• Applied Biological Chemistry
• /
• v.20 no.2
• /
• pp.205-209
• /
• 1977

The pool size of plasma glucose, turnover rate and other concerned items for glucose metabolism in normal laying hen were investigated by a single-injection method using $U-C^{14}-glucose$. The 11.6 nCi of pure dose was injected to a hen normally fed through the wing vein. The glucose concentration in plasma sample taken at 5 minutes after injections was 214mgper 100ml. From the plottings of logarithmic standard specific activities of plasma taken from 5 to 120 minutes against the time after injection and from the regresion analysis, metabolic states were determined. The pool size was 1.07g, turnover rate was 0.024 per minute, turnover time was 41 minutes, utilization rate was 26mg/min. (0.83 g/hr/kg B.W. 3/4) and glucose space(extracellular fluid volume) was 25.3 per cent of body weight. The values obtained from. 10-50 minutes samples were similar to those described above, which we from 5-120 minutes samples.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.2
• /
• pp.132-137
• /
• 2011

BACKGROUND: This experiment was carried out to evaluate the effect of potassium fertigation on the growth and yield of fourteen years-old 'Campbell Early' grapevine (Vitis labrusca L.) on a sandy loam soil. METHODS AND RESULTS: Potassium application (125 kg/ha/yr) was top-dressed as 30% of annual potassium application in all treatments and the remainders were drip-irrigated with 0 (0% of total K, K0 level of the remainder), 25 (17.5% of total K, K1/4 level of the remainder), 50 (35% of total K, K1/2 level), and 100mg/L (70% of total K, K1 level) in the intervals of 2 times a week for 12 weeks and the effect of K drip fertigation was compared to control treatment in which the K remainder was applied with surface application as additional fertilizer. The growth of stem diameter, leaf number and shoot length were highest in K1/2 (50 mg/L K), but K of mineral contents was lowest in K0. Yield of grapevine was no difference in 2008, but significantly higher K1/2 than other treatments in 2009. However, fruit quality (color degree, brix, acid contents) was no difference among the treatment. CONCLUSION(s): From the results, It is expected that K1/2 levels of fertigation based on soil testing could be more efficient to get optimum yield and save potassium fertilizer than control (surface application) treatments when grapevine was drip-irrigated at open field condition.

• Tuberculosis and Respiratory Diseases
• /
• v.49 no.2
• /
• pp.217-224
• /
• 2000

Background : It is well known that when macrophages are stimulated with endotoxin, they produce a wide variety of cytokine mediators, including TNF-$\alpha$ and IL-1$\beta$. However, there is an alteration in the macrophages' responsiveness when they are challenged with repeated bouts of endotoxin, termed "endotoxin tolerance" which is regarded as a self-protective phenomenon from continuous stimulation. In this study, endotoxin tolerance in the peripheral blood monocytes of sepsis patients was evaluated. Methods : Fourteen patients with organism-documented sepsis were included. The severity of illness was evaluated by APACHE II score. Peripheral blood monocytes were isolated from the patients and diluted to $1{\times}10^5$ well. After stimulation with endotoxin (LPS of E. coli O114 : B4, 100 ng/ml), they were incubated at $37^{\circ}C$ in 5% $CO_2$ incubator for 24 hours. Supernatant was collected for the measurement of TNF-$\alpha$ and IL-1$\beta$ with ELISA method. Peripheral blood monocytes of seven healthy volunteers were used as control. Results : The APACHE II score (mean$\pm$SD) of the patients at the time of blood sampling was 12.2$\pm$5.7. The primary infection foci were urinary tract infection, pneumonia, subacute bacterial endocarditis, and catheter related infection, etc. The causative organisms were gram negative rods (10 cases), gram positive cocci (6 cases) with two cases of mixed infection. Serum TNF-$\alpha$ could be measured in 4 cases with 29.9$\pm$27.7 pg/ml. Serum IL-1$\beta$was measurable in only one patient. The TNF-$\alpha$ level of supernatant of cultured peripheral blood monocytes was 2,703$\pm$2,066 pg/ml in patients and 2,102$\pm$1914 pg/ml in controls. The IL-1$\beta$level of supernatant was 884$\pm$1,050 pg/ml in patients and 575$\pm$558 pg/ml in controls. There was no difference of TNF-$\alpha$ and IL-1$\beta$ level between patients and controls. Conclusion : We cannot prove the phenomenon of endotoxin tolerance in this study. Future study needs to be focused on the more severe sepsis patients who were taken for sampling earlier. Addition of serum to the culture medium could be an another valuable option for the success of this study.

