• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.8
• /
• pp.1-9
• /
• 1992

Radio data system is a next-generation broadcasting system of digital information communication which multiplexes the digital data into the FM stereo signal in VHF/FM band and provides important and convenient service features. And radio data are composed of groups which are divided into 4 blocks with information word and check word. In this paper, radio data receiver is developed which recovers and process radio data to provide services. Then we confirm that 7dB SNR is required to be 10S0-5TBER of demodulation. Deconding process of shortened-cyclic-decoder has been simulated by computer. Also, the time-compression (by 16 times) method has been adopted for the RDS features post-processing. Via the error probability calculation, simulation and experimentation, the developed receiver system is proved to satisfy the system specification of EBU and implemented by general logic gates and analog circuits.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.5 no.4
• /
• pp.274-283
• /
• 1981

An inexpensive and very simple microcomputer-aided measurement system has been designed for on-line experiments, which perform simultaneously data acquisition, data recorditing, calculations with the data, and positioning of necessary sensors. Interfacting between the microcomputer and the data acquisition board which consists of A/D converter, analog multiplexer, and sample-and-holder, etc. has been done through IEEE-488 interface port and parallel user port both provided by the PET computer's main logic board. Data and control signals are transfered between devices without handshaking. By utilizing BASIC commands PEEK, POKE, SYS, USR which are offered by PET microcomputer, it is possible to link machine code subroutines into the main BASIC program. This facilitates ease of data transfer, programming, and speedy execution of the program. In addition, an X-Y scanning table has been concected to the system in order to automatically position measuring sensors along a pre-determined path of interest.

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.6
• /
• pp.353-357
• /
• 2014

This paper, presents an efficient hardware architecture of high performance SVC(Scalable Video Coding). This platform uses dedicated hardware architecture to improve its performance. The architecture was prototyped in Verilog HDL and synthesized using the Synopsys Design Compiler with a 65nm standard cell library. At a clock frequency of 266MHz, This platform contains 2,500,000 logic gates and 750,000 memory gates. The performance of the platform is indicated by 30 frames/s of the SVC encoder Full HD($1920{\times}1080$), HD($1280{\times}720$), and D1($720{\times}480$) at 266MHz.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.671-676
• /
• 2003

This paper presents 3-phase current regulation of SR motor by only single current sensor. The conventional drive system of SR motor has a current sensor per each phase. In this paper, The asymmetric bridge converter which Is able to control independently phases and be excited simultaneously is used fs the driver system for 6/4 poles SR motor. And the sensor Is replaced 3 sensors of each phase with only one on bus line of converter so as to detect current of every phase. A drive logic circuit is designed on EPLD with Delta modulation using a fixed frequency This technique is verified through simulation and experiment.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.5 no.2
• /
• pp.157-163
• /
• 2005

In this paper, we present the multimodal system based on the fusion of two user-friendly biometric modalities: Iris and Face. In order to reach robust identification and verification we are going to combine two different biometric features. we specifically apply 2-D discrete wavelet transform to extract the feature sets of low dimensionality from iris and face. And then to obtain Reduced Joint Feature Vector(RJFV) from these feature sets, Direct Linear Discriminant Analysis (DLDA) is used in our multimodal system. In addition, the Synergetic Neural Network(SNN) is used to obtain matching score of the preprocessed data. This system can operate in two modes: to identify a particular person or to verify a person's claimed identity. Our results for both cases show that the proposed method leads to a reliable person authentication system.

• Proceedings of the KIEE Conference
• /
• 1998.07b
• /
• pp.458-460
• /
• 1998

The drum level control is initiated by 1-element manual control, and then the control mode is changed to 1-element automatic control mode. Finally, the drum level control is changed to 3-element automatic control mode by the logic based on pre-defined threshold of main steam flow. In terms of plant automation, the automatic 1-element control mode is required from the start-up of boiler. In this paper, the fuzzy controller is adopted for automatic 1-element control of drum level from start-up. It is suggested that the fuzzy controller is used in 1-element control, and the fuzzy-PI cascade controller is used in 3-element control. Finally, the validity of suggested control scheme is shown via simulation.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.3 no.1
• /
• pp.112-120
• /
• 2003

This paper reports the development work carried out in respect of a proposed application of Neural Network approach for the Korean Next generation Reactor (KNGR) now referred as APR-1400. The emphasis is on establishing the methodology and the approach to be adopted towards realizing this application in the next generation reactors. Keeping in view the advantages and limitation of Artificial Neural Network Approach, the role of ANN has been limited to plant status or to be more precise plant transient monitoring. The simulation work carried out so far and the results obtained shows that artificial neural network approach caters to the requirements of plant status monitoring and qualifies to be incorporated as a part of proposed operator support systems of the referenced nuclear power plant.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.7
• /
• pp.1-10
• /
• 1996

There are many challenging problems in mobile robot navigation. As an example, a mobile robot may wander around in local minimum and may wiggle when it moves through a narrow corridor. In addition, the real time obstacle avoidance and the posture control of mobile robot are also very improtant problems. To address these problems, a navigation algorithm which is composed o freal time obstacle avoidance algorithm and a global path planner (GPP) that genrates the shortest path is presented. In this paper, the global path planner reduce the calculation time by reducing the dta to be handled. Also it can make a real time obstacle avoidance by using the fuzzy logic inference. So the presented algorithm provide a stable navigastion for the mobile robot when it fall into the unstable navigation.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.967-969
• /
• 1996

This paper presents fuzzy control rules for automatically driving a model car. The model car has a two sensors. This sensors measure a road outline and get a distance between a model car and a road outline. A Fuzzy Logic Controller(FLC) bases on a knowledge of the human experience. A FLC designed successfully controls the model car. Simulations results verifies the validity of proposed algorithm.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2316-2318
• /
• 2003

본 논문에서는 지게차용 12KW급 대전류 SR모터의 전류의 진상각 및 오프각 제어와 속도의 퍼지 제어에 대해 기술하였다. 대전류 SR모터의 경우는 전압이 낮은 대신 큰 전류가 흘러야 한다. 때문에 저 저항, 저 인덕턴스 형태로 설계된다. 따라서 토크가 유발되는 인덕턴스 상승구간에 원하는 크기의 전류를 얻기 위해서는 인덕턴스의 상승구간 이전에 적절히 스위칭 시켜 주어야 하는데 이를 진상각 제어라 하고, 역토크 구간 인 인덕턴스의 감소구간 이전에 스위칭 시켜주는 것을 오프각 제어라 한다. 이러한 내용을 실구동 실험을 통하여 얻은 토크 및 속도의 변화에 따른 진상각 및 오프각의 가변 데이터를 Look-up 테이블로 만들어 시뮬레이션을 통해 실험을 해본다. 또한 실험을 통한 데이터를 바탕으로 퍼지 제어기를 구성하여 시뮬레이션을 통해 PI 제어기와 비교 분석하여 본다.