• Journal of Korean Society of Transportation
• /
• v.25 no.4
• /
• pp.21-32
• /
• 2007

The households to be surveyed are usually huge number at the level of a city or metropolitan survey, not to mention a nationwide travel survey. Therefore, household travel surveys to figure out true origin-destination (O/D) trip patterns (population O/D) are conducted through a sampling method rather than by surveying all of the population in the system. Therefore, the population O/D pattern can only be estimated by expanding the sampled O/D patterns to the population. It is very difficult to avoid the errors involved in the process of sampling, surveying and expanding O/D data. In order to minimize such errors while estimating the true O/D patterns of the population, the validation and adjustment process should employed by doing a comparison between the expanded sample O/D data and observed link traffic volumes. This study suggests a method of validation and adjustment of the expanded sample O/D data by comparing observed link volumes at several screenlines. The study also suggests a practical technique to modify O/D pairs which are excluded in the screenline validation process by comparing observed traffic volume with the results of traffic assignment analysis. An empirical study was also conducted as an example applying the suggested methods of validation and adjustment with Korea's nationwide O/D data and highway network.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.2
• /
• pp.109-116
• /
• 2004

This paper deals with data association using 3 sets of passive linear array sonars (PUS) geometrically positioned in a Y-shaped configuration, but fixed in an underwater environment. The data association problem is directly transformed into a 3-D assignment problem, which is known to be NP-hard. For generic passive sensors, it can be sotted using conventional algorithms, while it in PLAS becomes a formidable task due to the presence of bearing ambiguity. In particular, we proposed data association method robust to bearing measurements errors by incorporating frequency information and analyze a region of ghost problem by geometrical relation PUS and target. We analyzed the effectiveness of the proposed method by representative simulation in multi-target.

• Korean Journal of Computational Design and Engineering
• /
• v.12 no.4
• /
• pp.283-297
• /
• 2007

Seamless data integration in the CAx chain of the CAD/CAPP/CAM/CNC has been achieved to a high degree, but research concerning the transfer of data from conceptual sketches to a CAD system should be carried out further. This paper presents a method for reconstructing a 3D model from a freehand sketch. Sketch-based modeling research can be classified into gestural modeling methods and reconstructional modeling methods. This research involves the reconstructional modeling method. Here, Mitani's seminal work, designed for box-shaped 3D model using a predefined template, is improved by leveraging a relational template and specialized for automotive design. Matching between edge graphs of the relational template and the sketch is formulated and solved as the assignment problem using the feature vectors of the edges. Including the stroke preprocessing method required to generate an edge graph from a sketch, necessary procedures and relevant techniques for implementing the template-based modeling method are described. Examples from a working implementation are given.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.11
• /
• pp.5253-5270
• /
• 2016

With device-to-device (D2D) communications, an inactive user terminal can be utilized as a relay node to support multi-hop communication so that connective experience of the cell-edge user as well as the capacity of the whole system can be significantly improved. In this paper, we investigate the spectrum sharing for a cooperative relay assisted D2D communication underlying a cellular network. We formulate a joint relay selection and channel assignment problem to maximize the throughput of the system while guaranteeing the quality of service (QoS) requirements of cellular users (CUs) and D2D users (DUs). By exploiting coalition formation game theory, we propose two algorithms to solve the problem. The first algorithm is designed based on merge and split rules while the second one is developed based on single user's movement. Both of them are proved to be stable and convergent. Simulation results are presented to show the effectiveness of the proposed algorithms.

