• Archives of Pharmacal Research
• /
• 제17권6호
• /
• pp.428-433
• /
• 1994

The methabolism and phamacokinetics of a mixed disulfide S-(N, N-diethyldithiocarbamoyl)-N-acetyl-L-cysteine (AC-DDTC) were studied in rats. Two metabolites of AC-DDTC following iv and po administration were indentified in plasma and liver by HPLC and GC, namely N, N-diethyldithiocarbamate (DDTC) and the methyl ester of DDTC (Me-DDTC). AC-DDTC was very unstable in vivo and could not be detected neither in plasma nor in urine. Pharmacokinetic parameters of DDTC following intravenous administration of AC-DDTC (20 mg/kg) were calculated. DDTC has a low affinity to rat tissue and the body clearance was $9.0{\pm}3.4mkl/mim/kg$. The mean residence time (MRT) was $11.5{\pm}16.3 min$. After oral administration of 20 mg/kg AC-DDTC, maximal plasma concenttion ($C_{max}$) was $3.8{\pm}0.2 nmol/ml$ and the bioavailability was 7.04%. $C_{max}$ for DDTC at a dose of 120 mg/kg. AC-DDTC was $40.1{\pm}2.2 nmol/ml$. ART was $47.1{\pm}2.8min$.at a dose of 20 mg/kg and $110.5{\pm}6.0 min$ at 120 mg/kg.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.136-137
• /
• 2008

태양전지의 효율은 실리콘 자체의 특성에 의해서 결정 되거나 완성된 실리콘을 통해 태양전지를 제조하는 과정에서 Texturing, Coating 등을 통해 효율을 변화 시킬 수 있다. PC1D를 이용해 Texturing, Base Resistivity, Emitter Doping등을 조절해가며 고효율 태양전지를 위한 시뮬레이션을 하였다. Texture Angle이 $80^{\circ}$, Texture Depth가 2um, Base Resistivity가 0.2[${\Omega}{\cdot}cm$], Emitter Doping이 8*Exp(19)[$cm^{-3}$]일 경우 효율이 19.9%로 최적화 되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.308-309
• /
• 2012

One of the critical issues in the growth of multijunction solar cell is the formation of a highly doped Esaki interband tunnel diode which interconnects unit cells of different energy band gap. Small electrical and optical losses are the requirements of such tunnel diodes [1]. To satisfy these requirements, tens of nanometer thick gallium arsenide (GaAs) can be a proper candidate due to its high carrier concentration in low energy band gap. To obtain highly doped GaAs in molecular beam epitaxy, the temperatures of Si Knudsen cell (K-cell) for n-type GaAs and Be K-cell for p-type GaAs were controlled during GaAs epitaxial growth, and the growth rate is set to 1.75 A/s. As a result, the doping concentration of p-type and n-type GaAs increased up to $4.7{\times}10^{19}cm^{-3}$ and $6.2{\times}10^{18}cm^{-3}$, respectively. However, the obtained n-type doping concentration is not sufficient to form a properly operating tunnel diode which requires a doping concentration close to $1.0{\times}10^{19}cm^{-3}$ [2]. To enhance the n-type doping concentration, n-doped GaAs samples were grown with a lower growth rate ranging from 0.318 to 1.123 A/s at a Si K-cell temperature of $1,180^{\circ}C$. As shown in Fig. 1, the n-type doping concentration was increased to $7.7{\times}10^{18}cm^{-3}$ when the growth rate was decreased to 0.318 A/s. The p-type doping concentration also increased to $4.1{\times}10^{19}cm^{-3}$ with the decrease of growth rate to 0.318 A/s. Additionally, bulk resistance was also decreased in both the grown samples. However, a transmission line measurement performed on the n-type GaAs sample grown at the rate of 0.318 A/s showed an increased specific contact resistance of $6.62{\times}10^{-4}{\Omega}{\cdot}cm^{-2}$. This high value of contact resistance is not suitable for forming contacts and interfaces. The increased resistance is attributed to the excessively incorporated dopant during low growth rate. Further studies need to be carried out to evaluate the effect of excess dopants on the operation of tunnel diode.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.456-456
• /
• 2009

