• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.2001-2005
• /
• 2005

The tensile test is generally used to measure mechanical properties with conventional fracture test. This test is extremely certain method to measure Young's modulus, yield strength, tensile strength and so on. ASTM, by international standard, prescribes two classes of tensile tests in tubular products. One is method that specimens aren't done by any process with Tube-shape. The other is that specimens are made on process for C-shape. In this paper, we would like to present the new-shape specimens for the tensile test. The presented specimen's shape is that put two pieces of C-shape specimens together. Besides a load point and a support point are fixed like Tube-shape specimens. This shape of specimen has a difference that existing specimen is made on one-step process out this specimen is made on two-step process. This shape is considered that stress concentration phenomenon occurs at the reduced section if a specimen is made on one step process.

• 패션비즈니스
• /
• 제26권1호
• /
• pp.30-40
• /
• 2022

This study aims to provide basic information on the changes in lower body measurements and shapes of women in their 20s for developing better fitting slacks patterns and a more applicable sizing system that can be widely utilized for women of all ages. Factor and cluster analysis were performed on 1,360 women's direct measurement data within the age group from the 5^th (2004) and 7^th (2015) Korean Human Body Measurement Investigation. The factor analysis identified four factors and explained 82.54% of the total variance; Factor 1, horizontal measurements of lower body; Factor 2, vertical lengths of lower body; Factor 3, measurements of leg and hip areas; Factor 4, lengths of hip and crotch areas. The cluster analysis categorized the lower body shapes of each age group into four shapes; Shape 1, a petite lower body with short legs; Shape 2, a long lower body with medium built; Shape 3, an obese abdomen and legs; Shape 4, a short and slim lower body. Shape 4 (36.5%), Shape 2 (31.2%), Shape 1 (27.8%), and Shape 3 (4.5%) were placed in the order of frequency from the highest to lowest among all the age groups. The findings of this study showed gradual changes in the lower body measurements and shapes of women in their 20s and relevant physical features of each age group. They can be utilized for developing women's slacks patterns with better fitting and more comfort.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1660-1663
• /
• 2003

This paper present the characteristics of radiation pattern of microstrip slot antenna on the ground plane fed by microstrip line. It is proposed for resonance frequency at 10 GHz. We will analysis two shape of slot antenna; double L-shape slot antenna and U-shape slot antenna. In this case, we will compare far-field radiation pattern of two shape slot antenna. Far-field radiation pattern of double L-shape slot antenna is bi-directional nevertheless U-shape slot antenna is uni-directional. The microstrip slot antenna is propose to analyze far-field radiation pattern for use in the wireless communication systems

• 동력기계공학회지
• /
• 제15권5호
• /
• pp.83-90
• /
• 2011

In general, 20-high Sendzimir mills(ZRM) use small diameter work rolls to provide massive rolling force. Because of small diameter of work rolls, steel strip has a complex shape mixed with quarter, edge and center waves. Especially when the shape of the strip is controlled automatically, the actuator saturation occurs. These problems affect the productivity and quality of products. In this paper, the problems in automatic shape control of ZRM were analyzed. In order to evaluate the problems for the automatic shape control in ZRM, recognition performance was analyzed by comparing the measured shape and the recognized shape. The actuator positions by the shape recognition and the manual operation were compared. From the analysis results, the necessity of the improvement of recognition performance in ZRM is suggested.

• Journal of Mechanical Science and Technology
• /
• 제17권10호
• /
• pp.1496-1506
• /
• 2003

The SIMP (solid isotropic material with penalization) approach is perhaps the most popular density variable relaxation method in topology optimization. This method has been very successful in many applications, but the optimization solution convergence can be improved when new variables, not the direct density variables, are used as the design variables. In this work, we newly propose S-shape functions mapping the original density variables nonlinearly to new design variables. The main role of S-shape function is to push intermediate densities to either lower or upper bounds. In particular, this method works well with nonlinear mathematical programming methods. A method of feasible directions is chosen as a nonlinear mathematical programming method in order to show the effects of the S-shape scaling function on the solution convergence.