• Clinical and Experimental Reproductive Medicine
• /
• v.4 no.1
• /
• pp.17-25
• /
• 1977

Anderson(1937), Power and Barnes(1941) reported a study concerning a method of tubal sterilization in association with peritoneoscopy or laparoscopy in which they cauterized the tubes. There appears to have been a hiatus of interest in sterilization (cold or hot) associated with laparoscopy until reintroduction by Palmer(1963), Frangenheim(1964) and Steptoe(1967). On the other hand, for interval female sterilization, however, minilaparotomy is relatively new. By Saunder and Munsick(1972), John Lyle(1974), Frank Stubb(1974), Vitoon(1973) and B.C. Bai(1975), their own technique for interval female sterilization requires 2.0 to 2.5cm, incision at the margin of the mons pubis. In Korea, female sterilization by means of minilaparotomy firstly reported by B.C. Bai using Bai's uterine elevator, of his own device, early in 1975. Recently inteval female sterilization by laparoscopy and minilaparotomy are widely accepted throughout the world especially in Asian countries. Minilaparotomy is carried out from 1974, laparoscopic sterilization from 1976, and in this study each of 250 cases of those were analysed and discussed for the comparison at Seoul Red Cross Hospital. (1) In the age distribution, numerous clients were in their age of $31{\sim}35$ in laparoscopy as well as minilaparotomy. Average 33.7 years in L and 33.2 years in M. (M=minilaparotomy, L=laparoscopic sterilization) (2) As regarding living children, women having 3 children represented the greatest number, 113 cases out of 250 in M group and 102 cases out of 250 in L group. Average No. of child are 2.9 in Land 3.1 in M. (3) Concidering the operation day in the menstrml cycle, the greatest number of cases, those who underwent tubal sterilization during the days of $26{\sim}$, next during the $6{\sim}10$ days of the cycle in both group. (4) Concidering the operation time, 188 cases by laparoscopy were performed in $6{\sim}10$ minutes, 33 cases within 5 minutes and 24 cases in $11{\sim}15$ minutes. Maximum 50 minutes, minimum 4 minutes and average 8.3 minutes. The majority of cases (154 cases) by minilaparotomy required $6{\sim}10$ minutes and 67 cases $11{\sim}15$ minutes, 6 cases within 5 minutes. Maximum 30 minutes, minimum 4 minutes and average 10.4, minutes. In both groups, most of the reasons for the extra length were surgical difficulties such as thick abdominal wall, pelvic adhesion, less cooperation of patients in early period of this study. (5) Hospital stay after operation in L group required $3{\sim}4$ hours in 125 cases, $2{\sim}3$ hours in 41 cases, $4{\sim}5$ hours in 32 cases out of 250. Maximum 8 hours, minimum 1 hour and average 3.8 hours. In M group hospital stay required $6{\sim}7$ hours in 100 cases, over 7 hours in 85 cases, $5{\sim}6$ hours in 46 cases and so on. Maximum 14 hours, minimum 2 hours and average 6.5 hours. (6) The time between operation and gas passing in the majority cases of both groups, were $12{\sim}36$ hours. A veragetime 20.3 hours in L and 27.2 in M. (7) Laparoscopic sterilization coincident with induced abortion were carried out in 27 cases, laparoscopy with minilaparotomy to control for mesosalpingeal hemorrhage in 1 case. Minilaparotomy coincident with induced abortion were performed in 65 cases, D and C whit polypectomy, menstrual regulatian, and remaval of IUD in 1 case respectively. (8) In L group, 1 case of mesosalpingeal hemorrhage, 1 case of abdominal wall infection were complicated during operation. In M group, 1 case of uterine perfaration, 1 case of abdominal wall infection, 1 case of hemorrhage from omentum and 1 case of bloody vaginal discharge were complicated. No intensive medical treatment was required for those minor complications in both groups. (9) No failure has been recognized and these two sterilization techniques might be the simple, safe and the most effective method for permanent contraception at present time. There is no significant clinical defference between L and M group in this study.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2003.05a
• /
• pp.273-280
• /
• 2003

