• 해양환경안전학회지
• /
• 제24권2호
• /
• pp.246-252
• /
• 2018

본 논문은 3차원 축대칭 몰수체에 대해 소스 코드가 공개된 OpenFOAM 4.0을 이용하여 첫 번째 격자의 높이와 레이놀즈 수에 따른 마찰저항 변화에 대해 연구하였다. 마찰저항 계산을 위해 경계조건, 수치조건을 정립하였다. 축대칭 물체의 3차원 효과로 인해 거칠기가 매우 작은 $12{\mu}m$에서도 부드러운 표면과 비교해 마찰저항이 다르게 계산되었다. 레이놀즈 수가 커질수록 경계층의 두께 증가가 감소되었으며 이로 인해 마찰저항의 증가량이 감소되었다. 첫 번째 격자의 크기인 y+에 대한 영향에 대해서도 검토하였다. 첫 번째 격자가 log layer에 위치하고 있지 않으면 마찰저항과 표면의 전단력이 과도하게 예측되는 것을 확인하였다. 이는 경계층이 두껍게 예측되어 난류에너지가 과도하게 예측되었기 때문으로 판단된다. 표면의 거칠기가 커질수록 경계층이 두꺼워지고 표면의 난류에너지가 증가되는 것을 확인하였다. 마찰저항을 정확하게 예측하기 위해서는 y+ 값, 거칠기 및 벽함수가 적절한 영역에 위치해야 함을 알 수 있었다.

• 한국음향학회지
• /
• 제23권5호
• /
• pp.362-369
• /
• 2004

수층과 사질 퇴적층이 이루는 경계면이 평탄할지라도 고주파수 (30∼120 ㎑) 음파의 반사손실은 퇴적물의 입도와 입사파의 파장에 따라 거친 경계면에서의 반사 효과를 갖게 된다. 경계면 거칠기 영향은 음향학적 거칠기 (acoustical roughness, g/sub R/)로 표현하며 사질 퇴적물의 경우 g/sub R/∼ O(1)이고 주파수에 따른 종속성을 가진다. 따라서 입도분포에 따른 반사손실의 편차 (deviation)와 주파수에 따른 종속성을 포함하는 개선된 해저면 반사손실 모델 (HYBRL 모델, Hanyang University Bottom Reflection Loss model)을 제안한다. 그리고 주파수 종속성과 해저면 물성이 갖는 편차를 포함하는 반사손실 모델을 검증하기 위해 수조실험과 해상실험을 실시하였다. 수조실험 및 해상실험에서 측정된 해저면 반사손실 결과 사질 퇴적물에서 모델의 특성을 잘 반영한다.

• 한국진공학회지
• /
• 제20권2호
• /
• pp.93-99
• /
• 2011

금속 전극 위에 유기물 채널을 증착하여 만드는 바닥 전극 구조의 유기물 박막 트랜지스터에서 전극 표면이 거친 정도에 따라 전하 주입이 어떻게 달라지는지 조사했다. 금 전극을 실리콘 기판에 증착하고, 가열하여 금 전극 표면을 거칠게 만들었다. 그리고 펜터신과 상부 전극으로 사용할 금 전극을 차례대로 증착하여 금 전극/펜터신/금 전극 구조를 만들었다. 펜터신 증착 초기에는 거친 금 전극 위에서 펜터신 증착핵이 더 많이 보였지만, 막이 두꺼워지면 가열되지 않은 전극과 가열로 거칠어진 전극에서 펜터신 표면 모양에 차이가 거의 없었다. 온도를 바꾸면서 측정한 전류-전압 곡선은 바닥 전극의 표면이 거칠수록 바닥계면의 전위장벽이 높음을 보여주었다. 이 현상은 금속 표면이 거칠수록 일함수가 낮아지며 펜터신과 거친 전극 표면의 경계에 전하 트랩이 더 많기 때문으로 생각된다.

• Tribology and Lubricants
• /
• 제16권6호
• /
• pp.455-460
• /
• 2000

The real area of contacts, average film thickness, mean real pressure, and mean hydrodynamic pressure are investigated numerically in this study, especially for the parallel thrust bearing. Model surface is generated numerically with given autocorrelation function and some surface profile parameters. Then the average Reynolds equation contained flow factors and contact factor is applied to predict the effects of surface roughness in mixed lubrication regimes. In this equation, flow factors are defined as correction terms to smooth out high frequency surface roughness and contact factor is introduced to relieve from obtaining the average film thickness. Therefore the computation time to obtain barh h can be reduced.

