• 한국안전학회지
• /
• 제15권2호
• /
• pp.103-110
• /
• 2000

This paper deal with the stability evaluation and suggestion of progressive failure slope in biotite granite area of Andong. Based on geological site investigation and field test, stability analysis of slope was performed in conjunction with limit equilibrium methods and stereographic projection. Additionally, initial design and construction procedure was critically evaluated. Series of the slope stability analysis reveals the detection of local wedge and plane failure under the current slope condition. It is additionally appeared that a certain synthetic behavior of circle and plane failure exists on the right spot where the overall failure's going in progress. In order to construct more stable slope based on the suitability for the real state of the slope circumstances, this study issues a solution to eliminate the primary factors which cause the instability, by means of the grade of weathering and RMR classification of rock mass.

• 한국지반환경공학회 논문집
• /
• 제11권12호
• /
• pp.19-25
• /
• 2010

기초조사란 위험비탈면에 실시하는 정밀조사와는 달리 비탈면의 현황을 파악하고자 실시한다. 과거 기초조사자료를 토대로 하여 전국 국도변에 분포하고 있는 비탈면의 일반현황을 분석하였다. 또한 비탈면 일반 현황과 붕괴가 발생한 비탈면에 대한 비교분석을 통하여 유지관리 시 중요한 사항에 대하여 연구를 수행하였다. 10년 전 붕괴가 발생된 자료와 현재 붕괴된 자료를 통하여 비탈면 파괴 유형 및 대책공법의 적용에 대한 변화 추이를 분석하였다. 추후 원인별 붕괴형태 분석 및 대책공법과의 연관성을 연구하려 한다.

• Journal of Biosystems Engineering
• /
• 제24권5호
• /
• pp.383-390
• /
• 1999

When a tractor travels slope lands, problems of operator safety and the reduction of job efficiency usually occur. Therefore, maintaining the tractor body being horizontal is critical to improve the security of traveling and the job performance. An experiment was made in a soil bin using the experimental model system built and equipped with a leveling control system. Adaptability of the control system was tested and investigated by analyzing system response in time and frequency domains. Control response time of hydraulic cylinder with 10lpm flow rate on a step input of 10$^{\circ}$slope was about 0.42sec. And it showed a linearly increasing trend without any hunching state. A steady state error of 0.6$^{\circ}$occurred but it was negligible. The hydraulic control system showed a little phase differences within the range of 0.4Hz input frequency. The experimental model showed that implementation of the proposed tractor control system to on slope lands tractor was feasible.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.247-249
• /
• 2006

This paper describes a new method to eliminate the baseline wander for ECG based on waveform morphology analysis. This method uses the descending slope tracing waves[3] to separate the baseline wander from ECG and approximates the separated baseline wander to a corresponding approximated S-waves contour, and finally, subtracts the approximated S-waves contour from the original ECG. To verify its efficacy and validity in practical applications, this method has been applied to MIT/BIH database and compares this method with the other method employing the ascending slope tracing waves to remove a baseline from ECG[4].

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.720-723
• /
• 2006

This study performed slope stability analysis by changing analysis methods and shear strength with the slope stability analysis program. The conclusions of the study are as follows. 1) The safe factor of clayey soil applied with Bishop's simple method turned out to be similar to or slightly higher than those of other methods, for both dry and saturated conditions. 2) The safe factor of sandy soil applied with GLE method turned out to be slightly higher than those of other methods. But when applied with Bishop's simple method, it appeared to be slightly higher than those of other methods. 3) The safe factor of ordinary soil applied with GLE method showed the highest result. 4) Janbu method showed the lowest safe factor among all the methods for the above three types of soils.