Boron doping on an n-type Si wafer is requisite process for IBC (Interdigitated Back Contact) solar cells. Fiber laser annealing is one of boron doping methods. For the boron doping, uniformly coated or deposited film is highly required. Plasma enhanced chemical vapor deposition (PECVD) method provides a uniform dopant film or layer which can facilitate doping. Because amorphous silicon layer absorption range for the wavelength of fiber laser does not match well for the direct annealing. In this study, to enhance thermal affection on the existing p-a-Si:H layer, a ${\mu}c$-Si:H intrinsic layer was deposited on the p-a-Si:H layer additionally by PECVD. To improve heat transfer rate to the amorphous silicon layer, and as heating both sides and protecting boron eliminating from the amorphous silicon layer. For p-a-Si:H layer with the ratio of $SiH_4$ : $B_2H_6$ : $H_2$ = 30 : 30 : 120, at $200^{\circ}C$, 50 W, 0.2 Torr for 30 minutes, and for ${\mu}c$-Si:H intrinsic layer, $SiH_4$ : $H_2$ = 10 : 300, at $200^{\circ}C$, 30 W, 0.5 Torr for 60 minutes, 2 cm $\times$ 2 cm size wafers were used. In consequence of comparing the results of lifetime measurement and sheet resistance relation, the laser condition set of 20 ~ 27 % of power, 150 ~ 160 kHz, 20 ~ 50 mm/s of marking speed, and $10\;{\sim}\;50 {\mu}m$ spacing with continuous wave mode of scanner lens showed the correlation between lifetime and sheet resistance as $100\;{\Omega}/sq$ and $11.8\;{\mu}s$ vs. $17\;{\Omega}/sq$ and $8.2\;{\mu}s$. Comparing to the singly deposited p-a-Si:H layer case, the additional ${\mu}c$-Si:H layer for doping resulted in no trade-offs, but showed slight improvement of both lifetime and sheet resistance, however sheet resistance might be confined by the additional intrinsic layer. This might come from the ineffective crystallization of amorphous silicon layer. For the additional layer case, lifetime and sheet resistance were measured as $84.8\;{\Omega}/sq$ and $11.09\;{\mu}s$ vs. $79.8\;{\Omega}/sq$ and $11.93\;{\mu}s$. The co-existence of $n^+$layeronthesamesurfaceandeliminating the laser damage should be taken into account for an IBC solar cell structure. Heavily doped uniform boron layer by fiber laser brings not only basic and essential conditions for the beginning step of IBC solar cell fabrication processes, but also the controllable doping concentration and depth that can be established according to the deposition conditions of layers.

• 한국재료학회지
• /
• 제13권12호
• /
• pp.846-849
• /
• 2003

Doping effect of various ions in Bi-layered ferroelectric $SrBi_2$$Nb_2$$O_{9}$ (SBN) ceramics was studied. Undoped SBN ceramic and SBN ceramics doped with $Ba^{2＋}$, $Pb^{2＋}$,$ Ca^{2＋}$ , $Bi^{3＋}$ , $La^{3＋}$ , $Ti^{4＋}$ , $Mo^{6＋}$ , and $W^{6＋}$ ions were made by a solid state reaction. Dielectric constants were measured with temperature. Ferroelectric transition temperature decreased with $Pb^{2＋}$ , $Ba^{2＋}$ , $La^{3＋}$ doping, but the transition temperature increased with $Ca^{2＋}$ , $Bi^{3＋}$ , $Ti^{4＋}$, $Mo^{6＋}$ , or$ W^{6＋}$ ionic doping. These results show that the ion size plays an important role in the ferroelectricity of SBN ceramic.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.322-322
• /
• 2010

