• Composites Research
• /
• 제21권1호
• /
• pp.22-29
• /
• 2008

본 논문은 유리섬유 에폭시 면재에 알루미늄 하니컴 샌드위치 복합재가 적용된 저상버스 차체에 대한 정면충돌과 전복에 대한 특성에 대해 연구하였다. 이때 충돌과 전복 해석은 외연유한요소 해석 프로그램인 LS-DYNA3D를 이용하였다. 차체 구조물에 적용되는 적층 복합재 면재에 대해 기계적 특성시험을 통하여 물성을 획득하였고, 직교이방성 특성을 갖는 하니컴 심재의 물성은 유효등가손상 모델을 적용하였다. 저상버스의 충돌 해석은 60km/h의 속도로 정면충돌 사고를 모사하여 해석을 수행하였고, 전복해석은 유럽 안전법규 ECE-R66의 시험 방법을 고려하여 해석하였다. 저상버스의 정면충돌과 전복에 대해 운전자와 승객의 생존 공간 안전성에 관한 결과를 보여준다. 또한, 수정된 Chang-Chang 파손기준식은 충돌과 전복해석에 대한 복합재 구조물의 파손 모드 예측에 추천된다.

• Structural Engineering and Mechanics
• /
• 제52권6호
• /
• pp.1085-1098
• /
• 2014

Plastic mechanism analysis of structures subjected to large deformation has long been used in order to determine collapse mechanisms of steel structures, and the energy absorbed in plastic deformation during such collapses. In this paper the technique is applied to vehicle roof structures that undergo large plastic deformation as a result of rollover crashes. The components of such roof structures are typically steel spot-welded hat-type sections. Ten different deformation mechanisms are defined from investigations of real-world rollover crashes, and an analytical technique to determine the plastic collapse load and energy absorption of such mechanisms is determined. The procedure is presented in a generic manner, such that it may be applied to any vehicle structure undergoing a rollover induced collapse. The procedure is applied to an exemplar vehicle, in order to demonstrate its application in determining the energy absorbed in the deformation of the identified collapse mechanisms. The procedure will be useful to forensic crash reconstructionists, in order to accurately determine the initial travel velocity of a vehicle that has undergone a rollover and for which the post-crash vehicle deformation is known. It may also be used to perform analytical studies of the collapse resistance of vehicle roof structures for optimisation purposes, which is also demonstrated with an analysis of the effect of varying the geometric and material properties of the roof structure components of the exemplar vehicle.

• 한국전자통신학회논문지
• /
• 제16권3호
• /
• pp.571-576
• /
• 2021

물류 창고 등에서 지게차 사용은 일반화되어 있으나 최근에는 지게차 전도 사고가 빈번하게 발생하고 있다. 또한 일반적으로 어떤 문제를 해결하기 위해서는 컴퓨터를 이용한 시뮬레이션이나 축소된 하드웨어로 구성한 시뮬레이터를 이용한 문제 해결을 시도하고 있다. 이에 본 논문에서는 지게차의 전도 예방을 위해 기존 지게차의 문제점을 분석하고 지게차의 전도 예방을 위한 기구 개념을 설명한다. 또한 지게차 전도 예방을 위한 시뮬레이터 시스템 구성과 설계된 시뮬레이터를 제시하고자 한다.

• 한국자동차공학회논문집
• /
• 제7권7호
• /
• pp.195-201
• /
• 1999

In Rollover crashes, the development of bus structure to ensure the maintenance of survival space for passengers is very important . So, this paper focuses on understanding the possibility of efficient structural development considering rollover strength through computer simulation using the commercial code, LS-DYNA3D at the initial stage of vehicle development structural members, and impact boundary conditions required by ADR59(Australian Design Rule 59)were applied. In order to confirm the validity of the computational results, the test results. After the usefulness of this method of analysis was confirmed , we have proposed the effective modificationfor rollover strength.

• 대한기계학회논문집A
• /
• 제28권7호
• /
• pp.992-998
• /
• 2004

During the tube hydropiercing, the region adjacent to the pierced hole will be deformed and will be drawn away from the die block as the punch advances through the wall of the tube. The deformation in the region may range from a substantially flat form to a countersunk form, so called rollover. In this study, the effects of material properties, shape of piercing punches, roundness of tube surface and internal pressure within the tube during piercing on the rollover have been investigated experimentally. The results provide the quantitative variation of rollover at given hydropiercing parameters, and a relationship between the deformed radius and the rollover caused by the deformation has been established.