The purpose of this study is to identify and evaluate the competitiveness of ports in ASEAN(Association of Southeast Asian Nations), which plays a leading role in basing the hub of international logistics strategies as a countermeasure in changes of international logistics environments. This region represents most severe competition among Mega hub ports in the world in terms of container cargo throughput at the onset of the 21 st century. The research method in this study accounted for overlapping between attributes, and introduced the HFP method that can perform mathematical operations. The scope of this study was strictly confined to the ports of ASEAN. which cover the top 100 of 350 container ports that were presented in Containerization International Yearbook 2002 with reference to container throughput. The results of this study show Singapore in the number one position. Even compared with major ports in Korea (after getting comparative ratings and applying the same data and evaluation structure), the number one position still goes to Singapore and then Busan(2) and Manila(2), followed by Port Klang(4), Tanjugn Priok(5), Tanjung Perak(6), Bangkok(7), Inchon(8), Laem Chabang(9) and Penang(9). In terms of the main contributions of this study, it is the first empirical study to apply the combined attributes of detailed and representative attributes into the advanced HFP model which was enhanced by the KJ method to evaluate the port competitiveness in ASEAN. Up-to-now, none have comprehensively conducted researches with sophisticated port methodology that has discussed a variety of changes in port development and terminal transfers of major shipping lines. Moreover, through the comparative evaluation between major ports in Korea and ASEAN, the presentation of comparative competitiveness for Korea ports is a great achievement in this study. In order to reinforce this study, it needs further compensative research, including cost factors which could not be applied to modeling the subject ports by lack of consistently qualified in ASEAN.

• Nuclear Engineering and Technology
• /
• v.39 no.5
• /
• pp.603-616
• /
• 2007

Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.26 no.1
• /
• pp.56-68
• /
• 1981

A maize line was selected in 1979 among 1000 Korean local maize lines collected in 1977. The selected maize line was characterized by having three to four tillers and eight to 10 ears on each individual plant. The line was assumed to have a great potential as a silage crop. The investigation was conducted as one of the serial studies on the Korean maize collected lines to provide basic information on the genetic variabilities of the multi-eared and tillered (MET) line and on other agronomic characters, prior to use the line as material for future breeding works for silage crop. The MET line and Suwon #19, single cross hybrid, as check variety were planted on May 1, 15 and 30, in three different levels of plant populations. The results obtained were summarized as follows: 1. The genetic variabilities of multi-ear and tillering habits were greater than environmental variabilities. 2. Total dry leaf weight of individual plant of MET line was also significantly higher than that of Suwon #19. 3. The mean number of tillers and ears bearing on the individual plant of MET line varied greatly with plant densities. The number of tillers and ears was on the average 2.9 and 7.0, respectively, when planted in 60cm. by 60cm. 4. The total dry matter and dried stem weight of the individual plant on MET line were comparable to those of Suwon #19. 5. The kernel weight from the individual plant of MET line was 5 to 40% less than that of Suwon #19, depending upon the plant densities. 6. The Kernel to stover ratio was higher for Suwon #19 than for the MET line. (41% to 35%). 7. The MET line had shown first tiller two weeks after planted on May 1. The second and third tillers appeared three to five days after the appearance of the first tiller. 8. The MET line was very specific in tillering habits. All the tillers were borne on the first few nodes of main stem below the soil surface. 9. The tillering habits of MET line were vigorous in the early part of the growing season, but less vigorous in the later part of the growing season. The number of efficient tillers bearing useable ears, was around two to three, when planted in 60cm. by 60cm. 10. The difference of plant height between main stem and first few tillers was around 10cm. 11. The ear size of MET line was around one-third of the major corn belt hybrids. The shape of ear of MET line was conical, with different diameter. 12. The kernel of the MET line was flinty with small soft starch patches on the endosperm part. 13. The 100 kernel weight was around 15gr., which is about one half of the major high yielding hybrids. 14. The ear height of MET line was comparatively higher than that of Suwon #19. 15. Significantly high and positive phenotypic correlation coefficients were obtained among major plant characters. 16. The growth rate of MET line was slower than that of Suwon #19. 17. MET line and Suwon #19 were both heavily infected with black streaked mosaic virus.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.4
• /
• pp.703-712
• /
• 2002

