• Journal of Auto-vehicle Safety Association
• /
• v.6 no.2
• /
• pp.67-71
• /
• 2014

Based on the analysis of the actual passenger vehicle fire cases for recent four years (2010~2013), the passenger vehicle fire is increasing annually. Main root cause was analyzed as an electric problem as a 39%. Vehicle fire case by electric problem was mainly caused by use of Non-genuine part. Vehicle fire case by mechanical problem was mainly caused by various oil system maintenance. Vehicle fire case by smoking material was mainly caused by cigarette and disposal lighter. And external fire transition issue and towing mistake fire cases was also confirmed.

• Journal of Applied Reliability
• /
• v.6 no.1
• /
• pp.93-103
• /
• 2006

Basic function of calorifier system is to supply warm water to the vessel. The heater used in the calorifier system plays a very important role in its reliability. The failure mechanism of heater are compared with accelerated life test. The main cause of failed heater is pitting corrosion occurred between the surface of heater and spacer. To prevent the corrosion failure from heater, material of spacer replaces metal(SUS 304) with polymer (Acryl). The life of redesigned heater can guarantee 2.47years of B10 life under the worst condition.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.36 no.3
• /
• pp.34-42
• /
• 2013

In this study, we develop a method for analyzing business process based on the event-driven process chain (EPC) model. The method consists of five stages such as identifying abnormal events, finding causes for the abnormal events and problems caused by the abnormal events, making cause-and-effect chains, drawing root-cause map, and defining improvement areas. We illustrate how to apply the method with some examples for the domestic registered mail delivery process.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.19 no.2
• /
• pp.215-223
• /
• 2021

The domestic CANDU nuclear power plants have been operated for a long time and various unforeseen spent fuel defects have been discovered. As the spent fuel defects are important factors in the safety of the nuclear power plant, a study on the analysis of the spent fuel defects to prevent their recurrence is necessary. However, in cases where the fuel rods inside the fuel assembly are defected, it is difficult to dismantle the fuel assembly owing to their welded structure and the facility conditions of the plant. Therefore, it is impossible to analyze the spent fuel defect because it is difficult to visually check the shape of the fuel defect. To resolve these problems, an analysis technology that can predict the number of defected fuel rods and defect size was developed. In this study, we developed a methodology for investigating the root cause of spent fuel defects using a database of the earlier fuel defects in the plants. It is anticipated that in the future this analysis technology will be applied when spent fuel defects occur.

• Safety and Health at Work
• /
• v.12 no.4
• /
• pp.544-545
• /
• 2021

The article by Tae-Gu Kim et al. conducted elastic FE modeling, which was inappropriate for fracture of elastic-plastic chain material (11.3% of elongation). FE analysis results and the findings in the fracto-graphic analysis did not tally but contradicted each other. The article identified "incorrect installation"/bending forces as the root cause while FE results of the chain under bending forces showed very low stresses at fracture locations but the highest stress in the middle of shank of the chain. The article's "step-like topographies indicating the fracture due to bending moment rather than uniaxial tension" lacked scientific support. The load value carried by each chain section under bending/incorrect installation was only half of that under tension, thus the article using same load value in FE simulation comparison for bending and tension was incorrect. The real cause of the chain fracture was likely improper checking the lifted load or/and using the wrong chain with much lower safety working load.

• Journal of Ginseng Research
• /
• v.4 no.2
• /
• pp.197-221
• /
• 1980

Habitat observation, cultural experience of old and present plantation, weather factors in relation to crop stand and water physiology of root and leaf were reviewed. According to habitat observation ginseng plants love water but plate wit talus well grow at drained place with high moisture content in air and soil while ginseng plants were not found in dry or wet place. According to cultivation experience ginseng plants require abundant water in nursery and main field but most old planters believe that ginseng plaints are draught-loving thus require little water. The experience that rain especially in summer i.e unfavorable might be due to mechanical damage of leaves arid leaf disease infection, or severe leaf fall which is caused by high air temperature and coinsided with rain. According to crop stand observation in relation to weather factors abunsant water increased each root weight but decreased total yield indicating tile increase of missing root rate. Rain in summer was unfavorable too. Though rain in June was favorable for high yield general experience that cloudy day and rain were unfavorable might be due to low light intensity under shade. Present leading planters also do loot consider the importance of water in main field. Water content is higher in top than in root and highest in central portion of root and in stem of top. For seedling the heavier the weight of root is tile higher the water content while it reveries from two years old. Water potential of intact root appeared to be -2.89 bar suggesting high sensitivity to water environment. Under water stress water content severly decreased only in leaf. Water content of leaf appeared to be 78% for optimum, below 72% for functional damage and 68% for perm anent wilting. Transpiration or curs Principally through stomata in lower side of leaf thus contribution of upper side transpiration decreased with the increase of intensity. Transpiration is greater in the leaves grown under high light intensity. Thus water content is lower with high light inte nsity under field condition indicating that light is probable cause of water stress in field. Transpiration reached maximum at 10K1ut The decrease of transpiration at higher temperature seems to be due to the decrease of stomata aperture caused by water stress. Severe decrease of photosynthesis under water stress seems to be principally due to functional damage which is not caused by high temperature and Partly due to poor CO2 supply. Water potential of leaf appeared to be -16.8 bar suggesting weakness in draught tolerance. Ginseng leaves absorb water under high humidity. Water free space of leaf disc is %mailer than that of soybean leaf and water uptake appears to be more than two steps.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.1
• /
• pp.162-168
• /
• 2007

Impaction of the maxillary central incisor may cause social, esthetic, and functional problems in children. There are various means of treatment for the inverted maxillary central incisor, such as extraction, surgical opening followed by orthodontic traction surgical repositioning or intra-alveolar autotransplantation prior to extraction. In this case, we surgically repositioned the inverted maxillary central incisor to normal semi-erupted position in a 5-year-old boy The developmental stage of the inverted tooth was Nolla's 6.5, which indicates formation of less than one third of the root. After surgical reposition, we did follow-up for 21 months, expecting spontaneous growth Unfortunately, poor prognosis was noted further root was not observed. Such failure seems to originate from possible injury on Hertwig's epithelial root sheath by surgical trauma. We performed surgical repositioning to retain the tooth instead of extraction. However, arrest of root development occurred which is one of the critical complications. In order to increase the success rate of the surgical reposition procedure, minimal surgical trauma is required as well as selection of adequate indication and decision of proper time of treatment considering the stage of root development.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.650-653
• /
• 2002

The increaseing speeds are accompanied by decreases in pulse rise and fall time in VLSI circuits. These accenturate the high frequency spectral contents of the signals and cause the frequency dependent loss of the conductors which interconnect the various sub-circuits composing of VLSI circuit. The lossy effect is approximated by the square root of frequency dependence of the per unit length resistance. In the practical applications, several problems may arise along with this approximation, so we extend our investigation of the lossy effect by numerical Laplace inversion method.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.19 no.1
• /
• pp.31-37
• /
• 1989

The author observed a rare case of radicular dentin dysplasia associated with enamel hypoplasia in a 11-year-old boy with a complaint of gum boil formation. 1. Clinically. yellowish-brown colored teeth with severe attrition and several gum boils were observed. 2. Radiographically, obliteration of pulp chamber and root canal, multiple periapical radiolucencies without obvious cause and blunt roots were observed. 3. Systemically, scalp hair and eyebrows were loose and short. And saddle nose could be also seen.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.777-778
• /
• 2012