Fault Diagnosis of Ball Bearings within Rotational Machines Using the Infrared Thermography Method

  • Kim, Dong-Yeon (Department of Precision Mechanical Engineering Chonbuk National University) ;
  • Yun, Han-Bit (Department of Precision Mechanical Engineering Chonbuk National University) ;
  • Yang, Sung-Mo (Department of Precision Mechanical Engineering Chonbuk National University) ;
  • Kim, Won-Tae (Division of Mechanical and Automotive Engineering, Kongju National University) ;
  • Hong, Dong-Pyo (Department of Precision Mechanical Engineering Chonbuk National University)
  • Received : 2010.11.01
  • Accepted : 2010.12.10
  • Published : 2010.12.30

Abstract

In this paper, the novel approach for the fault diagnosis of the bearing equipped with rotational mechanical facilities was studied. As research works, by applying the ball bearing used extensively in many industrial fields, experiments were conducted in order to propose the new prognostic method about the condition monitoring for the rotational bodies based on the condition analysis of infrared thermography. Also, by using the vibration spectrum analysis, the real time monitoring was performed. As results, it was confirmed that infrared thermography method could be adapted into monitor and diagnose the fault for bearing by evaluating quantitatively and qualitatively the temperature characteristics according to the condition of the ball bearing.

Keywords

References

  1. Choi, M. Y. and Kim, W. T. (2004) The Utilization of Nondestructive Testing and Defects Diagnosis Using Infrared Thermography, Journal of the Korean Society for Nondestructive Testing, Vol. 24, No. 5 pp. 525-531
  2. Kim, J. Y., Yoon, S. W., Im, N. B, Yoo, S., Ma, S. D., Yang, D. J. and Song, I. S. (2001) Thermo-Analysis of Machining Center Main-Axis Thermo-Displacement for Infrared Rays Thermo-Image Camera, Proceedings of the Korean Society of Machine Tool Engineers Conference, pp. 125-130
  3. Kim, Y. G., Jang, J. B. and Kim Y. J. (1997) A Study on the Non-Destructive Test of Concrete Tunnel Lining Using Infrared Thermography Technique, J. of Korean Society for Rock Mech., Vol. 7, pp. 75-83
  4. Kim, W. T., Kang, K. K., Choi, M. Y. and Park, J. H. (2008) Analysis of Thermoelastic Stress in the Cantilever Beam by Lock-in Thermography, Journal of the Korean Society for Nondestructive Testing, Vol. 24, No. 5, pp. 273-278
  5. Kim, W. T., Hong, D. P., Yoo, C. H. and Kim, D. Y. (2010) Condition Monitoring under In-Situ Lubrication Status of Bearing Using Infrared Thermography, Journal of the Korean Society for Nondestructive Testing, Vol. 30, No. 2, pp. 121-125
  6. Kim, W. T., Choi, M. Y. and Park, J. H. (2005) Diagnosis of Defect Points in Materials Using Infrared Thermography, Journal of the Key Engineering Materials, Trans Tech, Vols. 297-300, pp. 2169-2175