This study was carried out to examine the interest in menu and food purchase of housewives living in Yosu, Chonnam. The survey was conducted by questionnaire including question about general characteristics of the subjects, meal planning and food purchase from October to November in 2000. The major general characteristics of subjects are summarized as follows: The forties was 39%, having a job was 44.5%, a high school education was 53.0%, and 1~2 million won in monthly household income was 50.1%. A couple with children was 75% and a 3~4 headed family was 57%. An apartment resident was 67% and one's own house was 67%. The higher the education level was, the higher the percentage of menu preparation and necessity was significantly (p<0.0001). On grocery purchase, the percent of planned purchase was higher than that of impulse purchase, which was higher in housewives without a job. The subject's favorite place for grocery purchase was a traditional market. The higher the age of subjects and the lower the education level of subjects were, the higher the grocery purchase at a traditional market was. However, the younger subjects and subjects with higher education level preferred to purchase groceries in a mart stores in an apartment, and supermarkets in order (p<0.0001). The factors to be considered during purchasing grocery were freshness of materials, price, nutrient, and taste in order. The results of this study showed that it is necessary to educate older person for importance of planning menu and encourage housewives with a job to plan grocery purchase to provide nutritionally adequate meals at reasonable coast.

• Journal of the Korean Society of School Health
• /
• v.6 no.2
• /
• pp.89-100
• /
• 1993

