• Applied Biological Chemistry
• /
• v.10
• /
• pp.15-21
• /
• 1968

In order to fractionate the rice protein employing paper electrophoresis, 9 subjects of Korean rice and one Indica type, Pin Galw 50 were examined, the results were as follows. 1. Polished rice protein was separated into albumin, globulin, prolamine, and oryzenin. The amount of these fractions was determined by Kjeldahl method showing respectively 0.26%, 0.65%, 0.41%, and 5.01% in average. Albumin was extracted with deionized water, globulin with 10% NaCl, prolamine with 70% ethanol, and oryzenin with 0.05N-NaOH. 2. Albumin was extracted with deionized water and dialyzed by a cellophan tube. The supernatant was submitted to paper electrophoresis using phosphate buffer (pH 7.6, ${\mu}$ 0.18). Albumin was identified as monocomponent in all of 10 varieties under study. Globulin was extracted and dialyzed to remove the albumin. The precipitates were resolved in 10% saline solution and examined by paper electrophoresis. The globulin consists of two components in phosphate buffer(pH 7.6, ${\mu}$ 0.18) Any subject, regardless the origin, appears to contain globulin I and globulin II. Prolamine was extracted with 70% ethanol, dialayzed against deionized water, resolved with ethanol, and analyzed by Paper electrophoresis. It was proved as one component in the 70% alcoholic buffer(pH 9.0, ${\mu}$=0.0095). On the contrary, paper electrophoresis with oryzenin demonstrated two or three components in Sorensen's buffer(pH 13.0, ${\mu}$ 0.11). Yookoo 132, Dungpan 5, Kwansan, and Jaekun contain oryzenin I, oryzenin II, and oryzenin III. On the other hand, Paldal, Jinheung, Sukwang, Eunbangzu, Damakum, and Pin Galw 56 contain only oryzenin II, and oryzenin III. On the basis of these analyses a discussion of the differences between the protein fractions of 10 varieties was presented. 3. Globulin I varied from 0.22% to 0.46% (aver. 0.35%) in the amount, globulin II from 0.21 to 0.44%(aver. 0.32%), oryzenin I from 0.17% to 0.44%(aver. 0.3%), oryzenin II from 1.59% to 2.88%(aver. 2.23%), and oryzenin III from 2.02% to 3.57%(aver. 2.66%).

• Economic and Environmental Geology
• /
• v.42 no.6
• /
• pp.575-589
• /
• 2009

Groundwater has been extracted for irrigation in Sacheon-Hadong area, which is close to the South Sea. We analyzed chemical components of groundwater to examine the effects of seawater intrusion and agricultural activities in the study area. Most groundwater samples displayed the Na/Cl concentration ratios similar to that of seawater (0.55) with an increasing tendency of electrical conductivity ($227-7,910\;{\mu}S/cm$) towards the coast. In addition, statistical interpretation of the cumulative frequency curves of Cl and $HCO_3$ showed that 30.1% of the groundwater samples were highly affected by seawater intrusion. Groundwaters in the study area mostly belonged to the Ca-Cl and Na-Cl type, demonstrating that they were highly influenced by seawater intrusion and cation exchange. The result of oxygen-hydrogen isotope analysis demonstrated slightly higher $\delta^{18}O$ ((-8.53)-(-6.13)‰) and ${\delta}D$ ((-58.7)-(-43.7)‰) comparing to mean oxygen-hydrogen isotope ratios in Korea. As a result of nitrogen isotope analysis, the $\delta^{15}N-NO_3$ values ((-0.5)-(19.1)‰) indicate two major sources of nitrate pollution (organic nitrogen in soil and animal and human wastes) and mixed source of the two. However, denitrification may partly contribute as a source of nitrogen. According to factor analysis, four factors were identified among which factor 1 with an eigenvalue of 6.21 reflected the influence of seawater intrusion. Cluster analysis indicated the classification of groundwater into fresh, saline, and mixed ones.

