• STI Policy Review
• /
• v.9 no.1
• /
• pp.99-132
• /
• 2018

Developing countries face numerous challenges in the process of building science, technology, and research capacity; in particular, the formation and accumulation of skilled S&T workforce. The lack of organized and sustainable higher education options (Master and Doctoral programs), nonexistent or low-quality academic programs, and the absence of research-oriented study options are some of the strong contributors for talented students to emigrate to developed countries. At the same time, the consolidation of a global knowledge economy, the internationalization of higher education, and the competition to attract foreign talent in industrialized countries present challenges for underdeveloped nations to retain their already scarce skilled human resources. In this context, student mobility has been used as a policy mechanism to cope with S&T workforce shortages in S&T laggard nations. It has also enabled opportunities for international cooperation to play a key role. While significant literature has been devoted to studying the gains of developed nations with the arrival and potential migration of the mobilized students, few scholarly inquiries have addressed the benefits and losses experienced by their countries of origin. More importantly, limited research can be found on policy options and policy implications for developing countries to deal with the dilemmas presented by the brain-drain/brain-circulation debate. The goal of this article is to study empirical evidence of an international cooperation initiative for student mobility between the Republic of Korea and Guatemala (implemented during 2009-2015). The paper analyzes this particular international cooperation experience from the perspective of the different actors involved and attempts to draw policy implications and policy options for developing countries to deal with potential risks and gains derived from international mobility for their S&T capacity building.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.71-76
• /
• 2000

In generally, grouting consists of injecting a suspension or solution into the voids of soils. The low slump mortar grout has been used in America since 1950's. The Compaction Grouting, the injection of a very stiff under relatively high pressure, form a cylinderical grout support pile. The grout generally does not enter soil pores but remains in homogeneous mass that gives controlled displacement either to compact loose soils, or for lifting of structures, or both. In this paper, on the case of the reinforcement construction of 00 plant that the foundation's bearing capacity is insufficient and is to reinforce the foundation, a study has been peformed to analyze the effectiveness of the ground improvement. The bearing capacity of the Compaction Pile has been verified by the S.P.T and the settlement of the improved ground has been monitored rising the magnetic extensometer.

• Journal of Korean Academy of Nursing
• /
• v.41 no.1
• /
• pp.80-91
• /
• 2011

Purpose: This study was conducted to test the effects of a community health promotion project for farmers cultivating garlic. Bandura's self-efficacy theory (1986) and Chaskin's community capacity framework (2001) were used as the theoretical framework. Methods: A nonequivalent control group pretest-posttest design was used. Study participants were 72 garlic farmers (intervention: 36, control: 36). The community health promotion project consisted of health promotion program and community capacity building strategies and was provided for 12 weeks (8 during farming off-season and 4 during farming season). Data were collected between February 23 and May 31, 2009 and were analyzed using chi-square test, Fisher's exact test, t-test, and repeated measure ANOVA using SPSS/WIN 12.0. Results: For the experimental group, significant improvement was found for self-efficacy, farming related health behavior, physical fitness (muscle strength, muscle endurance, upper body flexibility, lower body flexibility, cardiovascular endurance, balance, agility), farmer's syndrome, and health related quality of life as compared to the control group. Conclusion: The findings of the study indicate that the community health promotion project for garlic farmers is effective and can be recommended as a nursing intervention for health promotion of garlic cultivating farmers.

• Journal of the Korean Solar Energy Society
• /
• v.33 no.3
• /
• pp.75-81
• /
• 2013

In this study, we analyze the performance characteristics of Building Integrated Photovoltaic (BIPV) system of K Research Building which was designed with the aim of zero carbon building. In addition, BIPV system, which is consist of three modules; G to G(Glass to Glass), G to T(Glass to Tedlar/Crystal) and Amorphous, has 116.2kWp of total capacity, and is applied to wall, window, atrium and pagora on roof. Therefore, in this paper, our research team analyzed BIPV yield and generation characteristic. BIPV yield was 112,589kWh a year from January 2012 to December 2012. And after applying PV panels on the building, the power from the best setting angle, $30^{\circ}$, of panel was compared. In addition, when the PV was attached practically on the building, the generation power was analyzed. BIPV modules in this study the relationship between module setting angle, type of modules ect. and power characteristics plans to identify.

• Proceedings of the KIEE Conference
• /
• 1997.07f
• /
• pp.2159-2161
• /
• 1997

This paper presents the investigations and the reduction methods for EMI in the Elevator(E/L) system. In the large capacity E/L. Power factor controlled IGBT converter is used, so that the conducted EMI level is mostly determined by a high frequency input current. We suggest the low cost EMI countermearsure for E/L system using by a LCL filter ed a low cost noise filter.