This study intended to examine closely the reasons which influence the health status and to health behavior of teenagers and plan the development of the school health education. The subject of this study was the boys, and girls' high school students in Chonguy city. The number of them was totally 632 and the period was from July 9 to 14, 1990. 1. The Health Status of Teenagers. I have examined closely the health status of teenagers. They answered they continued to go to school. ever though the majority of teenagers had troubles in their sleeping and felt sick As for one's health, most of teenagers were in a good condition and were sometimes worrying about their health condition. 2. The Degree of Interest and Responsibilities of Teenagers for Their Own Health. In the responsibility of teenagers for their own health the answer, 'my health depends on my taking care of it', had the highest grade, 4.67. And the answer, 'I am in a good health condition because I have taken of my health very well', had the lowest average, 4.1. In the degree of interest of teenagers for their own health, the problem of studying had the highest degree, 4.48 and the use of drugs, the smoking behavior, masturbation, the drinking behavior and the birth control were the lowest degree. 3. The Health Behavior of Teenagers. In this part, teenagers performed about 64 percent's health behavior on the point of 3.37. 4. The Comparison of the Health Behavior, the Health Responsibility and the Health Interest of the Subject According to the General Characteristics. The results were as follows: 1) There are significantly different in the health behavior according to sex (t=6.23, p<.001), smoking experience (t=5.33, p<.001), living place (t=5.09, p<.001), ranking of brothers (F=4.19, p<.01), economic situation(F=6.57, p<.001). 2) There is significantly different in the health responsibility according to sex(t=2.31, p<.05), experiencd by disease(t= 1.92, p<.05). 3) There are significantly different in the health interest according to the chronic disease experience of family (t=3.29, p<.001), smoking experience(t=2.71, p<.01). 5. The Correlation of the Health Behavior, the Health Responsibility, the Health Interest and the Health Locus of Control of the Subject. The health behavior showed the positive correlation with the health responsibility (r=.2906, p<.001), and the health responsibility showed the positive correlation with the health interest (r=.0938, p<.01). Also the health behavior showed the positive correlation with powerful others health locus of control (r=.2606, p<.001), and internal health locus of control (r=.2023, p<.001), the health responsibility showed the positive correlation with internal health locus of control (r=.4541, p<.001), and chance health locus of control(r=.1352, p<.001), and the health interest showed the positive correlation with internal health locus of ccntrol (r=.0920, p<.001), powerful others health iocus of control (r=.1907, p<.001 chance health locus of control (r=.1191, p<.01). On the basis of the above result, we can find the fact that the interest of teenagers for their own health is increasing. And so, it is necessary for the school health management to establish the new curriculum which strengthens the health education for the planning of one's desirable health management. Besides we need efforts to develop the standard scale through the analysis of all reasons which influences the tenagers' health status and health behavior.

• Journal of the Korean Wood Science and Technology
• /
• v.13 no.1
• /
• pp.19-62
• /
• 1985

