• Membrane and Water Treatment
• /
• v.14 no.2
• /
• pp.85-93
• /
• 2023

Membrane separation is widely used for several applications such as water treatment, membrane reactors and climate change. Cross-linked organic-inorganic hybrid polyvinylidene fluoride (PVDF) / Tetraethyl orthosilicate (TEOS) was adopted for the preparation of optimized hollow membrane (HFM) for membrane distillation or other low pressure separators for mechanical properties and permeability under varying pretreatment schemes. HFMs were prepared on semi-pilot membrane fabrication system. Novel adopted post-treatment schemes involved soaking in glycerol, magnesium sulphate (MgSO₄), sodium hypochlorite (NaOCl), and isopropanol for different durations. All fibers were characterized for morphology using a scanning electron microscope (SEM), surface roughness using atomic force microscope (AFM), elemental composition by examining Energy Dispersive Spectroscopy (EDS), water contact angle (CA°) and porosity. The performance of the fibers was evaluated for pure water permeation flux (PWF). Post-treatment with MgSO₄ gave the highest both tensile modulus and flux. Assessment of properties and performance revealed comparable results with other organic-inorganic separators, HF or flat. In spite of few reported data on post treatment using MgSO₄ in presence of TEOS, this proves the potential of low cost treatment without negative impact on other membrane properties. The flux is also comparable with hypochlorite which manifests substantial precaution requirements in actual industrial use.The relatively high values of flux/bar for sample treated with TEOS, post treated with MgSO₄ and hypochlorite are 88 and 82 LMH/bar respectively.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.1
• /
• pp.44.2-45
• /
• 2021

As implied by the zodiacal light and spacecraft impact measurements, the space between large bodies in our Solar System is filled with interplanetary dust particles (IDPs). IDPs give us deeper insight into the composition and evolution of the Solar System, as well as being a crucial reference for extrasolar research. IDPs can be interpreted as bearers of carbon and organic materials, and thus, their interaction with Earth can be considered as important factors for the birth of terrestrial life. One of the key routes of IDPs entering Earth is via meteoroid streams (Love and Brownlee 1993). The Geminid meteoroid stream is a notable example. Together with its source asteroid (3200) Phaethon, the Phaethon-Geminid stream complex (PGC) (Whipple 1983; Gustafson 1989) can potentially provide information on the properties and evolution of IDPs in near-Earth space. DESTINY+* is a JAXA/ISAS spacecraft planned to launch in 2024 to explore the physical and chemical features of near-Earth IDPs and uncover the dust ejection mechanism of active near-Earth asteroids, especially Phaethon (Arai et al. 2018). Previous studies on the dust ejection mechanism of Phaethon have various degrees of success in explaining the ejection of submillimeter particles and try to recreate the dust replenishment rate of the Geminid stream. However, none of them are satisfactory for explaining the observed Geminid stream, especially for larger particles of a millimeter and centimeter scales. Inspired by the discovery of rotational mass shedding in the Main Belt region (Jewitt et al., 2014), we investigate a dust ejection scenario by rotational instability on Phaethon. Using the N-body integrator MERCURY6 (Chambers 1999; modified by Jeong 2014), we performed a long-term integration of dust particles of various sizes ejected at ~1 m/s. Through this process, we discuss the implications Phaethon's rotation may have on its ejection, the formation and evolution of IDP by this mechanism, and contribute to the DESTINY+ mission.

• Korea Science and Art Forum
• /
• v.20
• /
• pp.159-171
• /
• 2015

Service elements are added to the product to improve the company it its sales and innovation. The servitization process could take many different routes reflecting various properties of the manufacturing firm and its business contexts. Product-service systems (PSS) design method developed at Sungkyunkwan Universty, Service Design Institute, has been applied to a small furniture manufacturing company to demonstrate the utility of the method and to devise improvements. First, the business context of the company has been analyzed and key values have been identified. A co-creative session has been conducted to develop initial service concepts to drive those key values. The diverse positioning of those service concepts on the scale of service supporting product and service support customer is then developed to plan servitization phases. The specific service concepts are about company-customer relationship building as well as customization and personalization in this case. Initial service concepts are detailed with service blueprint so that prototyping and customer experience evaluation can be done. Business models in different servitization phases are designed. Further prototyping and customer experience evaluation has been done with business strategy improvements. In this paper, the proudct-service systems design method has been reviewed and the specific and real processes of the servitization using design will be described with discussion on the improvement of the method and the enhancement of the business.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.94-96
• /
• 2021

Software-Defined Networking (SDN), which has emerged to overcome the limitations of existing network architectures, makes routing management simpler and more efficient through a central controller. SR (Segment Routing) is a flexible and scalable way of doing source routing, and defines the information path of the network through a list of segments arranged in the packet header. In an SDN environment, the performance of each router is almost the same, but packets tend to be concentrated on routes that are frequently used depending on routing algorithms. Routers in that path have a relatively high frequency of failure and are more likely to become bottlenecks. In this paper, we propose a routing algorithm that allows the router, which is a resource in the network, to evenly process packets in the SDN with SR, so that the administrator can utilize the resources in the network without idle routers, and at the same time facilitate the management of the router.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.260-262
• /
• 2021

In recent years, many studies are being conducted to reduce the damage to humans in the event of a fire. In case of fire in large cities, evacuation route guidance services are provided using Mobile GIS (geographic information system). However, among the algorithms used in the existing evacuation route system, Dijkstra Algorithm has a problem that when the cost is negative, it cannot obtain an infinite loop or an accurate result value, and does not help to select an appropriate shortest route by searching all routes. For this reason, in this paper, we propose the shortest route guidance system based on A^* Algorithm. In case of fire, the shortest route is searched and the shortest route is visualized and provided using a map service on a mobile device using mobile GIS.

