• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.6
• /
• pp.882-889
• /
• 2008

Three fabrics, 100% silk, nylon and cotton each, were dyed with a lichen dye solution prepared by a fermentation method under conditions of varying dyebath pH and temperature. To verify the effect of chitosan on fabric dyeing, the 100% cotton fabric was treated with a chitosan solution before dyeing. The K/S, CIE $L^*$, $a^*$, $b^*$, ${\Delta}E$ and Munsell values of the dyed samples were measured. Colorfastness of each sample was also investigated. The maximum K/S value was measured at 520nm wavelength for the dyed silk fabric and at 480nm for the dyed cotton and nylon. The K/S values for the dyed silk fabric were much greater than those of the other fabrics. The dyed silk fabric showed a red tone on the Munsell color system, and the dyed nylon and cotton fabrics a yellowish red tone. Dye affinity to fabrics was better in a neutral or acidic dyebath. As dyeing temperature increased, K/S values increased for the dyed nylon and cotton fabrics but not for the silk. Dyeability of cotton fabrics could improve by Chitosan treatment. As for most natural dyes, colorfastness of all dyed samples was poor. The silk fabric showed an excellent dry cleaning fastness of Grade 5.

• Textile Coloration and Finishing
• /
• v.11 no.3
• /
• pp.1-8
• /
• 1999

Polyester ultrarmcrofiber(UMF, fiber fineness : 0.05d) and the other three kinds of polyester fibers(0.52, 1.04 and 2.08d) were dyed with two disperse dyes, C.1. Disperse Red 60 and Blue 56. Dyeing rates and absorption isotherms of these dyes have been measured at 100, 115 and $130^\circ{C}$ in water system. The dye bath was maintained at pH 5.0 with acetic acid(0.1mo1/1) /sodium acetate(0.1mo1/1) buffers and a liquor ratio of 1000：1. The absorption isotherms from two disperse dyes are nearly linear up to the saturation values, which increase with the temperature of dyeing. Dye uptake decreased with the fiber fineness in lower temperature $100^\circ{C})$, whereas increased in higher temperature$(130^\circ{C})$. A comparatively greater quantity of dye is necessary to dye ultrarmcrofiber fabrics than conventional fabrics. Disperse Blue 56 having a good build-up property is agreed to Fothergill's equation, which is inversely varied with the fiber fineness by the quantity of dye necessary to obtain a given shade.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.101-101
• /
• 2012

천연가죽에 색상을 부여하기 위한 염색공정에서 종전의 합성염료가 아닌 자연에서 추출한 천연염료를 이용하여 블루색상을 가지는 피혁 제조 공정을 확립하였다. 피혁에 적용 가능한 블루색상을 가지는 천연염료 중에 쪽 염료가 유일한 상황이다. 가죽 무게 대비 5%의 쪽염료를 가죽 제조 드럼에 투입하여 100분간 충분히 회전시킨 후에 가죽의 유연성을 부여하는 가지제를 12% 추가로 투입하여 블루 색상을 가지는 가죽을 제조하였다. 그 결과 마찰견뢰도, 일광견뢰도, K/S가 우수한 피혁 염색공정을 확립하였다.

• Textile Coloration and Finishing
• /
• v.9 no.6
• /
• pp.33-41
• /
• 1997

This paper surveys the extraction condition of polygenetic natural dye, Sappan Wood and the effect of ash to the dyeability and fastness. The appropriate time for extracting Sappon Wood was 1hour. The pH was increased as the amount of ash increase. The pH was nearly invariable according to the time of ash solution, the extracting times and temperature. Absorbance of dyeing fabrics was about 480nm. From the result of K/S value determination of fabrics, 10g/$\ell$ quantity of ash was surfficient for treatment and the amount of Sappon Wood was in 100% o.w.f.. K/S value of fabrics pre-mordanted or post-mordanted were higher than that of fabrics simultaneous mordanted.K/S value was increased as pH of mordanting bath decrease and pre-mordanting and post-mordanting fabrics increased the amount of absorption (K/S value) compared with non-mordanted fabrics. It was found that pH of mordanting bath affected the amount of absorption and color change of dyed fabrics. Light fastness of fabric dyed was very poor and the fastness of fabric dyed was not influenced by the mordanting conditions and methods.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.04a
• /
• pp.117-119
• /
• 2008

This study was investigated for the dyeing properties of silk fabrics with Annatto Extract. The dye stuff was extracted by distilled water at 60$^{\circ}C$, 10minutes, 100:1 of bath ratio. The highest K/S value was showed at 25% dye concentration, 60minutes of dyed time at 50$^{\circ}C$ in the temperature. The post mordant conditions were better than that of pre mordant, especially post-Fe mordant showed highest K/S value. The laundering fastness was relatively good by Cu-mordant. Drying cleaning fastness appeared 4-5 grades.

• Textile Coloration and Finishing
• /
• v.15 no.5
• /
• pp.310-315
• /
• 2003

The dyeing of cotton fabric with Forsythia koreana NAKAI was investigated. The colorant was extracted with methanol under various concentrations of dyestuffs at $40^\circ{C}$ and $76^\circ{C}$. UV-VIS spectrum was obtained to find the maximum wavelength of colorant. Cotton fabrics were dyed at different temperatures, mordants, in pre and post mordanting methods. The maximum wavelength of spectrum were 390nm, 410nm, 440nm. The highest K/S value was showed at 100% dye concentration, extracted at $76^\circ{C}$ and dyed at $80^\circ{C}$. The mordant effect was not good in the K/S values. The light fastness was increased at Fe-pre mordant and Cr, Fe-post mordant.

