• 제목/요약/키워드: Runner System

검색결과 187건 처리시간 0.03초

반용융 다이캐스팅 공정의 주조 방안 설계에 관한 연구 (A Study on the Design of Gating System for Semi-Solid Diecasting Process)

  • 권택환;문찬경;김영호;최재찬
    • 한국정밀공학회지
    • /
    • 제19권8호
    • /
    • pp.116-125
    • /
    • 2002
  • Semi-Solid Diecasters usually carry out the Semi-Solid diecasting experiments before producing new casts. At the Semi-Solid diecasting stages, the runner-gate part has been always repeatedly corrected, which leads to a tedious processing time and increased processing cost. A large amount of experience is essential in manual assessment and if the design is defective, much time and a great deal of efforts will be wasted in the modification of the die. In this study, design system has been developed based on design database. In addition, gate experiment for gating system design has been carried out to append the database. It is possible for engineers to make efficient gating system design of Semi-Solid diecasting and it will result in the reduction of expenses and time to be required. The detailed contents of the research are described in the followings.

차근육묘를 위한 자재 및 배지 종류가 토양환경과 '설향' 딸기 자묘의 생장에 미치는 영향 (Influence of Root Restriction Materials and Media on Soil Environment and Growth of Runner Plantlets during Propagation of 'Seolhyang' Strawberry)

  • 박갑순;채수천;오찬식;최종명
    • 원예과학기술지
    • /
    • 제33권4호
    • /
    • pp.511-517
    • /
    • 2015
  • '설향' 딸기 차근육묘에서 배지 및 차근자재의 종류가 자묘 생장에 미치는 영향을 구명하고자 본 연구를 수행하였다. 연구목적을 달성하기 위해 폴리에틸렌 필름이 차근자재인 조건에서 팽연왕겨, 사양토 및 양질사토 등 세 종류 배지가 자묘 생장에 미치는 영향을 밝혔다. 또한 폴리에틸렌 필름(PE), 부직포(NF), 유공비닐(PP) 및 방근시트(RPS)의 네 종류 차근자재를 설치하고 팽연왕겨를 배지로 충진한 후 배지의 함수량 및 근권온도 변화와 자묘의 생장에 미치는 영향도 구명하였다. 런너에서 발생한 자묘를 세 종류 배지에 고정시키고 20일 및 40일 후 조사한 자묘의 생장에서 팽연 왕겨 처리가 착근 20일 후의 엽 면적과 관부 직경, 그리고 40일 후의 관부 직경, 근중 및 생체중 등 지상부 및 뿌리 생육이 가장 우수하였다. 네 종류 차근 자재를 깔고 팽연왕겨를 충진한 후 관수 주기별 배지의 수분함량(volumetric water content, VWC)를 조사한 결과 PE 처리는 관수 후 55%로 측정된 VWC가 관수 직전 26%로 낮아졌으며, PP는 10-16%, NF 및 RPS는 관수 후 다음 관수까지 10% 미만의 VWC를 유지하였다. 육묘 기간 중 PE 처리가 NF, PP 및 RPS 처리보다 차근 자재에 영향을 받은 오후 2-5시 사이의 배지온도가 약 $1^{\circ}C$ 낮았고, 주 야간 온도차는 $1.5^{\circ}C$ 적었다. 자묘의 초장, 생체중 및 근 중은 PE 처리가 가장 크거나 무거웠다. NF 및 PP 처리는 뿌리가 차근되지 않아 자묘 뿌리가 차근자재 윗부분에 제한적으로 존재하지 못하고 자재 밑으로 많은 근계가 형성되었다. 이상과 같이 PE를 차근자재로 삼은 경우 팽연왕겨가 바람직한 배지이고, 차근 자재로써 PE가 NF, PP 및 RPS 보다 자묘의 생장에 더 우수한 영향을 미쳤으며, 본 연구 결과는 딸기 양질묘 생산을 위한 기초자료로 활용될 수 있을 것이다.

Potential Benefits of Intercropping Corn with Runner Bean for Small-sized Farming System