This study was performed to investigate: (i) the bending processing properties of silk worm oak (Quercus acutissima Carr.) and Korean red pine (Pinus densiflora S. et Z.) by boiling and steaming treatments; (ii) the effects of interrelated factors - sapwood and heartwood, annual ring placement, softening temperature and time, moisture content. and wood defects on bending processing properties; (iii) the changing rates of bending radii after release from a tension strap, and (iv) the improving methods of bending process by treatment with chemicals. The size of specimens tested was $15{\times}15{\times}350mm$ for boiling and steaming treatments and $5{\times}10{\times}200mm$ for treatments with chemicals. The specimens were green for boiling treatments and dried to 15 percent for steaming treatments. The specimens for treatments with chemicals were soaked in saturated urea solution, 35 percent formaldehyde solution, 25 percent polyethylene glycol -400 solution, and 25 percent ammonium hydroxide solution for 5 days and immediately followed the bending process, respectively. The results obtained were as follows: 1. The internal temperature of silk worm oak and Korean red pine by boiling and steaming time was raised slowly to $30^{\circ}C$ but rapidly from $30^{\circ}C$ to $80-90^{\circ}C$ and then slowly from $80-90^{\circ}C$ to $100^{\circ}C$. 2. The softening time required to the final temperature was directly proportional to the thickness of specimen. The time required from $25^{\circ}C$ to $100^{\circ}C$ for 15mm-squared specimen was 9.6-11.2 minutes in silk worm oak and 7.6-8.1 minutes in Korean red pine. 3. The moisture content (M.C.) of specimen by steaming time was increased rapidly first 4 minutes in the both species, and moderately from 4 to 20 minutes and then slowly and constantly in silk worm oak, and moderately from 4 to 15 minutes and then slowly and constantly in Korean red pine. The M.C. of 15mm-squared specimen in 50 minutes of steaming was increased to 18.0 percent in the oak and 22.4 percent in the pine from the initial conditioned M.C. of 15 percent The rate of moisture adsorption measured was therefore faster in the pine than in the oak. 4. The mechanical properties of the both species were decreased significantly with the increase of boiling rime. The decrement by the boiling treatment for 60 minutes was measured to 36.6-45.0 percent in compressive strength, 12.5-17.5 percent in tensile strength, 31.6-40.9 percent in modulus of rupture, and 23.3-34.6 percent in modulus of elasticity. 5. The minimum bending radius (M.B.R.) of sapwood and heartwood was 60-80 mm and 90 mm in silk worm oak, and 260 - 300 mm and 280 - 300 mm in Korean red pine, respectively. Therefore, the both species showed better bending processing properties in sapwood than in heartwood. 6. The M.B.R. of edge-grained and flat-grained specimen in suk worm oak was 60-80 mm, but the M.B.R. in Korean red pine was 240-280 mm and 260-360 mm, respectively. Comparing the M.B.R. of edge-grained with flat-grained specimen, in the pine the edge-grained showed better bending processing property than the flat-grained. 7. The bending processing properties of the both species were improved by the rising of softening temperature from $40^{\circ}C$ to $100^{\circ}C$. The minimum softening temperature for bending was $90^{\circ}C$ in silk worm oak and $80^{\circ}C$ in Korean red pine, and the dependency of softening temperature for bending was therefore higher in the oak than in the pine. 8. The bending processing properties of the both species were improved by the increase of softening time as well as temperature, but even after the internal temperature of specimen reaching to the final temperature, somewhat prolonged softening was required to obtain the best plastic conditions. The minimum softening time for bending of 15 mm-squared silk worm oak and Korean red pine specimen was 15 and 10 minutes in the boiling treatment, and 30 and 20 minutes in the steaming treatment, respectively. 9. The optimum M.C. for bending of silk worm oak was 20 percent, and the M.C. above fiber saturation point rather degraded the bending processing property, whereas the optimum M.C. of Korean red pine needed to be above 30 percent. 10. The bending works in the optimum conditions obtained as seen in Table 24 showed that the M.B.R. of silk worm oak and Korean red pine was 80 mm and 240 mm in the boiling treatment, and 50 mm and 280 mm in the steaming treatment, respectively. Therefore, the bending processing property of the oak was better in the steaming than in the boiling treatment, but that of the pine better in the boiling than in the steaming treatment. 11. In the bending without a tension strap, the radio r/t of the minimum bending radius t to the thickness t of silk worm oak and Korean red pine specimen amounted to 16.0 and 21.3 in the boiling treatment, and 17.3 and 24.0 in the steaming treatment, respectively. But in the bending with a tension strap, the r/t of the oak and the pine specimen decreased to 5.3 and 16.0 in t he boiling treatment, and 3.3 and 18.7 in the steaming treatment, respectively. Therefore, the bending processing properties of the both species were significantly improved by the strap. 12. The effect of pin knot on the degradation of bending processing property was very severe in silk worm oak by side, e.g. 90 percent of the oak specimens with pin knot on the concave side were ruptured when bent to a 100 mm radius but only 10 percent of the other specimens with pin knot on the convex side were ruptured. 13. The changing rate in the bending radius of specimen bent to a 300 mm radius after 30 days of exposure to room temperature conditions was measured to 4.0-10.3 percent in the boiling treatment and 13,0-15.0 percent in the steaming treatment. Therefore, the degree of spring back after release was higher in the steaming than in the boiling treatment. And the changing rate of moisture-proofing treated specimen by expoxy resin coating was only -1.0.0 percent. 14. Formaldehyde, 35 percent solution, and 25 percent polyethylene glycol-400 solution found no effect on the plasticization of the both species, but saturated urea solution and 25 percent ammonium hydroxide solution found significant effect in comparison to non-treated specimen. But the effect of the treatment with chemicals alone was inferior to that of the steaming treatment, and the steaming treatment after the treatment with chemicals improved 10-24 percent over the bending processing property of steam-bent specimen. 15. Three plasticity coefficients - load-strain coefficient, strain coefficient, and energy coefficient - were evaluated to be appropriate for the index of bending processing property because the coefficients had highly significant correlation with the bending radius. The fitness of the coefficients as the index was good at load-strain coefficient, energy coefficient, and strain coefficient, in order.