• Korean Journal of Community Nutrition
• /
• v.2 no.2
• /
• pp.179-186
• /
• 1997

A new bioelectrical impedance method has been developed and evaluated. The electrodes; were made of stainless steel and electrical interfaces were created by an upright subject gripping hand electrodes and stepping onto foot electrodes. Eight tactile electrodes were in contact with surfaces of both hands and feet; thumb, palm and fingers, front sole, and rear sole. Automatic on-off switches were used to change current pathways and to measure voltage differences for target segments. Segmental body resistances and whole body resistance(RWHOLE)were measured in 60 healthy subjects. Segmental resistances of right arm(RRA), left arm(RLA), trunk(RT), right leg(RRL) and left leg(RLL)were310.0$\pm$61.6$\Omega$, 316.9$\pm$64.6$\Omega$, 25.1$\pm$3.4$\Omega$, 236.8$\pm$31.2$\Omega$ and 237.6$\pm$30.4$\Omega$, respectively. Individual segmental impedance indexes(Ht2/RRA, Ht2/RT, and Ht2 /RLA) were closely related to lean body mass(LBM)as measured by densitometry ranged from r=0.925 to 0.960. Ht2/(RRA+RT+RLA) predicted LBM slightly better(r=0.969) than the traditional index, Ht2/RWHOLE(r=0.964), supporting the accuracy of the segmental measurement. A multiple regression equation utilizing Ht2/RRA, Ht2/RT and Ht2/RRL predicted LBM with r=0.971. Ht2/RRA term of the regression contributed to more than 40$\%$ of the LBM prediction, indicating that lean mass of arm represented whole body LBM more closely than other body segments. The new bioimpedance method was characterized by upright posture, eight tactile electrodes, segmental measurements and utilization of electronic switches in comparison with the traditional method. The measurement with this new method was extremely reproducible, quick and easy to use.

• Composites Research
• /
• v.36 no.5
• /
• pp.349-354
• /
• 2023

Poly(3-hexylthiophene) (P3HT) is a conjugated polymer that is highly soluble in organic solvents and is readily available. However, its electrical properties as an active channel in electronic devices are not enough for practical applications, necessitating further improvement in the properties. In this study, we demonstrate that the blending of two P3HT polymers (i.e., regio-regular (RR) P3HT and regio-random (RRa) P3HT) with different regioregularities can significantly improve charge transport characteristics of the blend films. The morphological and electrical properties of the blend films were systematically investigated by varying the ratio between two P3HT polymers. Atomic force microscopy (AFM), X-ray diffraction (XRD), and UV-visible absorption spectroscopy (UV-vis) were employed to evaluate the morphological and optoelectronic properties of the blend films. The crystallinity of the blend films increased with increasing the content of RRa-P3HT to 20 wt% and gradually decreased as the content increased to 80%. Consistently, the highest charge carrier mobility was obtained from the blend films containing 20 wt% RRa-P3HT, which value was measured to be 0.029 cm²/V·s. The values gradually decreased to 0.0007 cm²/V·s with increasing the content of RRa-P3HT to 80 wt%.

• Journal of information and communication convergence engineering
• /
• v.5 no.2
• /
• pp.88-92
• /
• 2007

In this paper, an SS-RRA protocol that is based on Code Division Multiple Access is proposed and analyzed under the integrated voice and data traffic load. The backward logical channels consist of slotted time division frames with multiple spreading codes per slot. The protocol uses a reservation mechanism for the voice traffic, and a random access scheme for the data traffic. A discrete-time, discrete-state Markov chain is used to evaluate the performance. The numerical results show that the performance can be significantly improved by a few distinct spreading codes.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.813-816
• /
• 2013

National Radio Research Agency(RRA) has legislated technical regulations of telecommunication equipments. These technical regulations are related to safety of operators and users, service quality, accessibility for the disabled, interoperability and network connection of terminal equipment. Also, RRA drives the establishment or amendment of technical regulations for terminal equipment considering the evolution of ICT technicology and diversification of services. In 2013, RRA researched the amendment of technical regulations in relation to terminal equipment, which are related to the measurement frequency for signal band power, unwanted signal power, pulse shape.

• Korean Journal of Materials Research
• /
• v.10 no.7
• /
• pp.493-498
• /
• 2000

The effects of RRA treatment on the microstructures and mechanical properties of 7050 Al alloy were investigated by differential scanning calolimetry, transmission electron microscopy, microhardness measurement and electrical conductivity. The hardness of 2nd-step aged specimen at $175^{\circ}C$ was decreased to mimimum value and increased to a peak hardness, and then re-decreased with retrogression treatment. It was found that the hardness of 2nd-step aged specimen was further increased by 3rd step aging treatment($120^{\circ}C$x24h). The initial decrease in hardness during 2nd-step aging was due to the partial dissolution of pre-existing GP zone, the major precipitation hardening phase at T6 condition. It was confirmed that the major precipitation hardening phase at 3rd-step aging was GP zone and η' phase. The electrical conductivity increased continually through 2nd-step and 3rd-step aging treatment. It was conclude that the optium 2nd-step aging condition was at $175^{\circ}C$ for 50min by considering the hardness and electrical conductivity.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.820-823
• /
• 2011

WSN is composed of a lot of small sensors with the limited hardware resources. In WSN, at the initial stage, sensor nodes are randomly deployed over the region of interest, and self-configure the clustered networks by grouping a bunch of sensor nodes and selecting a cluster header among them. In this paper, we propose a self-configuration routing protocol for WSN, which consists of step-wise ripple routing algorithm for initial deployment, effective joining of sensor nodes. RRA is search node in RF-coverage of each node, which result in fast network connection, reducing overall power consumption, and extending the lifetime of network.