  • Bildirici, N.;Aldemir, R.;Karsli, M.A.;Dogan, Y.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제22권6호
    • /
    • pp.836-842
    • /
    • 2009
  • The objectives of this study were to evaluate potential benefits of intercropping of corn with runner bean for a smallsized farming system, based on land equivalent ratio (LER) and silage yield and quality of corn intercropped with runner bean (Phaseolus vulgaris L.), in arid conditions of Turkey under an irrigation system. This experiment was established as a split-plot design in a randomized complete block, with three replications and carried out over two (consecutive) years in 2006 and 2007. Seven different mixtures (runner bean, B and silage corn sole crop, C, 10% B+90% C, 20% B+80% C, 30% B+70% C, 40% B+60%C, and 50% B+50%C) of silage corn-runner bean were intercropped. All of the mixtures were grown under irrigation. The corn-runner bean fields were planted in the second week of May and harvested in the first week of September in both years. Green beans were harvested three times each year and green bean yields were recorded each time. After the 3rd harvest of green bean, residues of bean and corn together were randomly harvested from a 1 $m^{2}$ area by hand using a clipper when the bean started to dry and corn was at the dough stage. Green mass yields of each plot were recorded. Silages were prepared from each plot (triplicate) in 1 L mini-silos. After 60 d ensiling, subsamples were taken from this material for determination of dry matter (DM), pH, organic acids, chemical composition, and in vitro DM digestibility of silages. The LER index was also calculated to evaluate intercrop efficiencies with respect to sole crops. Average pH, acetic, propionic and butyric acid concentrations were similar but lactic acid and ammonia-N levels were significantly different (p<0.05) among different mixtures of bean intercropped with corn. Ammonia-N levels linearly increased from 0.90% to 2.218 as the percentage of bean increased in the mixtures up to a 50:50 seeding ratio. While average CP content increased linearly from 6.47 to 12.45%, and average NDF and ADF contents decreased linearly from 56.17 to 44.88 and from 34.92 to 33.51%, respectively, (p<0.05) as the percentage of bean increased in the mixtures up to a 50:50 seeding ratio, but DM and OM contents did not differ among different mixtures of bean intercropped with corn (p>0.05). In vitro OM digestibility values differed significantly among bean-corn mixture silages (p<0.05). Fresh bean, herbage DM, IVOMD, ME yields, and LER index were significantly influenced by percentage of bean in the mixtures (p<0.01). As the percentage of bean increased in the mixtures up to a 50:50 seeding ratio, yields of fresh bean (from 0 to 24,380 kg/ha) and CP (from 1,258.0 to 1,563.0 kg/ha) and LER values (from 1.0 to 1.775) linearly increased, but yields of herbage DM (from 19,670 to 12,550 kg/ha), IVOMD (from 12,790 to 8,020 kg/ha) and ME (46,230 to 29,000 Mcal/ha) yields decreased (p<0.05). In conclusion, all of the bean-corn mixtures provided a good silage and better CP concentrations. Even though forage yields decreased, the LER index linearly increased as the percentage of bean increased in the mixture up to a 50:50 seeding ratio, which indicates a greater utilization of land. Therefore, a 50:50 seeding ratio seemed to be best for optimal utilization of land in this study and to provide greater financial stability for labor-intensive, small farmers.

전동모터의 Rotor 성형을 위한 자동 주조기 개발 (Development of Auto Casting Machine for Rotor Molding of Electric Motor)

  • 이양창;이준성;이호정;배병규;최윤종
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2010년도 추계학술발표논문집 2부
    • /
    • pp.824-827
    • /
    • 2010
  • 본 논문은 전동형 모터의 Rotor의 자동 성형을 위한 자동화된 주조기 개발에 대한 결과이다. 개발된 자동화된 Rotor 전용 주조기는 수평형에 비해 금형의 크기가 약 1/2정도 이므로 금형 체결력이 반감되고, 기계 구조는 매우 작아진다. 그리고 Al용탕이 사출되는 과정에서 Spool -> Runner -> Gate -> Cavity(제품)에 이르기까지의 Runner를 최소화하여 재용융을 위한 에너지의 비용 절감을 할 수가 있다. 금형 구조가 간단하므로 금형비가 저렴하여 다품종 소량생산에 매우 유리하다. 개발제품은 수직형 구조로 알루미늄 용탕의 윗면의 공기가 금형의 유로 상측에 위치하므로 공기(gas)가 먼저 배출되어 사출(주조)후 Rotor 성형부에 남아 있는 기포가 최소화된다. 그러므로 충진도가 높아진다. Rotor 코아(규소강)가 크더라도 수직형은 금형내에 삽입(Inset)하기가 쉽고 또한, 제품의 착탈 부위와 사출부위가 다르기 때문에 작업성, 안전성이 우수하고 생산성이 매우 높다. 수직형은 충진 밀도가 매우 높고 밀도가 균일하기 때문 Rotor의 회전 소음, 진동에 대한 품질이 매우 우수하다. 따라서 고효율, 고품질의 전동모터 Rotor 제품 생산에 매우 효과적인 장비라 할 수 있다.