• Textile Coloration and Finishing
• /
• v.25 no.4
• /
• pp.262-270
• /
• 2013

Temporarily solubilized reactive disperse dyes containing ${\beta}$-sulfatoethylsulfonyl group were applied to 100% meta-aramid knitted fabric and their dyeing properties were investigated. Reactive disperse dyes showed relatively high K/S values on meta-aramid fabric when compared with conventional disperse dye or reactive dye, which showed very low K/S values. Color yields of reactive disperse dyes were highly dependent on dyeing pH and optimum results were obtained at pH 6. Percent exhaustion of reactive disperse dye on meta-aramid fabric was over 80% at 2% o.w.f of dye concentration. Wash fastness of pyridone-based reactive disperse dyes was very good to excellent while that of aminoazobenzene reactive disperse dyes was medium to good. Light fastness of all the reactive disperse dyes was very poor which seems to be due to the low photostability of meta-aramid fiber itself.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.2 s.150
• /
• pp.255-265
• /
• 2006

The purpose of this study was to examine the dyeing properties of four kinds of composite yams that were twisted in different processes. The composite yarns consist of acetate and functional polyester in ratio of 70 : 30. The composite yams were dyed at 100$^{circ}C$ and 125$^{circ}C$ using three types of dyes, disperse dyes for acetate fiber, PET fiber and PET-acetate blended fiber, in the three primary colors. The exhaustion($\%$) and K/S value were observed for each case. Also the effects of four different twisting processes to dyeing properties and physical properties were examined. Regardless of twisting methods, the composite yarns that were dyed at 125$^{circ}C$ had higher exhaustion($\%$) than those were dyed at 100$^{circ}C$ with all three types of dyes; However, tendency of the K/S value after reduction cleaning process was measured at 100$^{circ}C$ and the value measured 125$^{circ}C$ had a great difference with disperse dyes for acetate and dyes for PET. The difference of the K/S values of composite yarns, when dyed at 100$^{circ}C$ and 125$^{circ}C$ with disperse dyes for PET-acetate blended fiber, was almost negligible. According to twisting methods K/S values were in the following order: AP1 > AP3 > AP4> AP2. This means that AP1, treated at 220$^{circ}C$, had the highest K/S value and K/S value becomes higher as the yam is higher twisted and becomes lower as lower twisted. On the other hand, the dry shrinkage and wet shrinkage showed low shrinkage rate when the twist was high and steam setting temperature was high.

• Textile Coloration and Finishing
• /
• v.17 no.3 s.82
• /
• pp.8-15
• /
• 2005

Cationic dyeable polyester(CDP) fabric was annealed at varying temperatures range from $120^{\circ}C$ to $220^{\circ}C$ for 1, 3, and 5 min under tension. Dyeing rates of CDP fabrics were measured with cationic and disperse dyes at $100^{\circ}C$ and $120^{\circ}C$ in water system. Also X-ray diffraction pattern, DSC thermograms and dyeability of fabric with cationic and disperse dyes were investigated. The intensities of X-ray diffraction peaks of annealed fabric were increased with increasing in annealed temperature, and peak became sharp with heat setting temperature. The apparent color depth (K/S) of CDP fabric initially decreased with increase of heat-setting temperature up to $160\~180^{\circ}C$ and then increased at higher temperature. The shearing modulus(G) and surface roughness were increased with annealing temperature.

• Tuberculosis and Respiratory Diseases
• /
• v.47 no.4
• /
• pp.478-487
• /
• 1999

Background : Differential diagnosis of pleural malignant mesothelioma from secondary metastatic adenocarcinoma is often difficult. A variety of pathologic techniques have been developed to make a differential diagnosis of carcinoma from mesothelioma. Immunohistochemistry detecting diverse antigenic substances such as CEA, Leu-M1, Bn-3, S-100 protein, vimentin, CK and EMA has been claimed to be of value as a panel in the differential diagnosis of adenocarcinoma from mesothelioma. The aim of this study was to investigate the suitable antibodies to distinguish mesothelioma from metastatic adenocarcinoma and establish candidate markers in a panel. Methods : Complete, one-hour immunohistochemical staining using antibodies against cytokeratin (CK), epithelial membrane antigen(EMA), S-100 protein, vimentin, B72-3, Leu-M1, and carcino-embryonic antigen(CEA) was applied to cell blocks from 7 mesotheliomas and 7 adenocarcinomas which were confirmed by electron microscopic and histpathologic methods. Results : All adenocarcinomas and 71.4% of mesotheliomas expressed the cytokeratin and EMA. S-100 protein and vimentin were expressed in 57.1% and 42.9% of mesotheliomas and 14.3% and 28.5% of adenocarcinomas, respectively. B72-3 was expressed in all adenocarcinomas, but in none of mesotheliomas. Leu-M1 was positive in 71.4% of the adenocarcinoma and 14.3% of the mesotheliomas. CEA was positive in all adenocarcinomas and 42.9% of mesotheliomas. Leu-M1 and B72-3 were coexpressed in 71.4% of adenocarcinomas but in none of mesothelioma. B72-3 and CEA were coexpressed in all adenocarcinomas, but in none of mesotheliomas. Conclusion : We concluded that B72-3 immunohistochemistry or panel staining of B72-3 and CEA could be recommanded for the differential diagnosis of pleural mesothelioma from metastatic adenocarcinoma.