• 한국환경과학회지
• /
• 제9권1호
• /
• pp.13-18
• /
• 2000

The purpose of this study is to estimate the low-flow statistics at the mountainous watershed. The formulation for the estimation of the design low-flow statistics was obtained by means of a hydraulic approach applied to a simple conceptual model for a mountainous watershed. Three of the independent variables associated with the low-flow statistics is watershed area(A), average basin slope(S) and the base flow recession constant(K); Watershed area was measured from topographic maps and average basin slope is approximated in this study using Strahler's slope determining method. And base flow recession constant computed using Vogel and Kroll's method. Unfortunately, this method is usually unavailable at ungaged sites. In this study, recession constant at ungaged sites is estimated using graphical regression method used by Giese and Mason. The model for estimating low-flow statistics were applied to all 61 catchments in the Sumjin, Mankyung basin.

• Korean Journal of Hydrosciences
• /
• 제1권
• /
• pp.61-71
• /
• 1990

The characteristics of radial thickness of ice jam at the center part of channel bends were analyzed briefly in this paper. Jam thickness in channel bends increases both toward the inner bank, and dowmstream. For this study, slope at the jam's underside was assumed to be liner with similarity of radial slope of bed in alluvial bends. Radial slope at the jam's underside in floating ice elements was estimated using the force equilibrium theory in the radial direction. The eqution which can be estimated the radial slope of ice jam was suggested using Falcon and Kennedy's bed layer theory. Experimental data, which were measured at the center part of cross-section in a single 180-degree bend, were compared to the calculated values using the suggested equtions. The result shows that the calcultated values were smaller than the measured ones. Ot is considered that the estimated value of shear stress in the radial direction may be smaller than the actual and two-layer model may be not suibable for alluvial bend flow.

• 지질공학
• /
• 제19권1호
• /
• pp.89-98
• /
• 2009

암반내의 핵석의 존재는 불안전한 요소로 작용하고 있으며 특히, 절개사면의 경우 노출이 되지 않더라도 핵석이 풍화정도의 차이에 따라 사면의 불연속면 증가 또는 강도 감소가 되며 사면의 낙석이나 붕괴등 사면 거동의 중요한 요소로 작용한다. 연구대상 사면은 20여년전 절개가 완료되어 일부분 사면보강을 완료하였으나 적은 강우에도 잦은 낙석이 발생하여 항구적인 안정대책이 시급한 실정이었다 탄성파탐사와 사면지질조사 견과를 비교 분석하여 핵석의 분포특성 및 규모를 파악할 수 있었다. 또한 주변 암반사면에서 DIPS 프로그램을 이용한 평시투영을 실시하여 주변 풍화토 사면에서의 핵석 분포특성 및 규모 파악에 대하여 검토하였다.

• 한국재난정보학회 논문집
• /
• 제14권4호
• /
• pp.421-429
• /
• 2018

연구목적 : 본 연구는 기후변화에 따른 강우량 및 강우패턴을 분석하여 강우시 비탈면 거동을 파악하기 위해 강우사상을 합리적으로 적용하여 절토부 비탈면 안정성해석에 활용하고자 수치해석기법을 이용하여 비탈면 높이별, 강우사상별 침투해석을 실시하여 강우사상 및 강우지속시간에 따른 지하수위 변화를 고려한 비탈면 안정성검토를 실시하였다. 연구결과 : 강우사상(Uniform Rainfall, US Army Corps., Huff 4분위법 중 1/4법 및 4/4법)에 따른 화강풍화토 비탈면의 수치해석결과 비탈면이 높을수록 침투된 강우가 지하수위까지 빠르게 도달하지 못하여 지하수위 상승은 작아지고, 비탈면의 안전율도 작게 분석되었다. 결론 : 초기강우강도가 제일 큰 강우패턴 Case 3조건인 Huff 4분위법 중 1/4법에서 지하수위 상승량이 제일 크게 나타났으며, 안전율은 가장 작게 나타났다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.193-200
• /
• 2000

Numerical analysis of slope stability is presented using slice method, static seismic analysis methods, and earthquake response analysis methods. Static seismic force is considered as 0.2g while vertical static seismic force is not considered in analysis. For earthquake response analysis, Hachinohe-wave is applied. Safety factor calculated using slice method for failure surface. Calculating methods are Bishop's method and Janhu's method. Static seismic analysis was applied using Mhor-Coulomb model and earthquake response analysis was applied using non-linear elastic model.