• Magazine of the Korean Society of Agricultural Engineers
• /
• v.31 no.4
• /
• pp.96-110
• /
• 1989

To suggest the fundamental data for the estimation of crop evaportranspiration by the ca- lculated coefficients for estimating the radiation suitable to the different regions of korea in application of Penman equcation, the daily data such as sc(skycover), n(actual sunshine hours), N(possible sunshine hours), Rs(horizontal solar radiation) and Ra(extraterrestial solar radiation) for 10 years (from 1977 to 1986) collected from 19 meteorological stations were analysed. The results are summarized as follows : 1. The coefficients a, b and c for estimating the radiation taken by the regression method with the daily and monthly mean data of the skycover and the ratio of Rs to Ra were shown as a=0.619, b= -0.0202, c= -0.0023 and a=0.64, b=0.0377 c=0.0001 in ave- rage respectively. 2. The coefficients a and b for estimating the radiation analysed by the regression and arithmetic method from the daily ratio of sunshine hours and Rs to Ra were shown as a= 0.157, b= 0.529, and a=0.119, b= 0.726 in average, respectively. 3. The coefficients a and b for estimating the radiation calculated by the regression me- thod based on the monthly ratio of sunshine hours and radiation were shown as a=0. 319 and b= 0.557 in average. 4. The values of a and b for estimating the radiation taken from the relationship between the daily ratio of sunshine hours and radiation showed high significance level. 5. The standard deviation and the coefficient of variance between the radiation calculated from the coefficients by the regression and arithmetic method with the daily data and the actual radiation were analysed and compared to the results by the coefficients of the modified Penman method (a=0.18, b=0.55) and by those of the F.A.O inodified Penman method(a=0.25, b=0.5). The standard deviation and the coefficient of varia- nce by the regression method in this study showed the lowest value. 6. From the above results, it is suggested that regression method using the coefficients taken from the relationship between the ratio of sunshine hours and the ratio of radia- tion based on the daily data has the highest accuracy in estimating the radiation. 7. The average reference crop evapotranspiration estimating by the modified Penman me- thod using the coefficients a and b derived by the regression method from the daily meterological data was closer to the actual evapotsranspiration of grass measured in Suwon area than the estimated evapotranspiration by the modified Penman method and the F.A.O modified Penman method.

• Journal of the Korean Society for information Management
• /
• v.17 no.3
• /
• pp.21-43
• /
• 2000

Not only the infomatmn seeking bellavmr or acadenuc sources by social scientists was analyzed bnt its eiieclive usmg method was also presented in this paper. For thc purpose, the questionnaires were prepared md admmislered lo social sacnilsin who are the profcsso~s oi a large unlverslty m Taegu, Korea. and the survey for tiler academic environment and its sateiaclion, characterislics, inforn~ahon seeking behavior of academic sources, etc. was conducted. Also, iheir research mlercsts and period, informauon s e e h g behav~or and its dfficulties, reineval melhods, and uslng rrequcncies of current issues elc. were analyzed in lliis paper. The major hdings ol the quanm.live pa on the development 01 academic sources for soaal sciencc study and t11e11 uses for education md study m !hi7 study are: (1) Socid sclenhsts preferred acquiring matenal ihrougli internet. CD-ROM, and PC, etc, lo the traditional methods; (2) They spend approxinmtciy 41 days for collecihg matend they wanl. and each of them has petty various period la collect n~atenal and acquiring methods. (standard deviation : about 35 days); (3) The cilalion kequencies of fore~gu material was hi&r than domeslic one; (4) They, social sc~entists, have a pretty hard time to access and use the theses, journal, magazinc. mmol~ches and m s r o f i , CD-ROM malerid etc. technicdly; (5) The group that has morc sat~sIaclion to thesa aud more fiequenl participant ol seminar seek [or more recen issues of a journal lhrough ihc research modcl of melag. (6) The group thal has higher positioned and 1on.a tenure o: office can access lo shorter time at period lhau the one that bas lhe lowcr and the shortcr group. Also, tutule research topic and recommcndations [or a ~ocial saentlst are proposed and suggested when using a social science material