• Molecules and Cells
• /
• v.46 no.6
• /
• pp.329-336
• /
• 2023

Reactive oxygen species (ROS) serve as secondary messengers that regulate various developmental and signal transduction processes, with ROS primarily generated by NADPH OXIDASEs (referred to as RESPIRATORY BURST OXIDASE HOMOLOGs [RBOHs] in plants). However, the types and locations of ROS produced by RBOHs are different from those expected to mediate intracellular signaling. RBOHs produce O₂^•- rather than H₂O₂ which is relatively long-lived and able to diffuse through membranes, and this production occurs outside the cell instead of in the cytoplasm, where signaling cascades occur. A widely accepted model explaining this discrepancy proposes that RBOH-produced extracellular O₂^•- is converted to H₂O₂ by superoxide dismutase and then imported by aquaporins to reach its cytoplasmic targets. However, this model does not explain how the specificity of ROS targeting is ensured while minimizing unnecessary damage during the bulk translocation of extracellular ROS (eROS). An increasing number of studies have provided clues about eROS action mechanisms, revealing various mechanisms for eROS perception in the apoplast, crosstalk between eROS and reactive nitrogen species, and the contribution of intracellular organelles to cytoplasmic ROS bursts. In this review, we summarize these recent advances, highlight the mechanisms underlying eROS action, and provide an overview of the routes by which eROS-induced changes reach the intracellular space.

• Journal of the Korean Society of Food Culture
• /
• v.24 no.6
• /
• pp.677-691
• /
• 2009

In this study, the symbols and visual expressions employed in the food culture content of official website designed to promote three cities in Korea, Seoul, Jeonju and Jeju, were subjected to semiotic analysis. In this study, it was assumed that these websites reflected the varying perspectives of the people behind the development and management of these routes of Internet communication, and the semiotic choices made in order to exemplify each city's food cultural image. The aim of the study was to analyze the communication strategies of food cultural branding in the terms of the online content regarding Seoul, Jeonju, and Jeju with a focus on the comparative points in these cities' official websites. This study included conducting semiotic content analyses of the aforementioned cities' official web pages in an attempt to determine the food branding strategies used to differentiation and produce more favorable perceptions of these three cities. Building upon the findings drawn from this comparative study, the present work can be used to determine more effective ways of strategically differentiating the images of local food culture associated with these cities from the view of brand communications. This study also demonstrates viable directions for designing web content for a city where the food cultural messages can be delivered in a thoughtful and effective manner.

• Journal of Radiation Protection and Research
• /
• v.48 no.2
• /
• pp.84-89
• /
• 2023

Background: Food consumption is one of the most important routes for radionuclide intake for the public; therefore, there is the need to have a comprehensive understanding of the amount of radioactivity in food products. Consumption of radionuclide-contaminated food could increase potential health risks associated with exposure to radiation such as cancers. The present study aims to determine radioactivity levels in some food products (milk, rice, sugar, and wheat flour) consumed in Mali and to evaluate the radiological effect on the public health from these radionuclides. Materials and Methods: The health impact due to ingestion of radionuclides from these foods was evaluated by the determination of activity concentration of radionuclides ²³⁸U, ²³²Th, ⁴⁰K, and ¹³⁷Cs using gamma spectrometry system with high-purity germanium detector and radiological hazards index in 16 samples collected in some markets, mall, and shops of Bamako-Mali. Results and Discussion: The average activity concentrations were 9.8±0.6 Bq/kg for ²³⁸U, 8.7±0.5 Bq/kg for ²³²Th, 162.9±7.9 Bq/kg for ⁴⁰K, and 0.0035±0.0005 Bq/kg for ¹³⁷Cs. The mean values of radiological hazard parameters such as annual committed effective dose, internal hazard index, and risk assessment from this work were within the dose criteria limits given by international organizations (International Commission on Radiological Protection and United Nations Scientific Committee on the Effects of Atomic Radiation) and national standards. Conclusion: The results show low public exposure to radioactivity and associated radiological impact on public health. Nevertheless, this study stipulates vital data for future research and regulatory authorities in Mali.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.20 no.4
• /
• pp.143-157
• /
• 2009

The purpose of this study is to provide the basic data for architectural planning of the library building for preserving ancient documents through analysis of the spatial composition(facility program, area ratio, space zoning, circulation system). This study suggests an outcome as follows. First, The facility program of the archives is composed with four kind functional area ; collection area, user area, administrative/management area, and service/public area ; Second, through the case studies, it was proven that more space was given to the collection area such as the preservation part when compared to other areas(39~56%). Third, there are some traits found based on the location of the stack room of the specialized libraries, the location of the preservation department, and the existence of the loading and unloading area. Fourth, it shows that the organization is related to the movement routes.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5D
• /
• pp.731-738
• /
• 2006

Facing congestion, people want to know traffic information about their routes, especially real-time link travel time (LTT). In this paper, as a sequel paper of the previous non-taxi based LTT generating study by Choi et al. (1998), taxi based GPS probes have been tried to produce LTT for urban arterials. Taxis in itself are good deployment mode of GPS probes although it by nature experiences boarding and alighting time noises which should be accounted. A heuristic real-time dynamic outlier filter algorithm for taxi GPS probe has been developed focusing on urban arterials. An actual traffic survey for dynamic link travel times has been conducted using license plate method for the test arterials of Seoul city transportation network. With the algorithm, it is estimated that 70% of outliers have been filtered and the relative error has been improved by 73.7%. The filtering algorithm developed here would be expected to be in use for other spatial sites with some calibration efforts. Some limitations and future research agenda have also been discussed.