• Analytical Science and Technology
• /
• v.25 no.3
• /
• pp.171-177
• /
• 2012

A determination method of aromatic amino acids such as trytophan (Trp), tyrosine (Tyr), and phenylalanine (Phe) using luminol-$H_2O_2$-Cu(II) system has been presented. In the presence of an aromatic amino acid, the enhanced chemiluminescence (CL) intensity of luminol-$H_2O_2$-Cu(II) system was obtained by forming a complex between Cu(II) and the amino acid. Based on the above phenomenon, a sensitive and fast determination of three aromatic amino acids was performed using the CL method in batch-type detection system. To optimize determination conditions, the kinetic influence of an aromatic amino acid on the luminol-$H_2O_2$-Cu(II) system and the effects of $H_2O_2$ and Cu(II) concentration, pH, and buffers were investigated. Under the optimized conditions, the calibration curve was linear over the range from $1.0{\times}10^{-6}$ to $2.0{\times}10^{-5}\;M$ for Trp, $1.0{\times}10^{-6}$ to $2.0{\times}10^{-5}\;M$ for Try, and $2.0{\times}10^{-6}$ to $2.0{\times}10^{-5}\;M$ for Phe, respectively. In this range, reproducibility (RSD, n = 4) of Trp, Try, and Phe were 3.21%, 2.64%, and 2.48%, respectively. The limit of detection ($3{\sigma}/s$) was calculated to be $6.8{\times}10^{-7}\;M$ for Trp, $5.7{\times}10^{-7}\;M$ for Try, and $9.6{\times}10^{-7}\;M$ for Phe.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.17 no.2
• /
• pp.93-103
• /
• 1981

It is well-known that nowadays heat resisting and anti-corrosive materials have been widely used as the components materials of gas turbines, nuclear power plants and engines etc. In the fields of machine production industry. And materials for engine components, like as the exhaust valve of internal combustion engine, have been required to operate under the high temperature range of $700^{\circ}C$-$800^{\circ}C$ and high pressured gas with repeated mechanical load for the high performance of engines. For these components, friction welding for bonding of dissimilar steels can be applied for in order to obtain process shortening, production cost reduction and excellent bonding quality. And age hardening recently has been noticed to the heat resisting materials for further strengthening of high temperature strength, especially high temperature fatigue strength. However, it is difficult to find out any report concerning the effects of age hardening for strengthening high temperature fatigue strength to the Friction welded heat resisting and anti-corrosive materials. In this study the experiment was carried out as the high temperature rotary bending fatigue testing under the condition of $700^{\circ}C$ high temperature to the friction welded domestic heat resisting steels, SUH3-SUS303, which were 10hr., 100hr. aging heat treated at $700^{\circ}C$ after solution treatment 1hr. at $1, 060^{\circ}C$ for the purpose of observing the effects of the high temperature fatigue strength and fatigue fracture behaviors as well as with various mechanical properties of welded joints. The results obtained are summarized as follows: 1) Through mechanical tests and micro-structural examinations, the determined optimum welding conditions, rotating speed 2420 rpm, heating pressure 8kg/mm super(2), upsetting pressure 22kg/mm super(2), the amount of total upset 7mm (heating time 3 sec and upsetting time 2 sec) were satisfied. 2) The solution treated material SUH 3, SUS 303, have the highest inclination gradient on S-N curve due to the high temperature fatigue testing for long time at $700^{\circ}C$. 3) The optimum aging time of friction welded SUH3-SUS 303, has been recognized near the 10hr. at $700^{\circ}C$ after the solution treatment of 1hr. at $1, 060^{\circ}C$. 4) The high temperature fatigue limits of aging treated materials were compared with those of raw material according to the extender of aging time, on 10hr. aging, fatigue limits were increased by SUH 3 75.4%, SUS 303 28.5%, friction welded joints SUH 3-SUS 303 44.2% and 100hr. aging the rates were 64.9%, 30.4% and 36.6% respectively. 5) The fatigue fractures occurred at the side of the base matal SUS303 of the friction welded joints SUH 3-SUS 303 and it is difficult to find out fractures at the friction welding interfaces. 6) The cracking mode of SUS 303, SUH 3-303 is intergranular in any case, but SUH 3 is fractured by transgranular cracking.

• The Journal of Engineering Geology
• /
• v.31 no.4
• /
• pp.603-620
• /
• 2021

A land nodal seismic system was employed to acquire seismic reflection data using stand-alone cable-free receivers in a land-river area. Acquiring reliable data using this technology is very cost effective, as it avoids topographic problems in the deployment and collection of receivers. The land nodal airgun system deployed on the mouth of the Hyungsan River (in Pohang, Gyeongsangbuk Province) used airgun sources in the river and receivers on the riverbank, with subparallel source and receiver lines, approximately 120 m-spaced. Seismic data collected on the riverbank are characterized by a low signal-to-noise (S/N) and inconsistent reflection events. Most of the events are represented by hyperbola in the field records, including direct waves, guided waves, air waves, and Scholte surface waves, in contrast to the straight lines in the data collected conventionally where source and receiver lines are coincident. The processing strategy included enhancing the signal behind the low-frequency large-amplitude noise with a cascaded application of bandpass and f-k filters for the attenuation of air waves. Static time delays caused by the cross-offset distance between sources and receivers are corrected, with a focus on mapping the shallow reflections obscured by guided wave and air wave noise. A new time-distance equation and curve for direct and air waves are suggested for the correction of the static time delay caused by the cross-offset between source and receiver. Investigation of the minimum cross-offset gathers shows well-aligned shallow reflections around 200 ms after time-shift correction. This time-delay static correction based on the direct wave is found essential to improving the data from parallel source and receiver lines. Data acquisition and processing strategies developed in this study for land nodal airgun seismic systems will be readily applicable to seismic data from land-sea areas when high-resolution signal data becomes available in the future for investigation of shallow gas reservoirs, faults, and engineering designs for the development of coastal areas.