  • PDF

Overload Surge Investigation Using CFD Data

  • Flemming, Felix;Foust, Jason;Koutnik, Jiri;Fisher, Richard K.
    • International Journal of Fluid Machinery and Systems
    • /
    • 제2권4호
    • /
    • pp.315-323
    • /
    • 2009
  • Pressure oscillations triggered by the unstable interaction of dynamic flow features of the hydraulic turbine with the hydraulic plant system - including the electrical design - can at times reach significant levels and could lead to damage of plant components or could reduce component lifetime significantly. Such a problem can arise for overload as well as for part load operation of the turbine. This paper discusses an approach to analyze the overload high pressure oscillation problem using computational fluid dynamic (CFD) modeling of the hydraulic machine combined with a network modeling technique of the hydraulic system. The key factor in this analysis is the determination of the overload vortex rope volume occurring within the turbine under the runner which is acting as an active element in the system. Two different modeling techniques to compute the flow field downstream of the runner will be presented in this paper. As a first approach, single phase flow simulations are used to evaluate the vortex rope volume before moving to more sophisticated modeling which incorporates two phase flow calculations employing cavitation modeling. The influence of these different modeling strategies on the simulated plant behavior will be discussed.

다이캐스팅 모바일 기기의 기공결함 감소를 위한 유동구조 설계 (A Gating System Design to Reduce the Gas Porosity for Die Casting Mobile Device)

  • 장정희;김준형;한철호
    • 한국기계가공학회지
    • /
    • 제20권2호
    • /
    • pp.86-92
    • /
    • 2021
  • Usually, the die-cast components used in small mobile devices require finishing processes, such as computer numerically controlled coating. In such cases, porosity is the most important defect. The shape of the molten aluminum that passes through the runner and gate in a mold is the one of the factors that influences gas porosity. To define the spurt index, which numerically indicates the shape of molten aluminum after the gate, Reynolds number and Ohnesorge number are used. Before die fabrication, computer-aided engineering analysis is performed to optimize the filling pattern. Finally, X-ray and surface inspection are performed after casting and machining to evaluate how the spurt index affects porosity and other product parameters. Based on the results obtained herein, a new gating system design process is suggested.

종축소수력발전소의 인입수량과 드럼수위와의 관계에 관한 연구 (A Study on the Drum Water Level Versus Incoming Water Quantities for Small Vertical Hydraulic Water Turbine Plant)

  • 최규식;정주원
    • 한국항행학회논문지
    • /
    • 제18권3호
    • /
    • pp.254-260
    • /
    • 2014
  • 소수력발전방식 중에서 종축 소수력 발전기를 채용한 시스템에 대해서 드럼의 수위상승에 대한 연구를 수행하였다. 드럼통에 용수를 일정하게 공급할 경우, 시간의 경과에 따라 드럼통의 수위가 상승하기는 하지만 반면, 그 상승효과 때문에 증가되는 위치에너지에 의한 러너 측 유출속도와 유출량이 증가하여 수위상승을 억제하고 그 결과 수위상승이 어느 위치에 멈추게 되어 평형상태를 이루게 된다. 이 시스템의 개발 및 분석에 의하면 드럼통의 수위는 드럼통의 크기나 높이, 폭, 형, 러너의 형상 등과는 관계 없이 결정된다. 수위는 오직 인입수량과 유출수량에 의하여만 결정되고 이에 따라 출력전력도 유사한 거동을 보인다는 것이 밝혀졌다. 그러므로 인입수량이 많지 않으면 원하는 수준의 드럼수위를 유지할 수 없을 뿐만 아니라, 원하는 출력전력도 얻을 수 없다. 아울러 현재 국내 산업시설에 설치되어 시험 운전 중에 있는 종축소수력발전시스템에 대해서 이 방법을 적용 및 수행하여 이 기법의 타당성을 입증하였다.

다구찌의 강건설계 기법을 이용한 사출 성형품의 싱크 마크를 최소화하기 위한 사출성형 조건의 최적화 (Optimization of injection molding to minimize sink index with Taguchi's Robust Design technique)

  • 권윤숙;정영득
    • Design & Manufacturing
    • /
    • 제1권1호
    • /
    • pp.17-21
    • /
    • 2007
  • In the manufacture and processing of large plastic materials, product quality is tested and verified through several techniques such as injection processing, residual stress through injection molding and shrinkage. With regards to the injection molding process, common problems such as inconsistent density is seen when different points of the product are discovered to have varying thickness levels. Sink marks in product are then evident. This occurs when there is poor molding conditions caused about by poor runner and packaging systems incorporated into the process. We designed the runner system which is possible balanced filling to cavities using CAE program $Moldflow^{TM}$ and then obtained optimal processing conditions by Taguchi's Robust Design technique.

  • PDF

위성항법기반 철도 적용성 연구 (Study on the Applicability of GNSS Based Railway System)

  • 정락교;신경호
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2007년도 춘계학술대회 논문집
    • /
    • pp.1707-1713
    • /
    • 2007
  • If GNSS-based location information, expected to become the mainstream of the future technology, is applied to the future transportation, it will be of benefit to as follows; cost reducing effects on operating expanse and constructing expense due to decrease of ground unit installation, development of new technologies for train, or vehicle control system and becoming a front runner in the market. Therefore, this paper provides the minimum requirements for GNSS based system thru the studies on the applicability of GNSS based system to railway system, distinctions of the new technology between the existing technologies, and location accuracy.

  • PDF