAM. We recently reported that the cki3 gene with the 'signaling' GO term was related to the ER-independent antifungal action mechanisms of TAM in yeast. In this study, we report that haploinsufficiency of the essential vps54 gene, which encodes the GARP complex subunit, significantly aggravated TAM sensitivity and led to an enlarged vesicle structure in comparison with the SP286 control strain. These results strongly suggest that the vesicle-mediated transport process might be another action mechanism of the ER-independent antifungal or cytotoxic effects of TAM.