• Journal of the Korea Concrete Institute
• /
• v.18 no.6 s.96
• /
• pp.769-776
• /
• 2006

Recently, owing to the development of industry and the improvement of building techniques, concrete structures are becoming larger and higher. In hardening of these large connote structures, the heat of hydration gives rise to considerable thermal stress depending on the size and environmental condition of concrete, which might cause thermal cracking. Especially, the crack may cause severe damage to the safety and the durability of concrete structure. This study investigates the thermal properties of concrete according to several binder conditions, such as OPC, Belite rich cement(BRC), slag cement(SC), blast furnace slag(B) added cement fly ash(F) added cement and blast-furnace-slag and fly ash added cement. As a result of this study, the properly of concrete is most better BRC than others, and fly ash(25%) added cement and BFS(35%)-fly ash(15%) added cement gets superior effect in the control of heat hydration. But synthetically considered properties of concrete, workablity, strength heat hydration, etc, it is more effective to use mineral admixture. Especially, to be used Blast Furnace slag is more effective.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.41 no.4
• /
• pp.55-62
• /
• 2004

In this paper, we have developed a portable acceleration measurement system to measure acceleration signals during walking and a gait analysis algorithm which can evaluate gait regularity and symmetry and estimate gait parameters automatically. Portable acceleration measurement system consists of a biaxial accelerometer, amplifiers, lowpass filter with cut-off frequency of 16Hz, one-chip microcontroller, EEPROM and RF(TX/RX) module. The algerian includes FFT analysis, filter processing and detection of main peaks. In order to develop the algorithm, eight hemiplegic patients for training set and the other eight hemiplegic patients for test set are participated in the experiment. Acceleration signals during 10m walking were measured at 60 samples/sec from a biaxial accelerometer mounted between L3 and L4 intervertebral area. The algorithm, detected foot contacts and classified right/left steps, and then calculated gait parameters based on these informations. Compared with video data and analysis by manual, algorithm showed good performance in detection of foot contacts and classification of right/left steps in test set perfectly. In the future, with improving the reliability and ability of the algerian so that calculate more gait Parameters accurately, this system and algerian could be used to evaluate improvement of walking ability in hemiplegic patients in clinical practice.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.2
• /
• pp.43-49
• /
• 2010

Autonomic nervous system (ANS) acts as a control system functioning largely below the level of consciousness, and controls visceral functions. The activity of the ANS has been assessed by means of the heart rate variability (HRV). It has been reported that HRV is dependent on sex, age, body mass index, and smoking, etc. However, the effects of posture and sleep deprivation on HRV have rarely been reported. Objective of our work was to find out which posture is appropriate for stable HRV. We measured the number of sleep deprivation and HRV using power spectrum in six stages for 30 minutes. Increased low frequency (LF) power and high frequency (HF) power indicate enhanced sympathetic and parasympathetic activity, respectively. We determined the LF/HF ratio to minimize individual difference. It was found that sleep deprivation by awakening up subjects was affected by posture, which resulted in changes of LF/HF. Although LF/HF varied with time, it was more stable in sitting than in supine. In conclusion, we recommend sitting posture when measuring HRV because of less sleep deprivation resulting in less variation in LF/HF.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.2
• /
• pp.25-34
• /
• 2010

This paper proposed a high-speed voltage-controlled ring-oscillator(VCRO) using a frequency doubling technique. The design of the proposed oscillator has been based on TSMC 0.18um 1.8V CMOS technology. The frequency doubling technique is achieved by AND-OR operations with 4 signals which have $90^{\circ}$ phase difference one another in one cycle. The proposed technique has been implemented using a 4-stage differential oscillator compose of differential latched inverters and NAND gates for AND and OR operations. The differential ring-oscillator can generate 4 output signals, which are $90^{\circ}$ out-of-phase one another, with low phase noise. The ANP-OR operations needed in the proposed technique are implemented using NAND gates, which is more area-efficient and provides faster switching speed than using NOR gates. Simulation results show that the proposed, VCRO operates in the frequency range of 3.72 GHz to 8 GHz with power consumption of 4.7mW at 4GHz and phase noise of ~-86.79dBc/Hz at 1MHz offset. Therefore, the proposed oscillator demonstrates superior performance compared with previous high-speed voltage-controlled ring-oscillators and can be used to build high-performance frequency synthesizers and phase-locked loops for radio-frequency applications.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.2
• /
• pp.40-46
• /
• 2011

