• 대한기계학회논문집
• /
• 제18권10호
• /
• pp.2706-2711
• /
• 1994

In this work, an experimental type of torque converter has been constructed and its characteristics have been evaluated by adapting an electrorheological fluid(ERF) as an operating medium. The device was designed by using the equations which were proposed by Carlson et al. The correlation between the rheological behaviour of an ERF and mechanical parameters of the clutch has been investigated. The torque generated by an ERF in this device is sum of one due to the yield strength by polarizing dispersed particles in dielectric oil and one due to the viscous drag. The experimental results are presented in terms of torque and current density as a function of rotational speed at various electric field strength applied. Experimental results showed that the measured torque was rapidly increased with the increase of the electric field, generally being proportional to the rotational speed of the motor. The measured current was shown to be increased with the increased electric field. Also, the current was decreased with the increase of increased with the increased electric field. Also, the current was decreased with the increase of the rotational speed of the motor and reached plateau region after f = 5 Hz.

• Journal of Oral Medicine and Pain
• /
• 제30권4호
• /
• pp.411-426
• /
• 2005

이갈이나 이악물기 시 근활성, 하악의 이동, 악관절에 가해지는 부하, 그리고 교합에 미치는 영향 등에 대한 연구는 많았으나 하악운동에 미치는 영향에 대해서는 연구가 적었다. 따라서 측두하악장애의 주요한 기여요인으로 간주되는 이악물기나 강한 씹기에 의해 나타나는 하악의 미세한 운동양태에 대해서는 더 많은 연구가 수행될 필요가 있으며, 이에 본 연구에서는 하악의 비틀림 회전운동을 중심으로 이악물기 및 강한 씹기의 영향을 조사하였다. 저작계 이상이 없는 건강한 남자 14명을 선정하여 교합고경 및 형태의 변화와 수의적 이악물기 수준의 차이가 이악물기 및 씹기 운동 시 나타나는 하악의 비틀림 회전운동(torque rotational movement)에 미치는 영향을 조사하였다. 각 교합조건과 이악물기 힘에서의 씹기 운동은 먼저 나무젓가락(분리기)이 없는 한 번의 이악물기와 나무젓가락을 구치부에 위치시킨 상태에서 두 번에 걸친 씹는 운동 등 세 번의 하악운동으로 구성되었다. 본 연구의 결론은 다음과 같다. 1. 좌측으로 씹을 때와 우측으로 씹을 때 간에 전두면 및 시상면상 운동거리는 두 가지 이악물기 힘 모두에서 차이가 없었으나 하악의 운동속도는 다른 양상을 보여 강한 이악물기에서는 차이가 없었으나 약한 이악물기에서는 좌측으로 씹을 때 우측에 비해 속도가 다소 빠른 경향을 보였다. 이때 하악의 비틀림 회전운동각은 두 가지 이악물기 모두에서 전두면상 차이는 거의 없었으나 수평면상 각도에서는 씹는 측에 따라 차이가 있는 경향을 보였다. 2. 이악물기 힘의 차이는 전두면 및 시상면상 운동거리와 속도에 영향을 미쳐 강한 씹기에서 약한 씹기에 비해 측정치가 크게 나타났으며 하악의 비틀림 회전운동각 역시 강한 씹기에서 수평면상 운동각이 다소 증가된 양상을 보였다. 3. 전두면 및 시상면상 개구거리는 교합조건에 따른 차이를 보였는데, 즉 웨이퍼나 레진블록 등 교합고경이 높은 교합형태일수록 운동거리가 감소하였으며, 이때 강한 씹기에서는 운동속도 역시 유사한 양상으로 감소하였다. 그러나 하악의 비틀림 회전운동각은 전두면 및 수평면 모두에서 교합조건에 따른 차이를 거의 나타내지 않았다. 4. 세 번의 씹는 운동에서 분리기가 없는 경우에 비해 있는 경우에서 대체로 전두면상 회전운동각을 제외한 나머지 하악의 비틀림 회전운동량은 모두 증가하는 양상을 보였다. 그러나 이때 각 교합형태 간 동일항목의 비교에서는 전두면상 회전운동거리가 이악물기 힘에 따른 차이를 보여 약한 이악물기에서 유의한 변화를 나타내었다. 이상의 연구를 통해 하악 비틀림 회전운동의 전체적인 양상은 관찰면에 따라 다르게 나타나 이악물기 힘에 따른 차이는 전두면에 비해 수평면상 측정치가 더 많이 변화되는 모습을 보였으나 교합조건에 따른 양상은 관찰면 간 차이를 보이지 않았다. 한편 이악물기 및 씹는 운동 각각에서의 하악 비틀림 회전운동량은 교합조건이나 이악물기 힘에 관계없이 대체로 분리기 씹기에 의해 수평면상 회전운동량의 변화가 전두면상 측정치에 비해 더 유의하게 나타났다.