• 상하수도학회지
• /
• 제19권5호
• /
• pp.613-618
• /
• 2005

In analysis of pipelines or pipe network we calculated the friction loss using Hazen-Williams or Manning formula approximately, or found one by friction coefficient from Moody diagram graphically. The friction coefficient is determined as a function of relative roughness and Reynolds number. But the calculated friction coefficient by Hazen-Williams or Manning formula considered roughness of pipe or velocity of flow. The friction coefficient in Darcy-Weisbach equation was obtained from the Moody diagram. This method is manual and is not exact from reading. This paper is presented numerical solution of Colebrook-White formula including variables of relative roughness and Reynolds number. The suggested subroutine program by an efficient linear iteration scheme can be applied to any pipe network system.

• 한국대기환경학회지
• /
• 제2권1호
• /
• pp.23-31
• /
• 1986

Meteorological Measurement was performed for evaluation of the horizontal vertical standard deviation $(\sigma_y, \sigma_z)$, surface roughness length and stmospheric stability during the period of March to October 1985 The major results are as follows; 1) The average value of surface roughness length was 144cm at NEPI. 2) In frequency distribution of atmospheric stability, neutral state (D class) was dominent in Seoul (29%) and Pusan (30%). Unstable states (A. B. C. class) were 26% in Seoul and 24% in Pusan. Also, stable states (D. E. F class) were 74% in Seoul and 76% in Pusan. 3) Standard deviations of horizontal ad vertical direction were evaluated as a function of downwind distance and atmospheric stability at NEPI, Jamsil and Pujeondong (Pusan). Standard deviation of horizontal direction was largest at NEPI among 3 areas because of mechanical turbulence resulting from difference of surface roughness length.

• Tribology and Lubricants
• /
• 제7권2호
• /
• pp.67-74
• /
• 1991

The contact characteristics of gear tooth surface were studied by using the gear test rig of power circulation type. The effect of surface treatment conditions and revolutions on the tooth surface roughness parameters, and the relations between the lubrication conditions and tooth surface conditions, in spur gear sets wear considered. The result show that heat treatment of gear have an important effect upon fatigue strength and tooth surface conditions, and surface asperities undergo a circulating process of creation and destruction because of the influnce of plastic deformation. And surface roughness conditions at the tooth tips accompany a great deal of variation in running-in stage. According to the lubrication analysis and the study the tooth surface have a greater effect on surface demage than lubrication conditions, in mixed-lubrication condition.

• 상하수도학회지
• /
• 제20권3호
• /
• pp.357-366
• /
• 2006

In order to compute pressure variation for a water distribution system, an expression for the friction factor as a function of Reynolds number and the relative roughness needs to be properly incorporated in computational algorithm. Considering Moody s friction variation, Developed Unsteady Network Analyzer (UNA) has been modified to match computational results with EPANET 2.0. Substantial improvement can be found in the application of Improved UNA to both an hypothetical pipeline network and a real system located in Ulsan City. Random number generator is employed to represent the uncertainty of water use in real pipeline network. Comparisons of application between EPANET 2.0 and improved UNA 2.0 indicate advantages and potentials of this approach.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.494-505
• /
• 2006

In this study, using constant normal stiffness(CNS) direct shear tests, side shear load distribution were analyzed by the influencing parameters of unconfined compressive strength, surface roughness, confining stress, and material properties. Based on the CNS tests, side shear load transfer function of drilled shafts in rock is proposed using geological strength index(GSI), which indicates discontinuity and surface condition of rock mass in Hoek-Brown criterion. Though comparisons with results of nine drilled shafts's load tests, it is found that the load-transfer curve by this study is in good agreement with the general trend observed by in situ measurements, and thus represents a significant improvement in the prediction of bearing capacity of drilled shaft.

• 대한기계학회논문집
• /
• 제18권6호
• /
• pp.1483-1495
• /
• 1994

A quantitative analysis of a surface roughness for a precision machining of a sculptured surface in milling process is treated under superposition theory in this paper. The geometrical surface rouhgness is calculated as a function of feed per tooth, path interval, radii of tool and cutting edge, and radii of curvatures of workiece. Through machining experiments in a 3-axis machining center, we confirmed the adequacy of the adequacy of the analysis. While cutter mark is neglegible in ball endmilling, it is significant in flat endmilling. When feed per tooth is very small, flat endmilling gives superior finish to ball endmilling. In flat endmilling, cutting condition and cutter path should be strategically chosen to balance the cutter mark height and cusp height.