• Steel and Composite Structures
• /
• v.12 no.2
• /
• pp.149-166
• /
• 2012

This paper presents an experimental investigation on the performance of 2.5 m long reinforced concrete (RC) T-beams strengthened in shear using epoxy bonded glass fibre fabric. Eighteen (18) full scale, simply supported RC T-beams are tested. Nine beams are used as control beam specimens with three different stirrups spacing without glass fibre reinforced polymer (GFRP) sheet and rest nine beams are strengthened in shear with one, two, and three layers of GFRP sheet in the form of U-jacket around the web of T-beams for each type of stirrup spacing. The objective of this study is to evaluate the effectiveness, the cracking pattern and modes of failure of the GFRP strengthened RC T-beams. The test result indicates that for RC T-beams strengthened in shear with U-jacketed GFRP sheets, increase the load carrying capacity by 10-46%.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.74-75
• /
• 2014

In remodeling business or construction of both new strucures and existing structures, Case that pile foundation was set is often. Micro pile, holding compressive force and tensile force by spherical friction, is supported by skin friction rather than end bearing capacity. but, This is weak in tension. Active area of micro pile's skin friction is narrow and micro pile don't do unification behavior hence. So bearing capacity was not fully mobilized in existing researching. In this study, in order to compensate for this method, micro pile to install Resisting Fixture is proposed.

• STI Policy Review
• /
• v.1 no.2
• /
• pp.1-18
• /
• 2010

The development and maintenance of human capacity in economies is critical to long term competitiveness, but also for the overall health and environment of regions. Yet, human science and technology-based capacity is multidimensional and has interrelated characteristics which present certain policy challenges. This paper addresses a range of issues specific to a discussion on human capacity in S&T. First, the paper emphasizes the importance of acknowledging the complexity of human capacity issues and how they evolve along the STEM (science, technology, engineering, and mathematics) pipeline. The pipeline is an often used reference to describe the training and development in STEM disciplines, from early childhood education, to more advanced training, and finally to professional collaboration and interaction and serves as a useful organizing framework for the discussion of capacity along the career evolution process. Second, the paper offers an organizing framework for discussion of policy mechanisms that have been developed to address issues and gaps that occur along this STEM pipeline. Specifically, it contrasts the traditional mechanisms of building human capacity in STEM areas with newer "gap filling" and integrated approached to addressed human capacity disparities and priorities. Third, the paper addresses core challenges in human capacity in STEM, including the education and training, participation of women and underrepresented groups, brain drain/brain circulation issues, and the globalization of science. The paper concludes with a discussion of policy implication for the development of human capacity.

• Journal of Forest and Environmental Science
• /
• v.32 no.2
• /
• pp.173-181
• /
• 2016

This study designed a model of the efficient production schemes and raw materials transportation optimization of current South Korean's simple and monolithic distribution system of wood to build a SCM (supply chain management) as a basic level to establish a distribution of future by pellet production of raw materials costs and reduce transport costs, and specifically to forest of pallet to contribute to revitalizing the market. The result of each transportation costs after building the best transportation network from raw material supply area to demand area applying transport law was 964,600 thousands Won from 6 supply areas to 7 demand areas. And the result of each model's analysis to get the pellet's efficient production through production cost reduction showed that it reduced from 325,701 Won/t to 240,106 Won/t, results of existing efficient pellet for the production model 8,233 tons over 20,000 tons annual production capacity from the size of the expanded production capacity when the expansion. However, when the production size expanded to 50,000 Tons of the production, the effect was very small even though production cost decreased.

• Journal of the Korean Society of Safety
• /
• v.21 no.2 s.74
• /
• pp.70-79
• /
• 2006

many plumbing system are needed in the ceiling of the building as it becomes advanced more and more. This leads to make effective space between ceiling level and slab less. Also, piping system is not suitably arranged and operated if it is bent around the columns which they are a lot. But this system can be more effective if it passes through the columns directly. Most people think that those columns should not be damaged with such as holes. But actually this is existed in a hotel building in switzerland. This study is to fing out how much capacity the columns become damaged and low using model size of $20cm{\times}30cm$ rectangular section, and 160cm long, in the structural test. it's compressive strength is focused on $240kg/cm^{2}$ design strength, commonly used in korea. Compressive test for them was done at Hanyang University using UTM one thousand tone(1000t) capacity. Variable numbers for the study are one hole of dia 3cm with distance 20cm or 40cm, two holes of dia 3cm with 20cm and 40cm distance, one hole of dia 5cm with distance 20cm and 40cm, two holes of dia 5cm with 20cm and 40cm distance, me eccentric hole with 20cm and 40cm distance, Normal(without hole). two test specimens of each variable are made for the test. ED5H20 capacity was 16.7% decreased, compared to normal one. While ED5H40 distant 40cm from the end of column top showed 19.5% capacity decrease, compared to normal one. Strain of ED5H20 diameter 5cm, in distance of 20cm form the top of the column was less 5% than the one of diameter 3cm. Finally, conclusions are that in case of hole diameter 3cm, located at 20cm from the end of the column top, capacity was decreased down to 3, percent only compared to the same diameter hole with 20cm distant from the end of it.