• 조명전기설비학회논문지
• /
• 제27권4호
• /
• pp.31-40
• /
• 2013

This paper proposes a performance improvement of synchronous generator using exciter control with field coils parameter estimation technique. In general, the generator excitation system controller uses the PID controller. When the Field winding impedance changed, the PID gains must be changed. General method is difficult to apply varying capacity of the synchronous generator. The proposed control method determine automatically measure the internal impedance of the synchronous generator's exciter and configure the controller. This method can be applied regardless of the generator capacity. So it is possible to apply a variety of synchronous generator systems. The validity of the proposed algorithm is verified by simulations and experiments.

• 통합자연과학논문집
• /
• 제13권3호
• /
• pp.92-96
• /
• 2020

Taguchi's robust parameter design is an approach to reduce the performance variation of quality characteristics in products and processes. In robust design, the signal-to-noise ratio (SN ratio) was used to find the optimum condition to minimize the variation of quality characteristics as much as possible and bring the average of quality characteristics closer to the target value. In this paper, we propose a simultaneous optimization method based on a linear model of the SN ratio as a method to find the optimal condition of the control factor in case of multi-characteristics. In addition, the proposed method and the existing method were compared and studied by taking actual cases.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.199-202
• /
• 1996

In this paper, we used the maximum likelihood method for 2-point aerodynamic model to determine the parameters of the ChangGong-91. Since the estimation from the flight test of real aircraft is the most reliable, we performed the flight test of ChangGong-91 to get the parameters such as velocity, height, 3 axis acceleration, 3 axis angular rate, pitch angle, angle of attack, temperature and so on. We recorded the flight test data in S-VHS tapes and stored them to personal computer using A/D(analog to digital) converter. Flight test was done in stall motion, and the acquired data was be processed with parameter identification method.

• 대한전자공학회논문지
• /
• 제25권4호
• /
• pp.430-436
• /
• 1988

LSF(Line Spectral Frequency) derived from LPC has known as a very useful transmission parameter of speech signals, for it has a good linear interpolation characteristics and a low spectrum distortion at low bit rates coding. This paper presents that it is possible to extract directly the formant frequencies of speech signals from LSF parameter without application of FFT algorithm by comparing the distribution of LSF parameter with the frequency distribution of analysis filter. This paper suggests the advanced algorithm that results in improving the speed of convergence at analytic solution method. Also, for the flexibility of parameters, the process that transforms from LSF to LPC is presented.

• Fibers and Polymers
• /
• 제7권1호
• /
• pp.66-69
• /
• 2006

Spandex fibers have superior stretch and elastic recovery ability. Composite yarns containing spandex are frequently used to manufacture elastic textile products and accessories. We have developed a composite yarn spinning system that produces different kinds of composite yarns containing spandex on a modified open-end rotor spinning frame. By changing the twisting parameter of composite yarns, we studied the structure and properties of rotor-spun composite yarns with spandex. The results indicate that the twisting parameter has great influence on the structure and properties of rotor-spun composite yarns with spandex. The linear density of spandex filament has influence on the properties of composite yarns too. In comparison with normal rotor-spun yarn, the appearance of composite yarns is clearer, the structure is much tighter, and the properties are improved.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(2)
• /
• pp.196-199
• /
• 2000

In this paper has studied an enhanced usage parameter control algorithm, which is one of the preventive traffic control method in ATM networks. The proposed algorithm is based on the CLP(Cell Loss Priority) bit in the ATM cell header. This algorithm can eliminate the measurement phasing problem in cell conformance testing in ATM networks. The proposed algorithm can minimize the cell loss ratio of high priority cell(CLP = 0) and resolve the burstiness of eel]s which may be generated in the multiplexing and demultiplexing procedure. For the performance evaluation, we have simulated the proposed algorithm with discrete time input traffic model and the results show that the performance of the proposed algorithm is better than that of ITU-T usage parameter control algorithm.

• 전자공학회논문지A
• /
• 제33A권5호
• /
• pp.172-179
• /
• 1996

In the paper, QCELP (qualcomm code excited linear predictive), CDMA (code division multiple access)'s vocoder algorithm, was analyzed. And then, a ptich parameter seaarch architecture for 16-bit programmable DSP(digital signal processor) for QCELP was designed. Because we speed up the parameter search through high speed DSP using two MACs, we can satisfy speech codec specifiction for the digital celluar. Also, we implemented in FIFO(first-in first-out) memory using register file to increase the access time of data. This DSP was designed using COMPASS, ASIC design tool, by top-down design methodology. Therefore, it is possible to cope with rapid change at mobile communication market.

• 전자공학회논문지D
• /
• 제34D권12호
• /
• pp.54-61
• /
• 1997

An accurate extraction technique is developed to determine full euqivalent circuit parameters of Si MOSFETs using 1 set of measured S-parametes without complicated optimization process. This technique is based on the use of anlytic Z-parameters experessions for resistances and inductances and the Y-parameter ones for ntrinsic parameters. This accuracy is proved over the wide range of gate voltage by observing good agreement between measured and fitted Z-parameter equations and frequency-independent response of the extracted intrinsic parameters. Using this technique, gate voltage-dependencies of model parameters are obained in the saturation region and these results show the similar behavior to the short-channel effects expected from the device theory.

• 소음진동
• /
• 제9권3호
• /
• pp.570-576
• /
• 1999

This paper presents numerical and experimental results of modal parameter identification in a generator stator frame for 500 MW fossil power plants. A commercial finite element analysis S/W was employed for modal analysis. The generator is excited by alternating electromagnetic forces, mainly of 120 Hz in 60 Hz machines, due to magnetic field and electric current in windings. It is necessary to verify that the stator frame has adequate frequency margin from the excitation frequency to avoid possible resonance when operating. Thus, frequency margin required for the stator frame is established using the numerical and experimental results. The results show that the stator frame meets the frequency-margin requirements. Also, results of modal analysis for design modification in order to reduce weights of the stator frame without deteriorating vibration characteristics are presented.

• 한국정밀공학회지
• /
• 제19권4호
• /
• pp.87-92
• /
• 2002

By using the signal error test, model structure of total antilock braking system consisting of electromagnetic system and hydraulic system is determined as 9th order system. For determining parameters of the ABS, using time discrete model of parametric method, parameters in time discrete model are searched by least square method. By bilinear transform, we have found the model of ABS in s domain. Afterward, experimental output data is compared with simulated output data by MATLAB haying identified parameter. As the result, experimental data is agreed with simulated data very well.