Browse > Article
http://dx.doi.org/10.1016/j.shaw.2021.05.001

Comments on a Case Study on Engineering Failure Analysis of Link Chain  

Yu, George Y.H. (Department of Forensic Engineering, Universal Technology Centre)
Publication Information
Safety and Health at Work / v.12, no.4, 2021 , pp. 544-545 More about this Journal
Abstract
The article by Tae-Gu Kim et al. conducted elastic FE modeling, which was inappropriate for fracture of elastic-plastic chain material (11.3% of elongation). FE analysis results and the findings in the fracto-graphic analysis did not tally but contradicted each other. The article identified "incorrect installation"/bending forces as the root cause while FE results of the chain under bending forces showed very low stresses at fracture locations but the highest stress in the middle of shank of the chain. The article's "step-like topographies indicating the fracture due to bending moment rather than uniaxial tension" lacked scientific support. The load value carried by each chain section under bending/incorrect installation was only half of that under tension, thus the article using same load value in FE simulation comparison for bending and tension was incorrect. The real cause of the chain fracture was likely improper checking the lifted load or/and using the wrong chain with much lower safety working load.
Keywords
Chain fracture; Failure analysis; FEM simulation; Fractographicanalysis; Industrial accident;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Kim Tae-Gu, Lee Seong-Beom, Lee Hong-Chul. A case study on engineering failure analysis of link chain. Safety Health Work 2010;1:43-50.   DOI
2 Yu George YH. Forensic investigation on crane accidents. Int J Forensic Eng 2017;3:319-41.   DOI
3 Becker Metals WT, Dennis Mcgarry. Mechanisms and appearances of ductile and brittle fractureIn Failure analysis and prevention, vol. 11. ASM Metals Handbook; 2002. p. 587-626.
4 Bastid Philippe, Smith Simon D. Numerical analysis of contact stresses between mooring chain links and potential consequences for fatigue damage. In: 32nd international conference on ocean, offshore and arctic engineering. ASME; 2013.
5 Elements of a moment; 2021.. http://web.mit.edu/4.441/1_lectures/1_lecture5/1_lecture5.html.
6 ASME B30.9-2014Slings, SECTION 9-1.4; 2015. 5 p.
7 Klinger C. Failures of cranes due to wind induced vibrations. Eng Failure Analysis 2014;43:198-220.   DOI
8 Goodenough GA, Moore LE. The strength of chain links, Engineering Experiment Station. Bulletin No.18. University of Illinois; 1907. 29 p.