• Journal of Nutrition and Health
• /
• v.39 no.6
• /
• pp.572-584
• /
• 2006

The purpose of this study was to compare the nutrient intake and diet quality of male college student according to smoking groups. Subjects were recruited and divided into three groups according to the smoking, which included non-smoker (n = 100), light-smoker (n = 78; packyear < 5), and heavy-smoker (n = 76; packyear ${\geq}$ 5). Subjects were interviewed using a general questionnaire, 24-hour recall method for dietary intake and diet quality. The average age of the subjects were 22.7 years for non-smoker, 23.5 years for light-smoker, and 23.4 years for heavy-smoker. Also the results showed that the heavy-smoker was significantly more often to drink coffee and alcohol compared with the other two groups (p<0.001, p<0.05). The mean daily energy intake was 2278.1 kcal in non-smoker, 2148.3 kcal in light-smoker, and 2144.4 kcal in heavy-smoker. The heavy-smoker consumed significantly lower intakes of vitamin C (p<0.001), calcium (p<0.01), animal calcium (p<0.01), and potassium (p<0.05) compared to the non-smoker and light-smoker. Also NAR (Nutrient Adequacy Ratio), ND (Nutrient Density), and INQ (Index of Nutritional Quality) of these nutrients in heavy-smoker were lower than the other two groups. Mean adequacy ratio (MAR) was 0.78 in non-smoker, 0.78 in light-smoker, and 0.74 in heavy smoker (p<0.05). The heavy-smoker consumed significantly lower intakes of fruits (p<0.001) compared to the non-smoker and light-smoker. The DVS (Dietary Variety Score) of heavy-smoker (26.8) was significantly lower than that 30.4 of non-smoker and 31.5 of light-smoker (p<0.01). In conclusion, heavy-smoker man have low intake status of vitamin C, calcium and potassium, and partly low diet quality. Therefore it was needed that well planed diet to replace the nutrients supplied from excluded food groups in heavy- smoker.

• Korean Journal of Community Nutrition
• /
• v.13 no.1
• /
• pp.100-110
• /
• 2008

Recently, a lot of epidemiological studies revealed that low HDL-cholesterol level was a better predictor of risk for coronary heart disease than total cholesterol. This study investigated the anthropometric parameters, clinical blood indices, and dietary factors influencing serum HDL-cholesterol level by using a cross-sectional study for Korean female college students. The subjects were 94 female college students. They were divided into three groups according to their serum HDL-cholesterol levels, low HDL-cholesterol (<50 mg/dL, n=20), medium HDL-cholesterol (50 $\leq$, < 60 mg/dL, n=39) high serum HDL-cholesterol groups (60 $\leq$ mg/dL, n = 35). This study examined their demographic data and dietary intake throughout a questionnaire. Clinical blood indices were measured using an automatic blood chemistry analyzer (Selectra E), after 12 hours of fasting. BMI, body weight, fat mass, and waist circumferences were significantly increased according to low serum HDL-cholesterol levels. Serum lipid analysis showed a significantly higher level of TG, LDL-/HDL-Ratio, atherogenic index in the low HDL-cholesterol group. Serum levels of GPT, uric acid and alkaline phosphatase in the low HDL-cholesterol group were significantly higher than in the other group. The average consumption of energy was 1627 kcal and 77.76% of estimated energy requirement (EER). The mean ratio of calories from carbohydrate: protein: fat was 57:15:28. The low HDL-cholesterol group was significantly higher than the other groups in eggs, fat and oils consumption. Interestingly, milk and diary products consumption of low HDL-cholesterol group was half (p < 0.05) of those of the other groups. In conclusion, serum HDL-cholesterol levels appeared to be decreased by increasing BMI, fat mass, waist circumference, and serum TG level. In addition, some dietary factors seemed to be related to serum HDL-cholesterol levels. However, further research is needed to elucidate the exact relationship between serum HDL-cholesterol level and dietary factors.

