• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.5
• /
• pp.803-810
• /
• 1995

Co-immobilized mixed culture system(A-Z system) composed of two different oxygen-demanding strains, aerobic(Aspergillus awamori) and anaerobic(Zymomonas mobilis) strains, in a Ca-alginate gel beads was developed to increase ethanol production from raw starch as a carbon source. Optimal mixture ratio of A. awamori and Z. mobilis was $1.25{\times}10^{9}\;spores/L-gel$ and 0.5g cells/L-gel, respectively. After 120 hours of cultivation, gel beads distinguished oxygen-rich surface for A. awamori from oxygen-deficient central part for Z. mobilis. At A-Z culture system, yield of ethanol on glucose, $Y_{p/s}=0.18$, was very low and there was high leakage of cells from surface of gel beads. At A-Z 36 cultrue system with changing silicon check valve for cotton plug at 36 hours in A-Z culture system, there was no cell leakage from gel beads, pH was maintained at around 4.3 during cultivation, and yield of ethanol on glucose, $Y_{p/s}=0.36$, showed 2 times higher than that of control culture system(cotton plug culture).

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.741-745
• /
• 2001

The necessity of a Z-shape heat pipe may occur in a special application such as a cooling module for an electronic equipment having a limited accessible space. Either of the two end part works as evaporator or condenser and the length of the middle part is 200mm. The heat pipe was made of 3/8 inch copper tube having 60 spiral groove with screw angle of 10 degrees. Water and acetone were used as working fluids. The fill charge ratio of the working fluid was varied for different values of thermal loads. The thermal resistance was calculated based on the temperature measurements along the heat pipe axis. The maximum thermal loads were 80W for water and 100W for acetone heat pipe. The optimum fill charge ratio was identified through a series of experiments.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.603-610
• /
• 2003

The influence of Poisson's ratio on the tensile strength of brittle materials is neglected in many studies. When brittle materials are loaded in compression or impact, substantial tensile stresses are induced within the materials. These tensile stresses are responsible for splitting failure of the materials. In this paper, the state of stress in a spherical particle due to two diametrically opposed forces is analyzed theoretically. A simple equation for the state of stress at the center of the particle is obtained. An analysis of the distribution of stresses along the z-axis due to distributed pressures and concentrated forces, and on diametrically horizontal plane due to concentrated forces, shows that it is reasonable to propose the tensile stress at the center of the particle at the point of failure as a tensile strength of the particle. Moreover, the tensile strength is a function of the Poisson's ratio of the material. As the state of stress along the z-axis in an irregular specimen tends to be similar to that in a spherical particle compressed diametrically with the same force, this tensile strength has some validity for irregular particles as well. Therefore, it can be proposed as the tensile strength for brittle materials generally. The effect of Poisson's ratio on the tensile strength is discussed.

• Fibers and Polymers
• /
• v.6 no.1
• /
• pp.89-94
• /
• 2005

The purpose of this study is to offer acoustical database of warp knitted fabrics by investigating frictional sound properties and physiological responses according to structural parameters such as construction, lap form, and direction of mutual guide bar movement. Fabric sounds of seven warp knitted fabrics are recorded, and Zwicker's psychoacoustic param­eters - loudness(Z), sharpness(Z), roughness(Z), and fluctuation strength(Z) - are calculated. Also, physiological responses evoked by frictional sounds of warp knitted fabrics are measured such as electroencephalogram (EEG), the ratio of high fre­quency to low frequency (HF/LF), respiration rate (RESP), skin conductance level (SCL), and photoplethysmograph (PPG). In case of constructions, frictional sound of sharkskin having higher loudness(Z) and fluctuation strength(Z) increases RESP. By lap form, open lap has louder and larger fluctuating sound than closed lap, but there aren't significant difference of physi­ological responses between open lap and closed lap. In direction of mutual guide bar movement, parallel direction evokes bigger changes of beta wave than counter direction because of its loud, rough, and fluctuating sound. Fluctuation strength(Z) and roughness(Z) are defined as important factors for predicting physiological responses in construction and mutual guide bar movement, respectively.

