• ETRI Journal
• /
• 제39권3호
• /
• pp.353-363
• /
• 2017

Recently, sink mobility has been shown to be highly beneficial in improving network lifetime in wireless sensor networks (WSNs). Numerous studies have exploited mobile sinks (MSs) to collect sensed data in order to improve energy efficiency and reduce WSN operational costs. However, there have been few studies on the effectiveness of MS operation on WSN closed operating cycles. Therefore, it is important to investigate how data is collected and how to plan the trajectory of the MS in order to gather data in time, reduce energy consumption, and improve WSN network lifetime. In this study, we combine two methods, the cluster-head election algorithm and the MS trajectory optimization algorithm, to propose the optimal MS movement strategy. This study aims to provide a closed operating cycle for WSNs, by which the energy consumption and running time of a WSN is minimized during the cluster election and data gathering periods. Furthermore, our flexible MS movement scenarios achieve both a long network lifetime and an optimal MS schedule. The simulation results demonstrate that our proposed algorithm achieves better performance than other well-known algorithms.

• 대한기계학회논문집A
• /
• 제34권2호
• /
• pp.191-201
• /
• 2010

본 연구는 비스플라인 근사기법을 사용한 분지한계법 기반의 새로운 전역 최적화 알고리즘에 관한 것이다. 본 연구에서는 알고리즘 구성 요소 및 이들의 구현 내용에 관한 상세히 설명한다. 핵심 요소로서, 상호분리되는 부공간으로의 설계 공간의 분할 작업이 있고, 이들 분할 부공간의 한계값 계산 작업이 있는데, 이들 모두는 실수형 비스플라인 볼륨모델에 의해 구현된다. 본 연구 알고리즘은 다양한 테스트 문제들을 가지고 해의 정확성, 함수호출 회수, 알고리즘 수행시간, 메모리 사용량, 알고리즘 수렴성 등 그 계산 성능들을 평가한다. 이러한 평가 결과는 제안 알고리즘이 직관에 의존하지 않는 완전 알고리즘이며, 대용량의 최적화 문제에도 높은 가능성이 있음을 보여주는 것이다.

• Journal of Mechanical Science and Technology
• /
• 제19권4호
• /
• pp.947-957
• /
• 2005

In this study a simple model is developed that predicts impact damage in a composite laminate avoiding the need of the time-consuming dynamic finite element method (FEM). The analytical model uses a non-linear approximation method (Rayleigh-Ritz) and the large deflection plate theory to predict the number of failed plies and damage area in a quasi-isotropic composite circular plate (axisymmetric problem) due to a point impact load at its centre. It is assumed that the deformation due to a static transverse load is similar to that oc curred in a low velocity impact. It is found that the model, despite its simplicity, is in good agreement with FEM predictions and experimental data for the deflection of the composite plate and gives a good estimate of the number of failed plies due to fibre breakage. The predicted damage zone could be used with a fracture mechanics model developed by the second investigator and co-workers to calculate the compression after impact strength of such laminates. This approach could save significant running time when compared to FEM solutions.

• 한국정밀공학회지
• /
• 제31권9호
• /
• pp.777-782
• /
• 2014

Usually, railway axles are designed for infinite life based on endurance limit of the material and the axle is not fractured immediately when a surface crack initiated. The railway axles have been inspected regularly by NDT such as ultrasonic testing, magnetic testing and eddy current testing and so on. Because the axle failure is profoundly influenced by the probability of missing a fatigue crack during an NDT inspection, it is necessary to evaluate the Non Destructive Interval of railway axle. In the present paper, the Non Destructive Interval of railway axle based on fracture mechanics and finite element analysis was investigated. It was shown that the Non Destructive Interval of railway axle can be evaluated using fracture mechanics approach and extended using NDT which a crack can detect clearly.

• 디지털콘텐츠학회 논문지
• /
• 제6권1호
• /
• pp.1-5
• /
• 2005

이 논문에서는 OGSA 기반 그리드 서비스의 특징을 기술하고 서비스 데이터 요구(Service Data Element, SDE) 정보 수집을 위한 그리드 서비스를 기술한다. 그리드 서비스의 구성을 위해서는, 주요한 시스템 컴포넌트와 이들 간의 상호작용을 표현하는 시스템의 고수준의 소프트웨어 아키텍처로의 그리드 서비스를 구성하기 위한 체계적인 접근이 고려되어야 한다. 이 논문의 목적은 SDE를 수집단위로 하는 서비스 데이터 수집 서비스의 설계 및 구현으로 이를 위해 CR의 서비스 데이터 수집기 서비스를 자원 및 서비스의 종류에 따라 SDE를 영속적으로 유지할 수 있도록 저장 스킴을 구성하고 XML DBMS인 Xindice사용하여 확장하였다. 서비스 데이터 수집 서비스는 인터넷과 같은 광대역 환경에서의 효율적인 수행을 위해 통지 메커니즘에 의해 비동기적으로 작동한다.

