• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.138-141
• /
• 2011

Carbon dioxide concentration of railroad passenger cabin is obliged to be kept lower than guideline values of 'Indoor air quality guideline for public transportations', but actual carbon dioxide concentration frequently exceeds this guideline value during the morning and evening rush hours. For improving comfortability and satisfaction of passengers, concentration control method using $Al_2O_3$ adsorbents was presented. The adsorbent is made from $Al_2O_3$ and LiOH. $Al_2O_3$ perform as a frame and LiOH as a chemical adsorbent. The adsorbent performance experiment was carried out by measuring concentration change of Carbon dioxide in terms of flow, initial concentration and amount of adsorbent. It is expexted that the obtained results will be used to lower carbon dioxide concentration of railroad passenger cabin.

• Journal of Korean Society for Atmospheric Environment
• /
• v.9 no.1
• /
• pp.93-100
• /
• 1993

This study was carried out to investigate the relationship between the traffic signal systmes and the air pollutants emitted by the motor vehicles at Kangnam Intersection. One of the most important measures of effectiveness (MOE) in traffic studies is the delay to vehicles in the system. Delay represents indirect costs to the motorist in terms of time loss and a direct cost in terms of fuel consumption during idling. The results of TRANSYT-7F modeling was correlated among delay, fuel consumption and total travel tiem. Air pollutants emission rate can be calculated by the results of modeling and the Korean type emission factor. As expected the highest emissions, for air pollutants, are observed during the morning rush hours (07 : 00-10 : 00). For better results of modeling, the TRANSYT-7F model needs to modify for the Korean type of traffic model. The results of this study indicate that the variation of air pollutants emission rates were closely related to the traffic signal system.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.2195-2201
• /
• 2010

High concentration of carbon dioxide in subway cabin may cause various adverse effects on the passengers. Because carbon dioxide is produced by breathing of passengers, carbon dioxide concentration at rush-hours is extremely high. In most cases, the ventilation is not that easy for subway cars due to the high concentration of dust in tunnels. In this study, more practical way to control carbon dioxide in subway car was suggested. The decrease of carbon dioxide concentration was observed when the system was applied to a real subway car. The regenerative method for maintenance-free carbon dioxide control system was also suggested.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1371-1375
• /
• 2010

Recently, the Seoul Metro has replaced the old series of Line No.2 and 3 to the new ones. In spite of the replacement, the new ones are more likely to be slippery compared to the old ones. Because the subway system has such short intervals, delayed subways influence the whole line systems, especially during the rush hours. And the slip causes the delay. Therefore we are willing to find out the reason why the new ones are more defective and we will try to mince it from the view of mechanical aspects and handling aspects of driving.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.4
• /
• pp.48-53
• /
• 2010

Roadside measurement of ultrafine particles, black carbon, and NOx was carried out to investigate air pollution at a junction area contaminated with vehicle emissions in Seoul from March 19 to 23, 2007. Diurnal variation of ultrafine particles, black carbon, and $NO_x$ concentrations at a roadside showed minimum at around 2-4 a.m. and two peak modes during the morning and evening rush hours. Since these pollutants might be mainly emitted from vehicles, the roadside was highly contaminated with vehicles.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1079-1080
• /
• 2006

This paper presents the methods to save energy by using load consumption pattern analysis. Base on the substation annual power usage data, the characteristic of the substation power consumption have investigated. With this investigation effective electrical billing condition and the control target load has been determined. Most of power usage comes from the motor car, so power system and load table of motor car were reviewed. And in the metropolitan area the peak power consumption occurs at summer or winter rush hours because of its typical characteristics. From this data control point of time are determined. Through the whole study the methode to control the power Peak consumption are proposed and prototype was designed.

• Journal of Korean Society for Atmospheric Environment
• /
• v.9 no.E
• /
• pp.364-372
• /
• 1993

The purpose of this study is to analyze traffic patterns by use of TRANSYT-7F Model, and to choose the optimum traffic-light cycle length and cycle splite to improve traffic flow and air quality at Samsung Intersection in Seoul. Emission rates of air pollutants are calculated for three time segments 0700-0900, 0900-1800 and 1800-2000. The traffic volume correlated reasonably well with air pollutants emitted ; however, the phasing and timing of traffic signals was found to equally be important. The results of performance with optimal setting indicate that the best cycle length were 80sec(0700-0900), 95sec(0900-1800) and 90sec(1800-2000), res-pectively. As expected the highest emissions of air pollutants were observed during the evening rush hours (1800-2000). A properly designed signalized intersection can help reduce traffic delay, driver discomfort, fuel consumption, and air pollution by efficiently the capacity of existing intersection.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.6
• /
• pp.860-865
• /
• 2014

This paper proposes the method for determination of the capacities of ESS (Energy Storage System) and PCS (Power Conditioning System) for the peak load shaving based on the load data in the substation of urban railway. In addition, this paper analyze the actual measurement of loads in the substation of urban railway. The load of a weekday in the substation of urban railway is high around rush hours in the morning and evening, which is different from that of a normal substation. The required capacities of ESS and PCS become larger as the amount of peak load shaving is higher, and are affected from the patterns of daily load in the substation.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.37 no.1
• /
• pp.133-140
• /
• 2014

An efficient heuristic for two-vehicle-one-depot problems is developed in this research. Vehicle moving speeds are various along hour based time intervals due to traffic jams of rush hours. Two different heuristics are examined. One is that the delivery area assignment is made using Sweep algorithm for two vehicles by splitting the whole area in half to equally divide all delivery points. The other is using common area by leaving unassigned area between the assigned for two vehicles. The common area is reassigned by two stages to balance the completion time of two vehicle's delivery. The heuristic with common area performed better than the other due to various vehicle moving speeds and traffic jams.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1306-1308
• /
• 2003

RF-ID technic will got over not only damage which can be caused by contact ID technic but also worse awareness with the lapse of time. In advance, for subway the fares of mass transportation at rush hours of the days, it's important to find a way to collect fares without unnecessarily delaying passengers. In this paper. we are proposing RF-ID system using the RF Communication Technic and Energy Transformation Technic.