• Journal of Oral Medicine and Pain
• /
• 제25권4호
• /
• pp.383-394
• /
• 2000

This study was performed to investigate the effect of change of body posture on the rest position and the rotational torque movement of the mandible. Thirty dental students without any signs and symptoms of temporomandibular disorders and with natural dentition were selected for this study. Cervical inclination and the amount of the mandibular movement on protrusion, on left and right excursion, and on tapping in three body postures such as sitting position, supine position without pillow, and supine position with pillow were measured by goniometer, Cervical-Range-of-$Motion^{(R)}$, and mandibular tracking device, $BioEGN^{(R)}$ with $Rotate!^{(R)}$ program. The data obtained were classified and processed according to body posture and type of lateral guidance with SPSS windows program and the results were as follows: 1. There was significant difference among the three cervical inclinations by body postures. 2. Comparison of mandibular rest positions among body postures showed significant difference only for lateral distance in frontal plane, but comparison between before and after swallowing showed significant difference except for the lateral distance, vice versa. 3. Distance and amount of the rotational torque movement on protrusion and/or lateral excursions didn't show any difference by body posture. But by both body posture and lateral guidance type, there were slightly significant difference for some items. 4. A significant difference was shown for the rotational torque movement in frontal plane on tapping by body postures, for the lateral distance in frontal plane on sitting position by lateral guidance type, and for the rotational torque movement in frontal plane by both body posture and lateral guidance type.

• Journal of Oral Medicine and Pain
• /
• 제22권2호
• /
• pp.207-217
• /
• 1997

This study was performed for Investigation of the magnitude of mandibular positional change in maximum mouth opening. protrusion, lateral excursion, gum and peanut chewing with BioPAK system(Bioresearch Inc. USA) which can analyze mandibular rotational torque movements. For this study 17 female patients with Temporomandibular joint(TMJ) closed lock and 18 female control without any Temporomandibular disorders(TMDs) signs and premature occlusal contact were included. The obtained results were as follows : 1. In maximum mouth opening, the mandibular rotational angle and distance of patients were significantly greater than those of control group in horizontal plane(P<0.05). 2. In protrusion, the mandibular rotational angle and distance of patients were significantly greater than those of control group in frontal and horizontal plane(P<0.01, P<0.05). 3. The mandibular rotational angle and 야stance in lateral excursion to affected side of patients were significantly greater than those in lateral excursion to non-affected side in frontal plane(P<0.05). 4. The mandibular rotational angle in gum chewing to affected side of patients was significantly greater than that in gum chewing to non-affected side in frontal plane. 5. The mandibular rotational angle and distance in peanut chewing to affected side of patients were significantly greater than those in peanut chewing to non-affected side in frontal and horizontal plane. 6. The mandibular rotational angle and distance in peanut chewing to affected side of patients were greater than those in gum chewing, and was the same result in control group in frontal and horizontal plane.

• Wind and Structures
• /
• 제38권5호
• /
• pp.341-354
• /
• 2024

This paper presents a theoretical method to deal with the aerodynamic performance and pitch optimization of the horizontal axis wind turbine blades at low wind speeds. By considering a blade element, the functional relationship among the angle of attack, pitch angle, rotational speed of the blade, and wind speed is derived in consideration of a quasi-steady aerodynamic model, and aerodynamic loads on the blade element are then obtained. The torque and torque coefficient of the blade are derived by using integration. A polynomial approximation is applied to functions of the lift and drag coefficients for the symmetric and asymmetric airfoils respectively, where specific expressions of aerodynamic loads as functions of the angle of attack (which is a function of pitch angle) are obtained. The pitch optimization problem is investigated by considering the maximum value problem of the instantaneous torque of a blade as a function of pitch angle. Dynamic pitch laws for HAWT blades with either symmetric or asymmetric airfoils are derived. Influences of parameters including inflow ratio, rotational speed, azimuth, and wind speed on torque coefficient and optimal pith angle are discussed.

