• Journal of KSNVE
• /
• v.7 no.1
• /
• pp.81-89
• /
• 1997

The structural stress and vibration analysis of the rotary screen are investigated. The mechanical properties of the rotary screen, this is, Young's modulus and density of nickel alloy are determined experimentally. The natural vibration characteristics of the rotary screen are evaluated and the displacement, the stress of the rotary screen under the various load conditions are also examined. The radial displacement of the rotary screen is obtained by experiment under various rotating speeds.

• Transactions of Materials Processing
• /
• v.20 no.2
• /
• pp.93-98
• /
• 2011

Electroforming is a kind of metal molding technology. After gilding on the possession object(conductivity, nonconductivity) separate it with possession object and produce a part or duplicate. This process has an excellent ability of duplicating detailed figure. To simplify the manufacturing process of a rotary screen, this study was adopted electroforming technology and produced silicon rubber mandrel. Furthermore, to indicate the optimal condition for the acquisition of high-qualified rotary screen product, the experiment was executed with pH, time, sulfamate nickel solution according to density which were the main factors to decide the condition, then compared it with the product made by original "S" company in Holland. As a result, the figure of hole was more obvious and correct. Also the open size increased by more than 2-3%.

• PNF and Movement
• /
• v.15 no.1
• /
• pp.67-75
• /
• 2017

Purpose: The purpose of this study was to determine the effects of a functional movement correction exercise on the functional movement screen scores of badminton players. Methods: The participants consisted of 25 badminton players who were randomly assigned to an experimental group (n = 13) or a control group (n = 12); they engaged in exercise three times per week for eight weeks. The experimental group engaged in the functional movement correction exercise, while the control group engaged in general exercise. An FMS kit (USA) was used to measure the following: FMS score, deep squat, hurdle step, in-line lunge, shoulder mobility, active straight leg raise, trunk stability push up, and rotary stability. Results: The FMS score, deep squat, hurdle step, in-line lunge, shoulder mobility, active straight leg raise, and trunk stability push up, and rotary stability showed significant improvement in the experimental group (p < 0.05). Conclusion: The experiment confirmed that the functional movement screen scores of badminton players improve with effective exercise interventions.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.574-580
• /
• 1996

The objective of the research is to automate the process of making screen for textile printing. Conventional process give rise to the trouble of high cost, long development period, pollution and etc. The automatized system using laser would give the competitive power for the textile industry by reducing the production cost and period.

• Journal of Korean Physical Therapy Science
• /
• v.24 no.1
• /
• pp.49-58
• /
• 2017

Purpose: To determine the effect of Functional movement screen(FMS) of Healthy subjects. Method: 18 subjects were randomly assigned toFunctional movement screen test. To measure functional movement screen(deep squat, hurdle step, in line lunge, shoulder mobility reaching, active straight leg raise, trunk stability push up, rotary stability). Result: FMS scores were deep squat 2.61score, right hurdle step 2.67 score, lift hurdle step 2.83 score, in line lunge 2.83 score, right shoulder mobility 2.67 score, left shoulder mobility 2.61 score, right active straight-leg raise 3.00 score, left active straight-leg raise 3.00 score, trunk stability push up 2.33 score, rotary stability 1.94 score. Conclusion: FMS can improve functional movement in healthy adults.

• 한국연소학회:학술대회논문집
• /
• 2004.11a
• /
• pp.41-45
• /
• 2004

A dust injection system was developed for the lime calcining rotary kiln for the coke dust from the coke dry quenching(CDQ) facility to be used as a fuel. The CDQ dust was injected with the gaseous fuel through the hole in the burner. In order to prevent the spot heating large particles should be removed from dust and dust should be injected as fast as possible so that particle combustion lasts as long as possible without precipitation. This is especially necessary when dust is burned together with gaseous fuel because the gaseous fuel can not go so far and in addition dust combustion aggravates hot spot heating. In this research a rotation drum screen was used to remove particles with diameter larger than 4mm and dust injection speed was 40m/sec. And the burner was adjusted not to use swirl that hinders flame go far away. With these measures scale generation iside the kiln could be reduced to be negligible and in addition NOx emission could be reduced from 150ppm to 20ppm. The fuel reduction was about 85Mcal/T-lime.

• PNF and Movement
• /
• v.14 no.1
• /
• pp.23-32
• /
• 2016

Purpose: The purpose of this study was to determine the effects of a coordinative locomotor training program on the functional movement screen (FMS) scores of badminton players. Methods: The participants consisted of 31 badminton players who were randomly assigned to either an experimental group (n=15) or a control group (n=16), and engaged in exercise five times per week for six weeks. The experimental group engaged in coordinative locomotor training and the control group engaged in general exercise. An FMS kit (USA) was used to measure the following: FMS score, deep squat, hurdle step, in-line lunge, shoulder mobility, active straight leg raise, trunk stability push up, and rotary stability. Results: The FMS score, deep squat, hurdle step, in-line lunge, active straight leg raise, and trunk stability push up showed significant improvement in the experimental group (p<0.05). Conclusion: The coordinative locomotor training program was able to produce confirmation that functional movement screen scores change in the case of effective exercise interventions in badminton players.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.04a
• /
• pp.209-214
• /
• 1996

본 연구의 목적은 레이저를 이용한 로타리 스크린 engraving기의 개발에 있어서 작동 및 운영시의 응력 및 진동해석을 통하여 변형 및 진동을 최소화하는 방안을 찾는데 있다. 본 연구에서 로타리 스크린 재료인 니켈합금의 기계적 물성은 실험을 통하여 결정하였다. 구조진동해석을 통하여 로타리 스크린의 고유진동 특성을 연구하였으며, 구조응력해석을 통하여 회전수, 초기인장 그리고 편심등의 영향을 고려한 로타리 스크린의 변위 및 응력 등을 고찰하였다. 또한 로타리 스크린의 회전수에 따른 진동특성을 실험을 통하여 고찰하였다.

• Journal of the Korea Computer Industry Society
• /
• v.4 no.4
• /
• pp.449-454
• /
• 2003

In this paper, GU environmental controller is implemented with USB(Universal serial bus) IF(interface). Especially, the performance examination of ultrasound diagnostic device which connects external USB port with front panel is automatically inspected by VC++ examination program. The test program minimizes the operation of inspector with making the examined result audible or visible, and maximizes the productivity of custom device. The GUI environmental controller controls a standard keyboard, a track ball with dedicated buttons to emulate a standard two-button mouse, switches, rotary encoders, an analog potentiometer group, two alpha-numeric displays. and a touch screen; all of which generate events for the host.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.315-318
• /
• 1997

The ECG-NIBP patient monitor consist of Noninvasive Blood Pressure(NIBP) module that have micro controller inside. This module transfer data by serial communication to the main processor. This system apply the fuzzy inflating method to reduce the blood pressure measuring time, and moving artifact removing algorithm, several parameters used or more accurate measurement. The ECG monitor use the Digital Signal Processor(DSP) or digital filtering, peak detection, heart rate calculation. This system also offer convenient user interface by rotary key, menu bar. With 7" CRT display, auxiliary TFT LCD display adapted to display information on wide screen.