• Journal of Ocean Engineering and Technology
• /
• v.35 no.5
• /
• pp.327-335
• /
• 2021

Microcracks can rapidly grow and develop in high-strength steels used in offshore structures. It is important to render these microcracks harmless to ensure the safety and reliability of offshore structures. Here, the dependence of the aspect ratio (As) of the maximum depth of harmless crack (a_hlm) was evaluated under three different conditions considering the threshold stress intensity factor (Δk_th) and residual stress of offshore structural steel F690. The threshold stress intensity factor and fatigue limit of fatigue crack propagation, dependent on crack dimensions, were evaluated using Ando's equation, which considers the plastic behavior of fatigue and the stress ratio. a_hlm by peening was analyzed using the relationship between Δk_th obtained by Ando's equation and Δk_th obtained by the sum of applied stress and residual stress. The plate specimen had a width 2W = 12 mm and thickness t = 20 mm, and four value of As were considered: 1.0, 0.6, 0.3, and 0.1. The a_hlm was larger as the compressive residual stress distribution increased. Additionally, an increase in the values of As and Δk_th(l) led to a larger a_hlm. With a safety factor (N) of 2.0, the long-term safety and reliability of structures constructed using F690 can be secured with needle peening. It is necessary to apply a more sensitive non-destructive inspection technique as a non-destructive inspection method for crack detection could not be used to observe fatigue cracks that reduced the fatigue limit of smooth specimens by 50% in the three types of residual stresses considered. The usefulness of non-destructive inspection and non-damaging techniques was reviewed based on the relationship between a_hlm, a_NDI (minimum crack depth detectable in non-destructive inspection), a_{cr N} (crack depth that reduces the fatigue limit to 1/N), and As.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.1
• /
• pp.45-51
• /
• 2001

In order to investigate the optimal design weight of sinkers for preventing cage net from deforming in current, the model experiment on 2 types of square cage nets with different S sub(n)/S, the ratio of total area of netting projected to the perpendicular to the water flow S sub(n) to wall area of netting S, and 4 kinds of sinkers was carried out in circulation water channel. The model cage nets were made in 1/10 scale and the total weight in water of 4 sinkers attached to each corner of their bottom frames was 18, 54, 90, and 126g, respectively equivalent to 0.1, 0.3, 0.5, and 0.7 kg per unit area of prototype net. The results obtained can be summarizes as follows; Due to the deformation of each net where it was lifted towards the surface in severe conditions, its volume was reduced. This depended highly on the weight of sinkers placed in the bottom corner of cage nets, even if the variation of S sub(n)/S had a little effect on their deformation in current less than 0.4 m/s. In addition, it was observed that the total weight of sinkers for preventing the net from deforming to the extent of less than 50% inside its initial volume was 31 to 245 kg in the range of 0.3 to 0.6 m/s and the adequate design weight of sinker was approximately 0.5 kg per its unit area.

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2004.11a
• /
• pp.103-104
• /
• 2004

This study was evaluated the dietary affect of ceramics on laying performance, intestinal microflora population, NH$_3$ and VFA gas emission from excreta and fatty acids composition of egg yolk in laying hens. A total of 180 layer at 34 weeks of age were fed the experimental diets containing 0.0 % (Control), 0.4 % and 0.8 % of ceramics powder for 6 weeks. It is concluded that 0.4 % ceramics powder supplementation in the 34 to 40 weeks laying hens diet, improves the laying performance and ratio of egg yolk n-6/n-3 fatty acids contents and decreasing emission of NH$_3$ and VFA gas from excreta.

• Journal of Nutrition and Health
• /
• v.33 no.1
• /
• pp.23-32
• /
• 2000

The purpose of this study was to investigate the effcts of n-3, n-6 fatty arid and d-limonene on histopathological and biochemical changes in experimental rat hepatocarcinogenesis. To attain the above objectives, weanling Sprague-Dawley female rats were intraperitoneally injected twice with a dose of diethylnitrosamine(DEN, 50mg/kg body weight) and after 1 week 0.05% phenobarbital was provided with water. Sardine oil rich in n-3 fatty acids and corn oil rich in n-6 fatty acids were fed at 15% by weight and 5% d-limonene was added to the diet in each group. Ten weeks or 20 weeks after DEN treatment, rats were sacrifirced. The formation of glutathione S-transferase placental form positive(GST-P$\^$+/) foci was significantly decreased by the treatment of either sardine oil or d-limonene HMG-CoA reductase activity was not affected by dietary oils and d-limonene. Protein kinase C (PKC) activity was decreased by either sardine oil or d-limonene. Particularly d-limonene decreased the membrane PKC activity. Membrane Cholesterol/Phospholipid(Chol/PL) ratio was significantly decreased by d-limonene in sardine oil group. The data showed that GST-P$\^$+/ foci number was positively correlated with membrane PKC activity and serum cholesterol and negatively correlated with liver cholesterol level. These results suggest informations about the correlation between histopathological and biochemical changes such as cholesterol metabolism and PKC activity in experimental hepatocarcinogenesis and thereby can elucidate the possible mechanism related to the cancer inhibition.(Korean J Nutrition 33(1) : 23-32, 2000)