• Journal of Oral Medicine and Pain
• /
• 제26권1호
• /
• pp.59-73
• /
• 2001

This study was performed to investigate the effects of occlusal appliance on the mandibular position and the mandibular rotational torque movement during speech. For this study, 20 patients with temporomandibular disorders(TMDs) and 20 normal subjects without any signs and symptoms in the masticatory system were selected as the patient group and as the normal group, respectively. Biopak $system^{(R)}$(Bioresearch Inc., Milwaukee, USA) and a sentence of 'Sue is missing her house' were used for recording and for observing of speech pattern. There were five mandibular positions observed in this study, that is, mandibular rest position, 'ssi', 'her', 'ha', and 's' speech position. In each position, slant and A-P distance in sagittal plane, vertical distance and lateral distance in frontal plane were measured. Amount of the mandibular rotational torque movement were measured at 'her', 'ha' speech position and for all through speech movement. Centric relation splint(CRS) was placed in both groups, but anterior or posterior bite plane were placed in normal subjects only. Data collected were processed and analysed by SPSS windows program. The results of this study were as follows : 1. Mandibular positions in both groups were not different before adaptation, with CRS, and after removal, but total amount of the mandibular rotational torque movement was greater in patients. 2. Mandible was slightly placed anteriorly with CRS at 'her' and 'ha' speech position in patients, but was placed anteriorly at all the five positions in normal subjects. 3. Difference with type of occlusal appliance in normal subjects were noted only for vertical distance at 'ssi' and 'ha' speech position, and the distance with CRS were more than that with posterior bite plane. 4. Mandibular rotational torque movement at 'her' and 'ha' speech position was greater in patients, but the difference was disappeared after appliance removal. And the torque movement was greater at 'ha' speech position than that at 'her' speech position in frontal plane. It could be concluded that the adaptation of occlusal appliance showed a tendency to locate the mandible anteriorly during speech in both groups, but did not affect total mandibular rotational torque movement which was greater in patients.

• 한국자동차공학회논문집
• /
• 제1권1호
• /
• pp.101-109
• /
• 1993

Dynamic characteristics of an electro-magnetic clutch transmission system were investigated by using Bondgraph modeling method. Simulation results showed that when the rotor engaged with the armature, the response time of the current, the driver torque, the rotational speed and the relative sliding time between the driver and the driven side decreased, as the gap size between the rotor and the armature decreased and the number of coil turns increased. Also, when the rotor disengaged with the armature, the delay time increased with the decreased gap size and the increased number of coil turns. It was found that the experimental results of the current, the driver torque, the rotational speeds were in good accordance with the theoretical results. The results of this study can be used as basic design materials of the electro-magnetic clutch.

• 한국지진공학회논문집
• /
• 제17권5호
• /
• pp.227-235
• /
• 2013

Friction energy dissipative devices have been increasingly implemented as structural seismic damage protecting systems due to their excellent seismic energy dissipating capacity and high stiffness. This study develops rotational friction energy dissipative devices and verifies experimentally their cyclic response. Based on the understanding of the differences between the traditional linear-motion friction behavior and the rotational friction behavior, the configuration of the frictional surface was determined by investigating the characteristics of the micro-friction behavior. The friction surface suggested in this paper consists of brake-lining pads and stainless steel sheets and is normally stressed by high-strength bolts. Based upon these frictional characteristics of the selected interface, the rotational friction energy dissipative devices were developed. Bolt torque-bearing force tests, rotational friction tests of the suggested friction interfaces were carried out to identify their frictional behavior. Test results show that the bearing force is almost linearly proportional to the applied bolt torque and presents stable cyclic response regardless of the experimental parameters selected this testing program. Finally, cyclic tests of the rotational friction energy dissipative devices were performed to find out their structural characteristics and to confirm their stable cyclic response. The developed friction energy dissipative devices present very stable cyclic response and meet the requirements for displacement-dependent energy dissipative devices prescribed in ASCE/SEI 7-10.

• 대한기계학회논문집B
• /
• 제37권4호
• /
• pp.423-429
• /
• 2013

수직축 풍력발전기의 발전 전력을 유동해석을 이용하여 예측하였다. 해석은 블레이드 회전 속도를 고정하고 그 회전 속도에서 토크를 반력으로 추출하였다. 여러 경우의 블레이드의 회전 속도에 대해 토크를 구하고 발전 용량을 계산하였다. 회전 속도에 따른 발전 토크와 발전 용량을 계산함으로써 최적의 발전기와 그 때의 회전 속도를 선정할 수 있었다. 또한, 블레이드의 개수와 블레이드의 형상에 대해 해석을 수행하여 그 영향을 분석하였다. 마지막으로 실험을 수행하여 그 결과를 비교하였다.

• 한국산업융합학회 논문집
• /
• 제25권3호
• /
• pp.379-386
• /
• 2022

The goal of this research is to verify a performance test system for a low speed, high torque, and harsh reducer at low cost. The reducer rotates a cooling fan with a diameter of 10 meters, in a high temperature (50℃) cooling tower in a geothermal power plant. It requires about 500 kgf·m torque and 47.75 kW power to rotate the fan at a maximum power condition. An expensive dynamometer is commonly used for performance test of a motor or a reducer. In this paper, a low cost system is developed using a hydraulic pump as a load unit to generate torque instead of a dynamometer. We accurately calculated the required power, the flow meter, and the pressure of the pump, and selected to design and optimize the system at minimal cost. The system also applied another reverse reducer and a gearbox to increase the rotational speed and to reduce the torque from the low speed and high torque target reducer. This allows low-cost systems to be built using inexpensive components. The developed system was able to successfully measure the high torque and the low rotational speed of the target reducer at high temperature.