• Journal of Aquaculture
• /
• v.15 no.3
• /
• pp.139-143
• /
• 2002

Saringosterols have been isolated from the sponge Penares incrustans. The structure of these compounds have been determined by extensive 2-D NMR experiments such as $ ^1 H$ COSY, HMQC, and HMBC and by comparison with published data. Assignment for carbons of saringosterols for the first time has been done.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.1
• /
• pp.11-16
• /
• 1996

The purpose of this paper is to present a summary of assignment design values according to domestic softwood structural lumber grading rules. Allowable stresses for visually graded lumber were determined from basic data on small. clear specimens. The data corrected for variability such as natural defects and other factors. The procedure adopted by Japan was used for assigning allowable design values. Strength ratios in relation to each defect were taken from ASTM D 245-81. Korean pine(Pinus koraiensis S. et Z.), Korean red pine(Pinus densiflora S. et Z.), Japanese larch(Larix leptolepis Gordon) and Needle fir(Abies holophylla Max) were applied to this study. The calculated allowable stresses were same in Korean pine and Korean red pine. These values were highest in Japanese larch lowest in Needle fir. So, it is desirable for these species to be classified into different catagories Species Group. However, accurate comparison in design values on lumber grading rules among U.S., Japan and Korea was somewhat difficult. And full scale testing will be necessary for accurate determination of the correction factors to setting up design values.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.5
• /
• pp.239-247
• /
• 2013

In network based on multi-interface, there are needed channel assignment strategy that reduce interference and improve bandwidth efficiency by assigning each interface to available channels in order to utilize effectively multiple wireless interfaces on each node. MCS protocol had been proposed, which improve capacity and throughput of network by using hybrid assignment. MCS uses as the criterion to assign channel the number of node that use the same channel in contention area. but there have an problem that this information exactly does not reflect actually offered channel load. in this paper, we proposes CAMCS protocol to assign channel by that the channel busy degree to indicate the occupancy rate of channel by nodes as well as the number of nodes that use the same channel in inference area is used as criterion for estimation channel load, and conform performance improvement effect by simulation.

• Progress in Medical Physics
• /
• v.19 no.4
• /
• pp.241-246
• /
• 2008

Patient's respiration can have an effect on movement of tumor range and peripheral organs. Therefore, the respiratory signal was acquired by relation between external markers and movement of patient's abdomen during radiational therapy in order to minimize the effect of respiration. Based on this technique, many studies of rational therapy to irradiate at particular part of stable respiratory signals have executed and they have been clinically applied. Nevertheless, the phase-based method is preferred to the amplitude-based method for the rational therapy related to respiration. Because stabilization of the respiratory signal are limited. In this study, a in-house respiratory signal analysis program was developed for the phase reassignment and the analysis of the irregular respiratory signals. Various irregular respiratory patterns was obtained from clinical experimental volunteers. After then, the in-house program analyzed the factors affecting to phase assignment which is directly related to irradiated sector. Subsequently, accuracy of phase assignment was improved with removement of irregular signals by self-developed algorithm. This study is considered to be useful for not only image reconstruction and elevation of irradiating accuracy through phase assignment of RPM system but also analysis of respiratory signals. Moreover, development of 4D CT image is planed with phantom researches or clinical experiments based on this program.

• Rapid Communication in Photoscience
• /
• v.4 no.3
• /
• pp.63-66
• /
• 2015

When the molecule in the excited state is subject to prompt predissociation, it is quite nontrivial to obtain vibrational structure of the excited state in general. This applies to the case of photochemistry of dimethylamine (DMA:$(CH_3)_2NH$). When DMA is excited to its first electronically excited state ($S_1$), the N-H bond dissociation occurs promptly. Therefore, $S_1$ vibronic bands are homogeneously broadened to give extremely small ionization cross sections and heavily-congested spectral features, making infeasible any reasonable spectral assignment. Here, we demonstrate that the predissociation rate of the excited state could be significantly reduced by the NH/ND substitution to give the much better-resolved $S_1$ spectral feature, revealing the vibrational structure of the excited state of $DMA-d_1$ ($(CH_3)_2ND$) for the first time.

• Natural Product Sciences
• /
• v.9 no.2
• /
• pp.52-55
• /
• 2003

The aerial parts of Ephedra aphylla afforded two alkaloids belonging to two different classes. The first alkaloid, ephedradine C, belonging to the spermine alkaloid, a group characterized by its hypotensive effect. The other alkaloid, hordenine is a phenylalkylamine alkaloid isolated for the first time from Ephedra Species. The structures were elucidated by spectroscopic methods and the assignment of some carbons in ephedradine C was achieved based on 2 D-NMR experiments.