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.9
• /
• pp.718-722
• /
• 2011

In this work, we investigated to the etching characteristics of the TiN thin film in He/$BCl_3/Cl_2$ plasma. The etch rate was measured by the gas mixing ratio, the RF power, the DC bias voltage and the process pressure. The maximum etch rate in He/$BCl_3/Cl_2$ plasma was 59 nm/min. The etch rate increased as the RF power and the DC-bias voltage was increased. The chemical reaction on the surface of the etched the TiN thin films was investigated with X-ray photoelectron spectroscopy (XPS). The intensity of Ti 2p and N 1s peaks are varied during etching process. A new peak was appeared in He/$BCl_3/Cl_2$ plasma. The new peak was revealed Ti-$Cl_x$ by Cl 2p peak of XPS wild scan spectra analysis.

• Journal of IKEEE
• /
• v.27 no.4
• /
• pp.399-404
• /
• 2023

In this paper, we analyzed the current path in the O/N/O (Oxide/Nitride/Oxide) structure of 3D NAND Flash memory and in the O/N/F (Oxide/Nitride/Ferroelectric) structure where the blocking oxide is replaced by a ferroelectric. In the O/N/O structure, when V_read is applied, a current path is formed on the backside of the channel due to the E-fields of neighboring cells. In contrast, the O/N/F structure exhibits a current path formed on the front side due to the polarization of the ferroelectric material, causing electrons to move toward the channel front. Additionally, we performed an examination of device characteristics considering channel thickness and channel length. The analysis results showed that the front electron current density in the O/N/F structure increased by 2.8 times compared to the O/N/O structure, and the front electron current density ratio of the O/N/F structure was 17.7% higher. Therefore, the front current path is formed more effectively in the O/N/F structure than in the O/N/O structure.

• Korean Journal of Biological Psychiatry
• /
• v.13 no.4
• /
• pp.279-288
• /
• 2006

Objectives : We investigated the association of SNP A and P1763 polymorphisms on dystrobrevin binding protein 1(DTNBP1) gene with smooth pursuit eye movement(SPEM) abnormality in Korean schizophrenic patients. Methods : We measured SPEM function in 217 Korean schizophrenics(male 116, female 101) and divided them into two groups, one is a good SPEM function group and the other is a poor SPEM function group. We then analyzed SNP A polymorphism and P1763 polymorphism on DTNBP1 gene from their DNAs extracted from their blood. We compared the differences of genotype and allele distributions of the two polymorphisms on DTNBP1 gene between the two groups. Results : The Ln S/N ratio(mean${\pm}$SD) of the good SPEM function group was $4.39{\pm}0.33$ and the ratio of poor SPEM function group was $3.17{\pm}0.71$. There were no statistically significant differences of age and male/female ratio between the two groups. There were no significant differences of genotype or allele distributions of the SNP A polymorphism and P1763 polymorphism on DTNBP1 gene between the two schizophrenic groups divided by SPEM function. Conclusion : The results suggest that SNP A polymorphism and P1763 polymorphism on DTNBP1 gene might not be related to SPEM function abnormality in schizophrenia.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.13-16
• /
• 2000

(PbS)$_{1-x}$ -(CuS)$_{x}$ thin films(x=0, 0.5, 1) were grown on glass substrates by using a chemical bath deposition method. The molecular ratio of Pb to Cu for the PbS-CuS thin films(x=0.5) was measured about 7:3 by using EDX and XRF. The resistivity of non-annealed (PbS)$_{1-x}$ -(CuS)$_{x}$ thin films was about 10 $\Omega$ . cm. However, after annealing, the resistivity of PbS showed a little change, while PbS-CuS and CuS significantly decreased in the range of 0.002 to 0.005$\Omega$.cm. PbS was p-type and CuS was n-type.-type.