This paper proposes a real-time face detection and tracking system that uses neural oscillators which can be applied to access regulation system or control systems of user authentication as well as a new algorithm. We study a way to track faces using the neural oscillatory network which imitates the artificial neural net of information handing ability of human and animals, and biological movement characteristic of a singular neuron. The system that is suggested in this paper can broadly be broken into two stages of process. The first stage is the process of face extraction, which involves the acquisition of real-time RGB24bit color video delivering with the use of a cheap webcam. LEGION(Locally Excitatory Globally Inhibitory)algorithm is suggested as the face extraction method to be preceded for face tracking. The second stage is a method for face tracking by discovering the leader neuron that has the greatest connection strength amongst neighbor neuron of extracted face area. Along with the suggested method, the necessary element of face track such as stability as well as scale problem can be resolved.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.2
• /
• pp.15-21
• /
• 2011

In this paper, an energy management circuit for solar energy harvesting system is designed in $0.35{\mu}m$ CMOS technology. The solar energy management system consists of an ISC(Integrated Solar Cell), a voltage booster, and an MPPT(Maximum Power Point Tracker) control unit. The ISC generates an open circuit voltage of 0.5V and a short circuit current of $15{\mu}A$. The voltage booster provides the following circuit with a supply voltage about 1.5V. The MPPT control unit turns on the pMOS switch to provide the load with power while the ISC operates at MPP. The SEMU(Solar Energy Management Unit) area is $360{\mu}m{\times}490{\mu}m$ including pads. The ISC area is $500{\mu}m{\times}2000{\mu}m$. Experimental results show that the designed SEMU performs proper MPPT control for solar energy harvested from the ISC. The measured MPP voltage range is about 370mV∼420mV.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.2
• /
• pp.47-55
• /
• 2011

Hemorrhagic shock is a cause of one third of death resulting from injury in the world. Early diagnosis of hemorrhagic shock makes it possible for physician to treat successfully. The objective of this paper was to select an optimal classifier model using physiological signals from rats measured during hemorrhagic experiment. This data set was used to train and predict survival rate using artificial neural network (ANN) and support vector machine (SVM). To avoid over-fitting, we chose the best classifier according to performance measured by a 10-fold cross validation method. As a result, we selected ANN having three hidden nodes with one hidden layer and SVM with Gaussian kernel function as trained prediction model, and the ANN showed 88.9 % of sensitivity, 96.7 % of specificity, 92.0 % of accuracy and the SVM provided 97.8 % of sensitivity, 95.0 % of specificity, 96.7 % of accuracy. Therefore, SVM was better than ANN for survival prediction.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.49 no.2
• /
• pp.55-62
• /
• 2012

Convergence of information technology (IT) and medical devices enables people to measure health-related information ubiquitously, such as measuring blood glucose at home and checking cardiac signals during exercise and it allows us to access to medical care anywhere and anytime. Nowadays, the market for U-healthcare medical devices is growing rapidly, but guidelines for the evaluation of safety and effectiveness of such devices remain to be formulated. We performed a study on the development of safety and performance evaluation method for portable, hand-held, U-healthcare medical devices. We reviewed current guidelines and standards for home-health devices from the Korea Food and Drug Administration (KFDA) and related international committees such as the ISO/IEEE and CE. We summarized the test methods and items for the evaluation of safety and performance related to U-healthcare medical devices from the above guidelines and standards. We defined requirements for a U-healthcare medical device to demonstrate good performance. In conclusion, we propose an evaluation method for U-healthcare medical devices, which will help improve the safety and reliability of these devices.