• 한국의류산업학회지
• /
• 제24권6호
• /
• pp.812-824
• /
• 2022

This study proposes to develop a 3D printed re-entrant(RE) strip by shape memory thermoplastic polyurethane that can be deformed and recovered by thermal stimulation. The most suitable 3D printing infill density condition and temperature condition during shape recovery for mechanical behavior were confirmed. As the poisson's ratio indicated, the higher the recovery temperature, the closer the poisson's ratio to zero and the better the auxetic properties. After recovery testing for five minutes, it appeared that the shape recovery ratio was the highest at 70℃. The temperature range when the shape recovery ratio appeared to be more than 90% was a recovery temperature of more than 50℃ and 60℃ when deformed under a constant load of 100 gf and 300 gf, respectively. This indicated that further deformation occurred after maximum recovery when recovered at a temperature of 80℃, which is above the glass transition temperature range. As for REstrip by infill density, a shape recovery properties of 100% was superior than 50%. Additionally, as the re-entrant structure exhibited a shape recovery ratio of more than 90%, and exhibited auxetic properties. It was confirmed that the infill density condition of 100% and the temperature condition of 70℃ are suitable for REstrips for applying the actuator.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.808-811
• /
• 2000

The product of stereolithography is consist of gathering the single strand. Therefore the accuracy of the shape is related to the linear shrinkage of the single strand. The resin temperature change affect on curing properties. This article will propose the interaction between material temperature and shape accuracy by resin temperature control. The main concern of this article is related to the improvement of end product's shape accuracy by the persuit for the filles curing criterion.

• 한국의류산업학회지
• /
• 제22권1호
• /
• pp.87-93
• /
• 2020

This study provide basic data to develop a dress form reflecting body shape characteristics by age and to produce a 3D body form in a virtual fitting program. A comparative analysis was conducted on the size, section shape, and slope of side shape of the modeling form by the sizing of the basic female avatar in CLO 3D, one of the 3D apparel CAD programs and the body form of women in their 20s-50s by body shape in the 6th Size Korea (2010). First, all the differences were formed similarly in the direct measurements between the 3D avatar and the body form were within 1 mm. Second, in a comparison of the section form of the avatar and body form in Size Korea, the avatar was formed in straight body shape and did not reflect a spinal curvature according to age. As a result of an examination of the items with a difference over 5° in the slope of side shape, there were angle differences in numerous body shapes in the angles of the side upper abdomen, side upper back, and side upper bust, and the avatar's bust shape was expressed more flatly compared to body form. It will be possible to produce an avatar that can adequately reflect body shape characteristics by adding detailed length and angle items by the region like waist back length and front length in producing the avatar reflecting body shape characteristics, instead of a standard body shape.

• Journal of Magnetics
• /
• 제17권1호
• /
• pp.1-5
• /
• 2012

The coercivity of a single 27 nm-spherical barium ferrite (S-BaFe) particle was simulated using three models: 1) Gibbs free energy (GFE), 2) Landau-Lifshitz-Gilbert (LLG), and 3) Stoner-Wohlfarth (S-W). Spherically and hexagonally shaped particles were used in the GFE and LLG simulations to investigate coercivity with the different shape anisotropies. The effect of shape was not included in the S-W model. It was found that the models using a spherical shape resulted in a coercivity higher than the models using the hexagonal shape with both shapes having the same diameter. The coercivity estimated with the S-W model was approximately the same as that for the spherical-shape models, which indicates that spherical shape has no significant effect on the particle's coercivity at nanoscale.

• 한국의류학회지
• /
• 제28권11호
• /
• pp.1426-1437
• /
• 2004

The study has an objective of providing the basic data for the bodice basic pattern that is highly appropriate after classifying the torso shapes of women in 60s. In order to classify the torso shape, 200 women in 60s that reside in Seoul were investigated for 52 tests. The factor analysis produced total of 6 factors. Factor 1 tended to be posture of upper part of torso and shape of shoulder. Factor 2 was an element of silhouette and Factor 3 was vertical size of lower part of torso and side silhouette. Factor 4 showed to be width and thickness of torso, Factor 5 was shape of neck, and Factor 6 appeared to be sagging of belly and buttocks. Therefore, it can be known that posture, silhouette, shape of neck and shoulder, sagging of belly and buttocks, and etc. are important factors for classification of the torso shape of women in 60s. Through a cluster analysis, each torso shape was classified into 4 types and each type showed information on size, shape, and posture clearly. Type 1 showed percentage of 24.2%, and values of height and weight showed to be average. Also, the body shape hardly had any curve with high shoulder at the Posture of upper body, and they had saggy stomach and buttocks. 43.5% of them were involved in Type 2 and they were short and overweighted. They were comparatively large in width compared to the height with no curves. Type 2 had the largest percentage and this can be said to be the special shape of women in 60s. People of Type 3 were short and overweighted just like Type 2 and all the sizes were similar to those of Type 2 or bigger. The posture is right posture and 21.7％ fall into this type and there is no body curve. This type is the shortest and most overweighted type, and it is a torso shape with right posture just like Type 4. Type 4 is a torso shape with tallest height and least weight. The percentage was the smallest(10.6％) and the width was smaller than any other type but the height was the tallest. The body curve is very clear and they have thin body but big buttocks so it can be said that the people of this type have the best silhouette. Type 2 that had the highest percentile is short and overweighted so it can be said that Type 2 is the representative torso shape of women in 60s.