For boron doping on n-type silicon wafer, around $1,000^{\circ}C$ doping temperature is required, because of the relatively low solubility of boron in a crystalline silicon comparing to the phosphorus case. Boron doping by fiber laser annealing and lamp furnace heat treatment were carried out for the uniformly deposited p-a-Si:H layer. Since the uniformly deposited p-a-Si:H layer by cluster is highly needed to be doped with high temperature heat treatment. Amorphous silicon layer absorption range for fiber laser did not match well to be directly annealed. To improve the annealing effect, we introduce additional lamp furnace heat treatment. For p-a-Si:H layer with the ratio of $SiH_4:B_2H_6:H_2$=30:30:120, at $200^{\circ}C$, 50 W power, 0.2 Torr for 30 min. $20\;mm\;{\times}\;20\;mm$ size fiber laser cut wafers were activated by Q-switched fiber laser (1,064 nm) with different sets of power levels and periods, and for the lamp furnace annealing, $980^{\circ}C$ for 30 min heat treatment were implemented. To make the sheet resistance expectable and uniform as important processes for the $p^+$ layer on a polished n-type silicon wafer of (100) plane, the Q-switched fiber laser used. In consequence of comparing the results of lifetime measurement and sheet resistance relation, the fiber laser treatment showed the trade-offs between the lifetime and the sheet resistance as $100\;{\omega}/sq.$ and $11.8\;{\mu}s$ vs. $17\;{\omega}/sq.$ and $8.2\;{\mu}s$. Diode level device was made to confirm the electrical properties of these experimental results by measuring C-V(-F), I-V(-T) characteristics. Uniform and expectable boron heavy doped layers by fiber laser and lamp furnace are not only basic and essential conditions for the n-type crystalline silicon solar cell fabrication processes, but also the controllable doping concentration and depth can be established according to the deposition conditions of layers.

• 한국정보통신학회논문지
• /
• 제20권4호
• /
• pp.805-810
• /
• 2016

본 논문에서는 비대칭 이중게이트 MOSFET의 채널 내 도핑농도에 대한 드레인 유도 장벽 감소 현상에 대하여 분석하고자한다. 드레인 유도 장벽 감소 현상은 드레인 전압에 의하여 소스 측 전위장벽이 낮아지는 효과로서 중요한 단채널 효과이다. 이를 분석하기 위하여 포아송방정식을 이용하여 해석학적 전위분포를 구하였으며 전위분포에 영향을 미치는 채널도핑 농도뿐만이 아니라 상하단 산화막 두께, 하단 게이트 전압 등에 대하여 드레인 유도 장벽 감소 현상을 관찰하였다. 결과적으로 드레인 유도 장벽 감소 현상은 채널도핑 농도에 따라 큰 변화를 나타냈다. 채널길이가 25 nm 이하로 감소하면 드레인 유도 장벽 감소 현상은 급격히 상승하며 채널도핑농도에도 영향을 받는 것으로 나타났다. 산화막 두께가 증가할수록 도핑농도에 따른 드레인유도장벽감소 현상의 변화가 증가하는 것을 알 수 있었다. 채널도핑 농도에 관계없이 일정한 DIBL을 유지하기 위하여 상단과 하단의 게이트 산화막 두께가 반비례하는 것을 알 수 있었다. 또한 하단게이트 전압은 그 크기에 따라 도핑농도의 영향이 변화하고 있다는 것을 알 수 있었다.