• The Journal of Asian Finance, Economics and Business
• /
• v.9 no.3
• /
• pp.275-283
• /
• 2022

This study aims to investigate the influence of internal factors on the bankruptcy risk of an enterprise through a sample of 439 companies listed on the Vietnamese stock exchange. The research collected secondary data from annual audited financial statements from 2008 to 2019 of listing companies. Using two different regression models with two dependent variables, six independent and control variables, we discovered that three of the model's six factors, namely return on total assets, current payment rate, and financial leverage, influence the risk of bankruptcy and account for 86.78% of the variations in firm bankruptcy risk. Financial leverage has the opposite effect on the Z-score index, increasing the risk of bankruptcy of listed firms. Return on total assets and current ratio have a positive impact on the Z-score index, reducing the risk of bankruptcy of listed companies. The findings also revealed that there is no evidence that the size of a corporation, its fixed asset investment ratio, or the size of an auditing firm have an impact on the Z-score index. These findings provide crucial evidence for business owners and managers, as well as shareholders making future capital investment decisions. Our findings can be applied to other businesses in Vietnam and similar jurisdictions.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.3
• /
• pp.609-615
• /
• 2005

The effects of Zr/Ti concentration ratio in PLZT (10/y/z) thin films prepared by sol-gel method are investigated for the NVFRAM application. As Ti amount of Zr/Ti concentration ratio increases, the dielectric constants at 10 kHz decrease from 550 to 400, while the loss tangents increase from 0.028 to 0.053 and the leakage current densities at 170 kV/cm decrease from $1.64\times10^{-6}$ to $1.26\times10^{-7}\;A/cm^2$. In the results of hysteresis loops measured at $\pm170kV/cm$, the remanent polarization and the coercive field increase from 6.62 to $12.86{\mu}C/cm^2$ and from 32.15 to 56.45 kV/cm, respectively, according to the change from 40/60 to 0/100 in Zr/Ti concentration ratio. Fatigue and retention properties also improve much as the Zr/Ti concentration ratio change from 40/60 to 0/100. After applying $10^9$ square pulses with $\pm5V$, the remanent polarization of the PLZT (10/40/60) thin film decreases $50\%$ from the initial state while that of the PLZT (10/0/100) thin film decreases $28\%$. In the results of retention measurements of 10s s, the remanent polarization of the PLZT (10/0/100) thin film dec.eases only $10\%$ from the initial state, while that of the PLZT (10/40/60) thin film decreases $40\%$.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.57-60
• /
• 2002

In this paper, transmission lines with low and high characteristic impedance (Z$_{0}$) are fabricated and analyzed. The transmission lines are fabricated on the benzo-cyclo-butene (BCB) films of a low dielectric constant. For the low Z$_{0}$, two types of coplanar waveguide (CPW) structures are fabricated, which include bottom-ground and double-ground type. Measurement shows that Z$_{0}$ values for each CPW type are 7.3 and 9.4$\Omega$, respectively, at a signal line width of 100 #m. Whit the ratio between the spacing of bottom-ground and the signal line with becomes greater than 2.5, the Z$_{0}$ is nearly saturated. In addition, thin film microstrip lines fabricated using the BCB insertion layers show very low Z$_{0}$ of 25.5$\Omega$, and this impedance is ~64 % of the values obtained from the BCB-based CPW structures of the same line width. Measurement result of CPW on BCB layer is 100.5 Ω.s 100.5 Ω.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.171-172
• /
• 2011

The paper proposes a close loop control algorithm for Z-source inverter. The algorithm is realized by PWM duty ratio control in order to improve the output voltage to it's desired level. The controller consist of the output voltage PID controller and DC input voltage P controller. Using the DQ coordinate transformation simplify the controller design. The PSIM simulation results verify the validity by means of comparing the system with or without compensation and estimating if the system has output consistency function when ZSI's load and input voltage value changing.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.105-107
• /
• 2002

This paper presents a algorithm for contingency ranking using the real power ratio. The fundamemtal cause of voltage collapse is considered due to excessive power trnsfer through the line. To obtain contingency ranking, maximum real power tansferred to the load is obtained when load impedance $Z_r$ equal to line impedance $Z_s$. This algorithm is verified by simulation on a 6-bus test system.

• Proceedings of the KIEE Conference
• /
• 2002.06a
• /
• pp.146-148
• /
• 2002

This paper presents a algorithm for contingency ranking using the real power ratio, The fundamemtal cause of voltage collapse is considered due to excessive power trnsfer through the line To obtain contingency ranking, maximum real power tansferred to the load is obtained when load $impedance^{Z_r}$ equal to line $impedance^{Z_s}$, This algorithm is verified by simulation on a 6-bus test system.