• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2016년도 전력전자학술대회 논문집
• /
• pp.243-244
• /
• 2016

A discrete time domain modeling for the duty-cycle-controlled buck LED driver is presented in this paper. Based on the modeling result, a root locus analysis for the buck LED driver is done to derive the stability boundaries of feedback gains.

• 전기의세계
• /
• 제14권6호
• /
• pp.8-13
• /
• 1965

The TRIGA Mark-II Reactor is very simple to analyze the dynamic characteristics, so that the heat transfer function of the reactor fuel rod is able to be considered as a over-all feedback transfer function. The heat transfer dynamics of the fuel rod is derived under some assumptions. And the over-all reactor transfer function is analytically calcu- lated and it is compared with the measured value. The reactor dynamics and the stability are analyzed by means of the Root-Locus and the Nyquist.

• 한국지능시스템학회논문지
• /
• 제9권4호
• /
• pp.384-388
• /
• 1999

This paper describes an approach for synthesizing a modularized gain scheduled PD type fuzzy logic controller(FLC) of nonlinear magnetic bearing system where the gains of FLC are on-line adapted according to the operating point. Specifically the systematic procedure via root locus technique is carried out for the selection of the gains of FLC. Simulation results demonstrate that the proposed gain scheduled fuzzy logic controller yields not only maximization of stability boundary but also better control performance than a single operating point (without gain scheduling)fuzzy controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.141.1-141
• /
• 2001

This paper describes an approach for synthesizing a modularized gain scheduled PD type fuzzy logic controller(FLC) for a high maneuverable aircraft system, where the gains of FLC are on-line adapted according to the flight condition. Specially, the systematic procedure via root locus technique is carried out for the sellection of the gains of FLC. Simulation results demonstrate that the proposed gain scheduled fuzzy logic controller yields better control performance than the normal (without gain scheduling) fuzzy controller.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.330-335
• /
• 1996

The well-conditioned observer design method is extended for two-output systems where observer gains are not determined uniquely with respect to the desired observer poles. Similar to the previous results, this design method makes off-diagonal elements of the observer upper-left submatrix skew-symmetric and simulataneously, places the eigenvalues of the observer matrix widely separated by selecting upper two rows of the observer gain. The proposed design method is evaluated in a spindle-drive example where the load speed is estimated based on motor speed and the armature current.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.475-480
• /
• 1990

A design of aeroload simulator is proposed which is used for the dynamic test of guided missile servoactuation system. Since the simulator is linked to the servoactuation system, it is a two-input one-output system. The mathematical model of the aeroload simulator is derived and the root-locus method is applied to design compensator to improve the stability, response speed and accuracy of the system. Computer simulations are done to verify the goodness of the system design.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.485-492
• /
• 1990

This paper propose a optimal design method for robust notion controllers of under-water vehicles using the combined technique between classical and modern theories. The proposed method is presented which utilizes classical control methods to obtain a good robustness and modern control methods to set optimal gains. LQ, SVD, multivariable frequency analysis and Bode-Root Locus (BRL) plot are used.

• International Journal of Control, Automation, and Systems
• /
• 제5권2호
• /
• pp.208-211
• /
• 2007

In a recently proposed method of model reduction for discrete interval systems, the denominator polynomial of a reduced model is computed by applying interval arithmetic to dominant poles of the original system. However, the denominator polynomial obtained via interval arithmetic usually has poles with larger intervals than desired ones. Hence an unstable polynomial can be derived from the stable polynomial. In this paper a simple technique is presented to partially overcome such a stability problem by accurately preserving desired real dominant poles.

• 산업기술연구
• /
• 제15권
• /
• pp.195-202
• /
• 1995

In this paper, we analyze the effects of scaling factors on the performance of a fuzzy controller. The quantitative relation between input and output variables of a fuzzy controller is obtained by using a quasi-linear fuzzy model. And an approximate transfer function of a fuzzy controller is derived from the comparison of fuzzy controller with the conventional PID controller. Then we analyze the effects of scaling factor using this approximate transfer function and root locus method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.251-254
• /
• 1999

This paper presents the basic tuning method for PSS control parameters. This method includes the phase compensation and root-locus based gain tuning for one machine with infinite bus system. At the tuning condition and least stable condition, the effect of gain tuning is also discussed.