• 비파괴검사학회지
• /
• 제30권6호
• /
• pp.558-563
• /
• 2010

In this paper, the novel approach for the fault diagnosis of the bearing equipped with rotational mechanical facilities was studied. As research works, by applying the ball bearing used extensively in many industrial fields, experiments were conducted in order to propose the new prognostic method about the condition monitoring for the rotational bodies based on the condition analysis of infrared thermography. Also, by using the vibration spectrum analysis, the real time monitoring was performed. As results, it was confirmed that infrared thermography method could be adapted into monitor and diagnose the fault for bearing by evaluating quantitatively and qualitatively the temperature characteristics according to the condition of the ball bearing.

• 산업경영시스템학회지
• /
• 제46권2호
• /
• pp.168-175
• /
• 2023

In the era of the 4th Industrial Revolution, Logistic 4.0 using data-based technologies such as IoT, Bigdata, and AI is a keystone to logistics intelligence. In particular, the AI technology such as prognostics and health management for the maintenance of logistics facilities is being in the spotlight. In order to ensure the reliability of the facilities, Time-Based Maintenance (TBM) can be performed in every certain period of time, but this causes excessive maintenance costs and has limitations in preventing sudden failures and accidents. On the other hand, the predictive maintenance using AI fault diagnosis model can do not only overcome the limitation of TBM by automatically detecting abnormalities in logistics facilities, but also offer more advantages by predicting future failures and allowing proactive measures to ensure stable and reliable system management. In order to train and predict with AI machine learning model, data needs to be collected, processed, and analyzed. In this study, we have develop a system that utilizes an AI detection model that can detect abnormalities of logistics rotational equipment and diagnose their fault types. In the discussion, we will explain the entire experimental processes : experimental design, data collection procedure, signal processing methods, feature analysis methods, and the model development.

• Journal of Radiation Protection and Research
• /
• 제32권1호
• /
• pp.15-20
• /
• 2007

An empirical formula fur the neutron dose equivalent at the maze entrance of medical accelerator treatment rooms was derived on the basis of a Monte Carlo simulation. The simulated neutron dose equivalents around the Varian medical accelerator by the MCNPX code were employed. Two cases of target rotational planes were considered: parallel and perpendicular to maze walls. Most of the maximum neutron dose equivalents at the doorway were found when the target rotational planes were parallel to maze walls and the beams were directed to the inner maze entrances. The neutron dose equivalents at the outer maze entrances were calculated for about 698 medical accelerator facilities which were generated from the geometry configurations of running treatment rooms, based on such gantry rotation that produces the maximum neutron dose at the doorway. The results calculated with the empirical formula in this study were compared with those calculated by the Kersey method for 7 operating facilities. It was found that the maximum disagreement between the calculation of this study and that of the Kersey method was a factor of 8.54 with the value calculated by the Kersey method exceeding that of this study. It was concluded that the kersey method estimated the neutron dose equivalent at the doorway computed by MCNPX more conservatively than this study technique.

• 한국농공학회지
• /
• 제45권5호
• /
• pp.67-76
• /
• 2003

The principal operation rule of irrigation reservoir is to accelerate the water use and supply water actively when water is sufficient, and to restrict water use and supply water deficiently in order not to stop the irrigation activity when water is scarce. In drought seasons. water should be saved in order to keep the reservoir not to be dried up during the irrigation season. It is important to know how much water should be saved, depending on the rice-growing season and water storage volume. For the drought control of irrigation reservoirs. the rotational irrigation scheduling in paddy with the operation rule curve developed in this study could be utilized as a software program to install TM/TC system for irrigation water supply by automation facilities.

• Design & Manufacturing
• /
• 제13권4호
• /
• pp.28-33
• /
• 2019

In this study, the flow analysis of fermentation tank, digester and dryer, which are the main equipment in environmental energy facilities, was carried out. Numerical analysis was carried out with the size of the actual plant, and 3D modeling program CATIA V5 R16, grid generation program Gambit, and general purpose flow analysis package ANSYS-FLUENT (v13) were used. Simulation results of the carrier gas flow analysis in the STD dryer using the computational fluid dynamics program showed that the carrier gas smoothly circulated between the shells of the dryer and the flow was uniformly distributed without stagnation or flow. It is also predicted that rotational flow due to shell rotation is active. The average flow velocity of carrier gas in the STD dryer was estimated to be about 0.196m / s, and the average temperature of the carrier gas was calculated to be 424K. Due to the relatively slow carrier gas velocity and high average temperature, the water content of the sludge can be effectively lowered.