• Corrosion Science and Technology
• /
• v.15 no.4
• /
• pp.159-165
• /
• 2016

An attempt has been made to understand the influence of retrogression and re-aging (RRA) on the exfoliation corrosion behaviour of AA 7085 alloy in comparison with the peak aged condition (PA). Immersion tests using ASTM G34 and studies involving electrochemical impedance spectroscopy showed that the RRA treated alloy provided higher resistance to exfoliation corrosion than the PA treated alloy. The improved resistance was attributed to the enhanced Cu content and the discontinuous nature of the grain boundary precipitate, which was revealed through transmission electron microscopy.

• Journal of KIISE:Information Networking
• /
• v.29 no.3
• /
• pp.253-264
• /
• 2002

Recently, hierarchical architectures of databases for location management have been proposed in order to accommodate the increase in user population in future personal communication systems. In particular, a 3-level hierarchical database architecture is compatible with current cellular mobile systems. In the architecture, a newly developed additional databases, regional location database(RLR), are positioned between HLR and VLRs. We propose an efficient cache scheme, called the Double T-thresholds Location Cache Scheme. The cache scheme extends the existing T-threshold location cache scheme which is competent only under 2-level architecture of location databases currently adopted by IS-41 and GSM. The idea behind our scheme is to use two pieces of cache information, VLR and RLR serving called portables. The two pieces are required in order to exploit root only locality of registration area(RA) but also locality of regional registration area(RRA) which is the wide area covered by RLR. We also use two threshold values in order to determine whether the two pieces are obsolete. In order to model the RRA residence time, the branching Eralng-$\infty$ distribution is introduced. Our minute cost analysis shows that the double T-threshold location cache scheme yields significant reduction of network and database costs for molt patterns of portables.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.15
• /
• pp.6443-6447
• /
• 2014

Background: To determine the predictive value of the baseline stimulated thyroglobulin (STg) level for ablation outcome in patients undergoing adjuvant remnant radioiodine ablation (RRA) for differentiated thyroid carcinoma (DTC). Materials and Methods: This retrospective study accrued 64 patients (23 male and 41 female; mean age of $40{\pm}14$ years) who had total thyroidectomy followed by RRA for DTC from January 2012 till April 2014. Patients with positive anti-Tg antibodies and distant metastasis on post-ablative whole body iodine scans (TWBIS) were excluded. Baseline STg was used to predict successful ablation (follow-up STg <2 ng/ml, negative diagnostic WBIS and negative ultrasound neck) at 7-12 months follow-up. Results: Overall, successful ablation was noted in 37 (58%) patients while ablation failed in 27 (42%). Using the ROC curve, a cut-off level of baseline STg level of ${\leq}14.5ng/ml$ was found to be most sensitive and specific for predicting successful ablation. Successful ablation was thus noted in 25/28 (89%) of patients with baseline STg ${\leq}14.5ng/ml$ and 12/36 (33%) patients with baseline STg >14.5 ng/ml ((p value <0.05). Age >40 years, female gender, PTS >2 cm, papillary histopathology, positive cervical nodes and positive TWBIS were significant predictors of ablation failure. Conclusions: We conclude that in patients with total thyroidectomy followed by I-131 ablation for DTC, the baseline STg level is a good predictor of successful ablation based on a stringent triple negative criteria (i.e. follow-up STg < 2 ng/ml, a negative DWBIS and a negative US neck).

• Journal of electromagnetic engineering and science
• /
• v.18 no.2
• /
• pp.78-87
• /
• 2018

This paper describes specular reflectance measurements of dielectric plates in three waveguide frequency bands: D-band (110-170 GHz), G-band (140-220 GHz), and J-band (220-325 GHz). The transmit (Tx) part of the proposed specular reflectance measurement system is stationary, while the receive (Rx) part and the material under test (MUT) holder are concentric-rotating with a 2:1 speed ratio for specular reflectance measurements. In specular reflectance measurements, the first step measures the specular reflection coefficients of an MUT and a metal plate on the MUT holder located at the center of the Tx and Rx parts, and the second step calculates the specular reflectance defined by the specular reflection power (i.e., intensity) of the MUT normalized to that of the metal plate. Multiple reflection effects between the Tx and Rx antennas and the MUT on the measured specular reflectance are minimized by averaging out the multiple specular reflectances measured with changing the separation distance between the two antennas by ${\lambda}/8$ intervals. Measurement results of the perpendicular-polarized specular reflectance of commonly used dielectric plates are verified by comparing those with the analytic results and show that the results measured over the overlapped frequency range of the D-/G-bands and at the boundary frequency of the G-/J-bands agree well with the results for the other band, respectively.