• 반도체디스플레이기술학회지
• /
• 제9권1호
• /
• pp.11-16
• /
• 2010

Wafer Pre-Alignment is to find the center and the orientation of a wafer and to move the wafer to the desired position and orientation. In this paper, an area camera based pre-aligning method is presented that captures 8 wafer images regularly during 360 degrees rotation. From the images, wafer edge positions are extracted and used to estimate the wafer's center and orientation using least squares circle fitting. These data are utilized for the proper alignment of the wafer. For accurate alignments, camera calibration methods using high order polynomials are used for converting pixel coordinates into real-world coordinates. A complete pre-alignment system was constructed using mechanical and optical components and tested. Experimental results show that alignment of wafer center and orientation can be done with the standard deviation of 0.002 mm and 0.028 degree, respectively.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2006년도 하계학술대회
• /
• pp.202-204
• /
• 2006

A new method is presented to design RF filters without the Similarity Transform of their coupling coefficient matrix as circuit parameters which is very tedious due to pivoting and deciding rotation angles needed during the iterations. The transfer function of a filter is directly used for the design and its desired form is derived by the optimized rational-function fitting technique. A 3rd order Coaxial Lowpass filter and an 8th order dual-mode elliptic integral function response filter are taken as an example to validate the proposed method.

• 한국기계가공학회지
• /
• 제3권4호
• /
• pp.7-12
• /
• 2004

Inspection and analysis are essential process to determine whether a completed product is in given specification or not. Analysis of products with very complicated shape is difficult to carry out direct comparison between inspected coordinate and designed coordinates. So process called as matching or registrations is needed to solve this problem. By defining error between two coordinates and minimizing the error, registration is done. Registration consists of translation, rotation and scale transformations. Error must be defined to express feature of inspected product. In this paper, registration algorithm is developed to determine pose of sub-frame at assembly with body of automobile by defining error between two coordinates considering geometric feature of sub-frame.

• 한국멀티미디어학회논문지
• /
• 제18권2호
• /
• pp.106-112
• /
• 2015

In this paper, we propose a method for correction of perspective distortion on a taken image. An image taken by a camera is caused perspective distortion depending on the direction of the camera when objects are projected onto the image. The proposed method in this paper is to obtain the normal vector of the plane through the depth information using a depth camera and calculate the direction of the camera based on this normal vector. Then the method corrects the perspective distortion to the view taken from the front side by performing a rotation transformation on the image according to the direction of the camera. Through the proposed method, it is possible to increase the processing speed than the conventional method such as correction of perspective distortion based on color information.

• 대한기계학회논문집A
• /
• 제24권7호
• /
• pp.1643-1649
• /
• 2000

When markers attached to body segment are captured by camera, they generally have many noises due to intrinsic biomechanical characteristics. In this study, one technique to reduce these noises is suggested, which constructs a local coordinates of the markers using time-mean lengths of the measured markers and calculates a linear transformation matrix of the interesting body using least square error technique. This matrix is decomposed into two matrices of rotation and flexibility. Suggested method does well for 3 markers or more, and shows consistent results without regard to choice of reference axis.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.429-433
• /
• 1995

Compound solid is maded for specially fixed object. A number of compound soild are devided as a unit germetric solid. The special case of rotation about an arbitrary axis makes according selection modelfor transformation. View plane and View region are estiblished for back face removal. After back-face removal eachedge is checked for point of intersection. The designing of of fset surface id maded and tool-path gernerted on the part surface. In tersection point is checked among the offset surfaces. The paper used an efficient algorithm for generating tool paths to apply a notion view volume. Through machining experiments with a 3-axis machining centre, the adequacy of the analysis was confirmed.

• 한국항공운항학회지
• /
• 제19권3호
• /
• pp.16-24
• /
• 2011

In this research, a cockpit display system using 3 dimensional geographic information was developed. A coordinate transformation method from WGS84 to TM was first studied. Octree data structure was used for efficient 2D and 3D graphic display. Also, a 3D graphic engine was developed for fast display with large amount of geographic data which can be practically used in aircraft onboard computer having low performance. This 3D engine contains additional function such as geographic and object information loading, many kinds of camera mode, aircraft position and rotation control function, character strip display. In the future research, actual GPS signal should be used and additional information that can help pilot's decision should be display.

• 대한수의학회지
• /
• 제53권1호
• /
• pp.7-10
• /
• 2013

A study was conducted to determine the interdependence among the conformation traits of 28 "Pallaresa" cows using principal component analysis. Originally 21 body linear measurements were obtained, from which eight traits are subsequently eliminated. From the principal components analysis, with raw varimax rotation of the transformation matrix, two principal components were extracted, which accounted for 65.8% of the total variance. The first principal component alone explained 51.6% of the variation, and tended to describe general size, while the second principal component had its loadings for back-sternal diameter. The two extracted principal components, which are traits related to dorsal heights and back-sternal diameter, could be considered in selection programs.

• 한국정밀공학회지
• /
• 제22권10호
• /
• pp.107-113
• /
• 2005

This paper presents a method to reduce errors in registration, which is used in transformation coordinate system of the multiple measuring data. In general, the ICP algorithms and feature-based approaches are used for registration. In order to measure wrap-around object, it is necessary to change the scanning direction or set-up of the object. A fixture is made to reduce registration errors caused by inaccurate center point of tooling balls, providing the more accurate registration method. And, the motorized fixture controls rotation and tilting to get precise the measuring data and registration. The proposed motorized fixture and registration method have advantages in accurate registration and precise measurement, compared with the conventional methods.

• 제어로봇시스템학회논문지
• /
• 제19권10호
• /
• pp.886-890
• /
• 2013

In this paper, a 3D coordinates acquisition method for a mechanical assembly is developed by using multiview X-ray images. The multi-view X-ray images of an object are obtained by a rotary table. From the rotation transformation, it is possible to obtain the 3D coordinates of corresponding edge points on multi-view X-ray images by triangulation. The edge detection algorithm in this paper is based on the attenuation characteristic of the X-ray. The 3D coordinates of the object points are represented on a graphic display, which is used for the inspection of a mechanical assembly.