• 대한화학회지
• /
• 제35권6호
• /
• pp.659-666
• /
• 1991

질소를 함유한 흥분제와 마약성 진통제 18종류의 약물들을 gas chromatography-nitrogen phosphorus detector(GC-NPD)를 사용하여 human urine으로부터 동시에 신속하게 분석할 수 있는 최적조건을 찾기 위하여 pH 변화와 추출용매 변화에 따른 회수율을 조사하였다. pH 8.5에서 에테르를 추출용매로 사용하였을 때 가장 적은 방해영향과 가장 좋은 회수율을 나타냈다. NPD에 대한 각 약물들의 상대 감응인자를 구하였고, 이 상대감응인자는 약물이 가지고 있는 질소원자의 갯수가 증가할수록 작은 값을 나타냈다. 생체시료 중의 약물들을 신속하게 검정하기 위하여 내부표준물질인 diphenylamine에 대한 relative retention time(RRT)을 작성하였다. 상대머무름 시간은 0.1% 이하의 정밀도를 나타냈다.

• 한국정보통신학회논문지
• /
• 제18권9호
• /
• pp.2183-2188
• /
• 2014

본 연구에서는 비대칭 이중게이트(double gate; DG) MOSFET의 채널 도핑농도 변화에 따른 문턱전압이동 현상에 대하여 분석하였다. 비대칭 DGMOSFET는 일반적으로 저 농도로 채널을 도핑하여 완전결핍상태로 동작하도록 제작한다. 불순물산란의 감소에 의한 고속 동작이 가능하므로 고주파소자에 응용할 수 있다는 장점이 있다. 미세소자에서 필연적으로 발생하고 있는 단채널 효과 중 문턱전압이동현상이 비대칭 DGMOSFET의 채널도핑농도의 변화에 따라 관찰하고자 한다. 문턱전압을 구하기 위하여 해석학적 전위분포를 포아송방정식으로부터 급수형태로 유도하였다. 채널길이와 두께, 산화막 두께 및 도핑분포함수의 변화 등을 파라미터로 하여 도핑농도에 따라 문턱전압의 이동현상을 관찰하였다. 결과적으로 도핑농도가 증가하면 문턱전압이 증가하였으며 채널길이가 감소하면 문턱전압이 크게 감소하였다. 또한 채널두께와 하단게이트 전압이 감소하면 문턱전압이 크게 증가하는 것을 알 수 있었다. 마지막으로 산화막 두께가 감소하면 문턱전압이 증가하는 것을 알 수 있었다.

• 대한한의학회지
• /
• 제40권3호
• /
• pp.139-176
• /
• 2019

Objectives: This study aims to review the herbal medicines containing substances banned by World Anti-Doping Agency(WADA), and to consider criteria for the using of herbal medicines. Methods: Using foreign(Pubmed, Cochrane, Embase, Google Scholar, WANFANG, CiNii) and domestic databases (NDSL, OASIS, RISS), we analyzed the content and pharmacokinetics of the prohibited substances in herbal medicines. Results: Herbal medicines containing the prohibited substances proposed in Korea, China, and Japan are Ephedrae Herba, Cannabis Semen, Strychni Semen, Strychni Ignatii Semen, Pinelliae Tuber, Rhizoma Pinelliae, Chelidonii Herba, Papaveris Fructus Deseminatus, Liriopis Tuber, Rehmanniae Radix Recens, Cistanchis Herba, Ponciri Fructus Immaturus, Aurantii Fructus Immaturus, Moschus, Testudinis Plastrum, Otariae Testis et Penis, and Hominis Placenta. Of these, when using Ephedrae Herba, Cannabis Semen, Strychni Semen, Moschus, Strychni Ignatii Semen, and Otariae Testis et Penis, caution is needed in relation to the doping test. Other herbal medicines are considered safe for the doping test. In addition, by analyzing data related to higenamine added to the WADA's prohibited list of doping since 2017, we don't recommend using Nelumbinis Plumula. And in the case of the other herbal medicines containing higenamine, it is considered that care should be taken in doping test depending on the amount of usage. Conclusions: As a result of analyzing the herbal medicines which are in prohibited list about doping, we were able to know the criteria and precautions to use when prescribing the herbal medicines. Further research will be needed about common used herbal medicines and the amount of detection depending on extraction and boiling method.