• 조명전기설비학회논문지
• /
• 제12권4호
• /
• pp.47-54
• /
• 1998

발전설비에 있어 고신뢰성이 요구됨에 따라 진행되는 고장을 조기에 발견하는 예방 보전적 진단 시스템이 요구되고 있다. 본 논문에서는 발전설비 중에서 회전체의 절연진단과 진동진단에 대한 지식을 지식 베이스로 구성하고 이것을 다표정 언어를 이용하여 전문가 시스템을 구성하였다. 이 전문가 시스템은 진단 룰의 수정과 추가가 용이하며, 사용자와의 인터페이스도 양호한 구조를 취하고 있다.

• 한국유체기계학회 논문집
• /
• 제4권4호
• /
• pp.22-27
• /
• 2001

The pump/motor selection program for optimized selection of regional water supply facilities was developed based on a flowchart compiled from basic operational data, total head requirement, initial pump/motor specification selection etc. This program was developed in Visual Basic. The program accepts, as in the flowchart, operational requirements of pumps and other system requirements, and calculates specific speed based on flow rate, total head and rotational speed. Then the calculated specific speed is used to select pump types and speed prior to determining likelihood of cavitation occurring at the calculated NPSH. Power requirement is then calculated for safe operation of pump to assist final pump selection. Test results of the program match very closely to the design values of Paldang intake pump station(3rd stage) proving that the program can be used as an effective and practical aid for designing new regional water supply systems.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.33.2-33.2
• /
• 2011

The 'NREL Phase VI' model with a 10.06m diameter was tested in the NASA Ames tunnel to make a reference data of the computational models. The test was conducted at the one rotational speed, blade tip speed 38m/s and the Reynolds number of the sectional airfoils in that test was around 1E6. The 1/5 scale down model of the 'NREL Phase VI' model was used in this paper to study the power characteristics in low Reynolds number region, 0.1E6 ~ 0.4E6 which is achievable range for the conventional wind tunnel facilities. The torque generated by the blade was directly measured by using the torque sensor installed in the rotating axis for a given wind speed and rotational speed. The power characteristics below the stall condition, lambda > 4, was presented in this paper. The power coefficient is very low in the condition below the Re. 0.2E6 and rapidly increases as the Re. increases. And it still increases but the variation is not so big in the condition above the Re. 0.3E6. This results shows that to study the performance of the wind turbine blade by using the scaled down model, the Re. should be larger than the 0.3E6.

• 한국실내디자인학회논문집
• /
• 제19권3호
• /
• pp.224-233
• /
• 2010

As urban function has become diversified and complicated, multifunctional complex facilities to satisfy new functional desires are necessary. Since local autonomy started, many facilities previously run and managed by central administrative agencies are now under management of localities, and functionally, the necessity for governments complexes town to satisfy diverse taste of populace such as creating local community becomes imminent. Analyzing characteristics by space composition factor of the public health center, newly built as part of such governments complexes town and understanding required area of each part, this project is to be used as basic material for construction plan of public health center that is equipped with local characters while devising construction of the public health center in the governments complexes town. Research method is to analyze four public health center facilities located in governments complexes town sites built after 2007, among twenty five public health centers in Seoul, by spatial functions. Also, based on statistical documents of usage of public health center facilities, research over spatial compositional factors and area composition has been conducted. As a result, connectivity between local government building located inside the governments complexes town and public health center and that of spatial composition factor by part, area ratio by part and floor type of public health center are comprehended. Connectivity type of public health centers are divided into horizontal and vertical connectivity and it is found that spatial composition of public health center is compartmentalized into low level, mid level and high level, to make access by users easier. Level type is decided as radial, rotational and combined by hallway connecting facilities.

• 교육녹색환경연구
• /
• 제20권1호
• /
• pp.1-10
• /
• 2021

본 연구는 초등학교 물리적 환경의 유니버설 디자인 적용수준을 유니버설 디자인 7가지 원칙을 기준으로 평가하여 공간 및 시설 측면의 개선안을 제시하고자 하였다. 이를 위하여 초등학교 243개소를 대상으로 현장 실태조사를 실시하여 적용수준이 낮은 시설을 분석하였다. 분석결과 '쉽게 인지할 수 있는 정보' 및 '사용상의 융통성'과 관련한 환경개선이 가장 시급한 것으로 조사되었으며, '적은 신체적 노력' 원칙의 적용성 향상을 위해 대지선정과 설계 초기부터의 계획 적용이 필요한 것으로 나타났다.