• 한국컴퓨터정보학회논문지
• /
• 제21권7호
• /
• pp.1-8
• /
• 2016

Nowadays, distributed denial of service (DDoS) attacks on web sites reward attackers financially or politically because our daily lifes tightly depends on web services such as on-line banking, e-mail, and e-commerce. One of DDoS attacks to web servers is called HTTP-GET flood attack which is becoming more serious. Most existing techniques are running on the application layer because these attack packets use legitimate network protocols and HTTP payloads; that is, network-level intrusion detection systems cannot distinguish legitimate HTTP-GET requests and malicious requests. In this paper, we propose a practical detection technique against HTTP-GET flood attacks, based on the access behavior of inline objects in a webpage using NetFlow data. In particular, our proposed scheme is working on the network layer without any application-specific deep packet inspections. We implement the proposed detection technique and evaluate the ability of attack detection on a simple test environment using NetBot attacker. Moreover, we also show that our approach must be applicable to real field by showing the test profile captured on a well-known e-commerce site. The results show that our technique can detect the HTTP-GET flood attack effectively.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.606-611
• /
• 2000

It has been noted that the low frequency absorption coefficient of a porous sample placed in a standing wave tube is affected by the nature of the sample's edge constraint. The edge constraint has the effect of stiffening the solid phase of the sample, which itself can be strongly coupled to the material's fluid phase, and hence the incident sound field, by viscous means at low frequencies. In recent work it has also been shown that such a circumferential constraint causes the low frequency transmission loss of a layer of fibrous material to approach a finite low frequency limit that is proportional to the flow resistance of the layer and which is substantially higher than that of an unconstrained sample of the same material. However, it was also found that the benefit of the circumferential edge constraint was reduced in a transitional frequency range by a shearing resonance of the sample. Here it will be shown that the effect of that resonance can be mitigated or eliminated by adding additional axial and radial constraints running through the sample. It will also be shown that the constraint effect can be modeled closely by using a finite element procedure based on the Biot poroelastic theory. Implications for low frequency barrier design are also discussed.

• 대한전자공학회논문지SD
• /
• 제44권5호
• /
• pp.42-49
• /
• 2007

본 논문에서는 열전도 환경하의 MCM과 진공에서 작동하는 우주전자 장비의 신뢰도 최적화를 위한 부품 배치 연구에 관해 기술하고 있다. 최적배치를 위해 초기 부품 배치 후 FDM을 solver로 이용하여 부품의 접합온도를 계산하였으며 접합온도를 이용하여 전자장치의 신뢰도를 예측한 후 시뮬레이티드 어닐링 방법을 통해 신뢰도 최적배치 결과가 기술되었다. 시뮬레이티드 어닐링 적용 시 흔들기는 부품 치환방식을 이용하였으며 온도 감소계수 및 열 평형 계수의 변화에 따른 시뮬레이션 결과를 기술하였으며 특히 장치의 고장률 최소화 목적함수와 평균 접합온도 최소화 목적함수에 대해 각 적용결과에 대한 비교분석을 통하여 새로운 신뢰도 최적화 접근방법을 제안하였다.

• 한국멀티미디어학회논문지
• /
• 제17권4호
• /
• pp.506-513
• /
• 2014

In recent years, research on user's activity recognition using a smart phone has attracted a lot of attentions. A smart phone has various sensors, such as camera, GPS, accelerometer, audio, etc. In addition, smart phones are carried by many people throughout the day. Therefore, we can collect log data from smart phone sensors. The log data can be used to analyze user activities. This paper proposes an approach to inferring a user's physical activities based on the tri-axis accelerometer of smart phone. We propose recognition method for four activity which is physical activity; sitting, standing, walking, running. We have to convert accelerometer raw data so that we can extract features to categorize activities. This paper introduces a recognition method that is able to high detection accuracy for physical activity modes. Using the method, we developed an application system to recognize the user's physical activity mode in real-time. As a result, we obtained accuracy of over 80%.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2016년도 추계학술발표대회
• /
• pp.733-734
• /
• 2016

This study proposes a novel approach for ground segmentation of 3D point cloud. We combine two techniques: gradient threshold segmentation, and mean height evaluation. Acquired 3D point cloud is represented as a graph data structures by exploiting the structure of 2D reference image. The ground parts nearing the position of the sensor are segmented based on gradient threshold technique. For sparse regions, we separate the ground and nonground by using a technique called mean height evaluation. The main contribution of this study is a new ground segmentation algorithm which works well with 3D point clouds from various environments. The processing time is acceptable and it allows the algorithm running in real time.