• Korean Journal of Psychosomatic Medicine
• /
• v.30 no.2
• /
• pp.155-164
• /
• 2022

Objectives : A growing body of evidence links type 2 diabetes (T2D) with a neurodegenerative disease (ND) such as Alzheimer's disease and Parkinson's disease. The purpose of this study is to investigate the relationship between NDs and the development of T2D by comparing the incidence of T2D in a group of various NDs (ND group) and control group. Methods : A population-based 10-year follow-up study was conducted using the Korean National Health Information Database for 2002-2015. We used a retrospective cohort study design to investigate the association of ND with T2D occurrence. The study population included ND (n=8,814) and control (n=37,970) groups, all aged 60 years or over. The Kaplan-Meier method was used to estimate the risk of developing T2D as a function of time. Cox proportional hazards regression models were used to evaluate the relationship between ND and T2D. Results : T2D was developed in a significantly higher percentage of patients in the ND group (53.6%) than in the control group (44.7%). The ND group increased the risk of T2D (HR, 1.43; 95% CI, 1.38-1.47). About one-third of patients in both groups were additionally diagnosed with another ND before the occurrence of T2D during a 10-year follow-up period. When compared to those who did not have another ND during the follow-up period, the incidence of T2D in those who were additionally diagnosed with another ND was higher in both the ND and control groups. Conclusions : The ND group had about 1.4 times higher risk of developing T2D than the control group. Our results showed a positive association between ND and T2D.

• Applied Biological Chemistry
• /
• v.8
• /
• pp.29-37
• /
• 1967

Citrus fruits of ten varieties grown in Chaeju island and a few other fruits for the comparison were analyzed to determined the contents of crude fat, crude fiber, total carbohydrates, macroelements and ash. Acids and sugars in fruit juices were also determined and the characteristic of neutralization of fruit juices were investigated. 1. The per cent of edible part of citrus fruits having the range of 48.5(Daingwoochi) to 72(Onju) were lower than that of other fruits. It was lower by about 8 per cent than that of the same variety produced in U.S.A. It was shown that the amount of rind per fruit might be increased in the citrus fruit grown in the low annual temperature. 2. The content of crude protein were around 1% and higher than other's. The contents of crude fat were below 0.1% in three varieties and over 0.1 in others. The contents of crude fiber were between 0.3 to 0.8% and the fruits with the high content of crude protein were inclined to have the high content of crude fiber and it was also shown that the low annual temperature was inclined to increase the amount of crude fiber per fruit. 3. The amount of total acid were from 19.5 m.e per 100 g of fresh fruit in Byongkyul to 44.2 m.e in Daingwoochi. The high percentage of titrable acid was over 90 in two sour varieties, Daingwoochi and Hakyul having pH below 3 and the high content of total acid. These two varieties were above 10 in the ratio of total acid in the edible part to the total acid in the rind(total acid in edible part/total acid in the rind). The content of combined acid was lower than that of titrable acid in the edible part and vice versa in the rind. 4. Navel was highest as 12.82% in the total sugar content and the lowest content was 4.9% of Hakyul. The contents of reducing sugar in the citrus fruits were about half of that in other fruits. The ratio of total sugar to titrable acid (sugar/acid: the grade of sweet taste) were lower than foreign products . 5. From the titration curves of fruit juices the characteristic of neutralization of juices could be grouped in three types, and other values, that is, pH, the content of total acid, the percentage of combined acid, the ratio of total acids in edible part and rind, the content of sugar, and the grade of sweet taste were also devided into the same three categories. 6. The contents of macroelements were different along to the each part of fruit. The content, in the seed were high and the ones in the rind were low. The contents of each element were in the order of $K_2O>N>P_2O_5{\gtrless}CaO{\gtrless}MgO$ in the edible part, $K_2O>N>CaO>P_2O_5{\gtrless}MgO$ in the rind, $N>K_2O>P_2O_5>CaO>MgO$ in the seed. The content of potassium was especially high in Marumeru and Hakyul and the content of calcium in citrus fruit was higher than others.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.1
• /
• pp.21-29
• /
• 2016