• 자동차안전학회지
• /
• 제12권4호
• /
• pp.54-60
• /
• 2020

In a previous study, an investigation of occupant behaviors and injuries (to the head and chest) was performed during vehicle impact loading cases in order to ensure the safety of wheelchair passengers on a bus. The computational results showed overall safety tolerances of wheelchair occupants under different accident configurations. The bus crashworthiness is described as the capability of a bus to protect occupants during rollover loadings. The residual space containing occupants should be undamaged without any intrusions. However it is necessary to evaluate the residual space according to the bus occupant kinematic analysis under the rollover crash simulation. This study focuses on the evaluation of occupant behaviors during rollover loading cases in order to ensure the safety of bus passengers sitting in general seats and wheelchairs and evaluates the residual space of the bus by analyzing the bus occupant kinematics.

• 자동차안전학회지
• /
• 제10권1호
• /
• pp.20-26
• /
• 2018

The fatality of rollover accidents in motor vehicle crashes is high despite their low incidence. Through the investigation of a 12-passenger van rollover accident in which 10 passengers were involved, we intend to analyze the correlation between the severity of the injury and the position of the occupants. We collected accident information from medical records, interviews, photo-images of the damaged van, field surveys, and the results of the Korean New Car Assessment Program (KNCAP). Based on the occupants' position, we classified injury sites and estimated injury severity. Passenger injury severity was evaluated by trauma score calculation. The initiation type of the rollover accident was passenger side 'fall-over' and the Collision Deformation Classification (CDC) code for the damaged van was 00TDZO3. The crash of the van involved 10 passengers, with an average age of $16.3{\pm}4.2years$. Few of the occupants had fastened seat belts at the time of the incident, and there was no airbag installed. One patient sustained severe liver injury and another was diagnosed with a fracture of the right humerus. The most common injuries were at the upper extremities and the neck. The average of Injury Severity Score (ISS) was $4.8{\pm}5.9$, and the average ISS of right-seated, mid-seated and left-seated occupants was $7.5{\pm}9.3$, $1.5{\pm}0.7$, and $3.3{\pm}2.1$ respectively (p>0.05). In the rollover (to-passenger side) accident of occupant unfastened, the average ISS of right-seated occupants (near side) was higher, but there was no statistically significant difference.

• 한국인터넷방송통신학회논문지
• /
• 제18권2호
• /
• pp.227-235
• /
• 2018

최근 자동차 교통량의 증가로 인해 차량 전복사고가 급증하여 이에 따른 인명피해가 증가해왔으며, 이를 방지하기 위한 차량충돌 실험장비 및 해석프로그램 개발 등의 다양한 기술이 진보되고 있다. 본 연구에서는 적용한 차량모델은 미국 FORD사의 EXPLORER 차종이고, Rollover 해석은 차량충돌해석에 상용되고 있는 PC-Crash 프로그램을 이용하여 SUV의 전복사고 거동 및 충돌속도를 예측하였다. 그 해석결과로 FMVSS No. 208 법규를 통한 SUV차량의 실제 Rollover 거동과 비교할 때 유사한 결과를 보여주었으며, 충돌속도 및 롤각의 특성은 1000 msec 이후부터는 다소 오차율이 커지는 경향을 나타냈다. 그리고 NHTSA의 데이터베이스를 활용하여 고찰한 결과로 충돌속도 15~77 km/h, 충돌각도 $22{\sim}74^{\circ}$ 범위에서 전복사고가 가장 많이 발생함을 나타냈고, 실제 사고사례를 적용함으로써 차량 출발 위치, Roof 파손위치, 정지위치를 재현시켜 차량 Roof가 파손될 때 차량속도 및 충돌시간을 예측할 수 있었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2007년도 하계종합학술대회 논문집
• /
• pp.101-102
• /
• 2007

We demonstrate a novel calibration-free vehicle crash and rollover detect system by using a 3-axis accelerometer as a sensor element.

• 소성∙가공
• /
• 제20권3호
• /
• pp.214-221
• /
• 2011

In recent years, automotive seat components have been manufactured by the fine blanking process, allowing an improvement of dimensional accuracy at sheared surface in series production. However, the rollover has increased and die failures have occurred more frequently when manufacturing gears by fine blanking. Consequently, important goals for manufacturing seat recliner parts with gears have been to decrease the rollover as well as to improve the tool life. In this study, the half blanking and shaving processes were introduced to improve aforementioned problems for the lower tooth, the main component of a seat recliner. For this purpose, the half blanking process was optimized using the finite element (FE) analysis and design of experiment (DOE). The optimized conditions resulting from this study were an offset of 0.2 mm, a clearance of 0.1 mm and a penetration depth of 4.5 mm. Fine blanking experiment conducted under the optimal condition resulted in a rollover depth decrease from 1.9 to 1.3 mm, and no die failure occurrence.