We mix food waste leachate and sewage sludge by the proportion of 1:9, 3:7 and 5:5. It turns out that they produced 233, 298 and 344 $CH_4{\cdot}mL/g{\cdot}VS$ of methane gas. The result suggests that as the mixing rate of food waste leachate rises, the methane gas productions increases as well. And more methane gas is made when co-digesting sewage sludge and food waste leachate based on the mixing ratio, rather than digesting only sewage sludge alone. Modified Gompertz and Exponential Model describe the BMP test results that show how methane gas are produced from organic waste. According to the test, higher the mixing rate of food waste leachate is, higher the methane gas productions is. The mixing ratio of food waste leachate that produces the largest volume of methane gas is 3:7. Modified Gompertz model and Exponential model describe the test results very well. The correlation values($R^2$) that show how the results of model prediction and experiment are close is 0.92 to 0.98.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.3
• /
• pp.122-126
• /
• 2003

In this study, $Zn_{0.86}Mn_{0.14}$Te epilayer of 0.7 $\mu\textrm{m}$-thickness was grown on GaAs(100) substrate by using hot wallepitaxy. GaAs(100) substrate was removed from $Zn_{0.86}Mn_{0.14}$Teepilayer by the selective etching solution. The crystal structure and the lattice constant of only Z $n_{0.86}$ M $n_{0.14}$Te epilayer were investigated to be zincblende and 6.140 $\AA$ from X-ray diffraction pattern, respectively. Mn composition x of $Zn_{1-x}Mn_x$Te epilayer was found to be 0.14 using this lattice constant and Vegard's law. The crystal quality of the epilayer was confirmed to be very good due to 256 arcsec-full-width at half-maximum of the double crystal rocking curve. The absorption spectra from the transmission ones were obtained to measure the band gap energy of $Zn_{0.86}Mn_{0.14}$Te epilayer from 300 K to 10 K. With the decreasing temperature,. strong absorption regions in the absorption spectra were shifted to higher energy side and the absorption peak meaning the free exciton formation appeared near the absorption edge. The band gap energy values of $Zn_{0.86}Mn_{0.14}$Te epilayer at 0 K and 300 K were found to be almost 2.4947 eV and 2.330 eV from the temperature dependence of the free exciton peak position energy of $Zn_{0.86}Mn_{0.14}$Te epilayer, respectively. The free exciton peak position energy of $Zn_{0.86}Mn_{0.14}$Te epilayer without GaAs substrate was larger 15.4 meV than photoluminescence peak position energy at 10 K. This energy difference between two peaks was analysed to be Stokes shift.

• Nuclear Medicine and Molecular Imaging
• /
• v.43 no.1
• /
• pp.60-71
• /
• 2009

Purpose: We assessed the absorbed dose to the tumor ($Dose_{tumor}$) by using pretreatment FDG-PET and whole-body (WB) planar images in repeated radioimmunotherapy (RIT) with $^{131}I$ rituximab for NHL. Materials and Methods: Patients with NHL (n=4) were administered a therapeutic dose of $^{131}I$ rituximab. Serial WB planar images alter RIT were acquired and overlaid to the coronal maximum intensity projection (MIP) PET image before RIT. On registered MIP PET and WB planar images, 2D-ROls were drawn on the region of tumor (n=7) and left medial thigh as background, and $Dose_{tumor}$ was calculated. The correlation between $Dose_{tumor}$ and the CT-based tumor volume change alter RIT was analyzed. The differences of $Dose_{tumor}$ and the tumor volume change according to the number of RIT were also assessed. Results: The values of absorbed dose were $397.7{\pm}646.2cGy$ ($53.0{\sim}2853.0cGy$). The values of CT-based tumor volume were $11.3{\pm}9.1\;cc$ ($2.9{\sim}34.2cc$), and the % changes of tumor volume before and alter RIT were $-29.8{\pm}44.3%$ ($-100.0%{\sim}+42.5%$), respectively. $Dose_{tumor}$ and the tumor volume change did not show the linear relationship (p>0.05). $Dose_{tumor}$ and the tumor volume change did not correlate with the number of repeated administration (p>0.05). Conclusion: We could determine the position and contour of viable tumor by MIP PET image. And, registration of PET and gamma camera images was possible to estimate the quantitative values of absorbed dose to tumor.