• Journal of Bio-Environment Control
• /
• v.16 no.2
• /
• pp.89-95
• /
• 2007

This study was accomplished to compare energy saving effects of several heat insulation materials in greenhouse and to develop new automatic opening and closing equipment which is suitable to the most effective heat insulation material. To find out more effective heat insulation material, the magnitude of heat transfer occurred through aluminum screen (ALS), non-woven fabric (NWF), double-layer aluminum screen with chemical cotton sheet (DAL), and multi-layer fabric screen material quilted with non-woven fabric, chemical cotton, poly foam, and polypropylene (MLF) were compared relatively. The results showed that the relative magnitude of heat transfer occurred through MLF was lower than DAL and ALS by 23.3% and 43.0% respectively. MLF screen material was the most effective compared with other heat insulation materials. But because of thickness, there was a need of new mechanism for automatic operation in greenhouse. Accordingly, new screen system using MLF-thick but profitable for keeping warm in greenhouse-was developed. Opening & closing equipment was designed to roll MLF with pipe axis during opening process and pull MLF with string during closing process with electric motors, clutches, drums, and so on. In hot pepper cultivation and energy saving test during winter time, the early stage yield of pepper under MLF screen system was higher than NWF by 27%, and gasoline consumption of MLF screen system was lower than NWF by 46%.

• The Korean Journal of Physiology and Pharmacology
• /
• v.5 no.2
• /
• pp.123-131
• /
• 2001

To investigate the effects of electrical stimulation on vestibular compensation, which is the recovery of vestibular symptoms following unilateral labyrinthectomy (UL), intermittent electrical stimulation was applied to the injured vestibular portion in Sprague-Dawley rats. Vestibuloocular and vestibulospinal reflexes, electrical activity and expression of c-Fos protein in medial vestibular nuclei (MVN) were measured with time following UL. Spontaneous nystagmus occurred with frequency of $2.9{\pm}0.2$ beats/sec at 2 hours after UL and disappeared after 72 hours. Electrical stimulation decreased the frequency of nystagmus significantly till 24 hours after UL. Roll head deviation was $107{\pm}9.7^{\circ}$ at 2 hours after UL and the deviation was maintained till 72 hours, but electrical stimulation decreased the deviation significantly 6 hours after UL. Resting activity of type I neurons in ipsilateral MVN to the injured vestibular side decreased significantly compared with control at 6 and 24 hours after UL, but the activity of type I neurons was recovered to control level by electrical stimulation at 24 hours after UL. Gain of type I neurons induced by sinusoidal rotation of 0.1 Hz decreased significantly till 24 hours after UL, but electrical stimulation restored the activity at 24 hours. The gain of type II neurons decreased significantly at 6 hours after UL, but electrical stimulation restored the activity. Expression of c-Fos protein was asymmetric between bilateral MVN till 24 hours after UL, but the asymmetry disappeared by electrical stimulation 6 hours after UL. These results suggest that electrical stimulation to the injured vestibular portion facilitates vestibular compensation following UL by restoration of symmetry of neuronal activity between bilateral vestibular nuclei resulting from increased activity in ipsilateral vestibular nuclei to the injured side.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.3
• /
• pp.479-485
• /
• 2006

The double gate(DG) MOSFET is a promising candidate to further extend the CMOS scaling and provide better control of short channel effect(SCE). DGMOSFETs, having ultra thin undoped Si channel for SCEs control, ale being validated for sub-20nm scaling. A novel analytical transport model for the subthreshold mode of DGMOSFETs is proposed in this paper. The model enables analysis of short channel effect such as the subthreshold swing(SS), the threshold voltage roil-off$({\Delta}V_{th})$ and the drain induced barrier lowering(DIBL). The proposed model includes the effects of thermionic emission and quantum tunneling of carriers through the source-drain barrier. An approximative solution of the 2D Poisson equation is used for the distribution of electric potential, and Wentzel-Kramers-Brillouin approximation is used for the tunneling probability. The new model is used to investigate the subthreshold characteristics of a double gate MOSFET having the gate length in the nanometer range $(5-20{\sim}nm)$ with ultra thin gate oxide and channel thickness. The model is verified by comparing the subthreshold swing and the threshold voltage roll-off with 2D numerical simulations. The proposed model is used to design contours for gate length, channel thickness, and gate oxide thickness.

• Food Science of Animal Resources
• /
• v.28 no.3
• /
• pp.363-372
• /
• 2008

This study was conducted to investigate the relationship between the socio-demographic factors and the Korean consumers' palatability evaluation and to collect the sensory information for development of prediction palatability model of Hanwoo beef. Ten cuts [Abjin (short plate), Bosup (top sirloin), Cheggt (striploin), Dngsim (loin), Guri (chuck tender), Hongduke (eye of round), Moksim (chuck roll), Sulgit (bottom round), Udoon (top round), Yangji (brisket)] were separated from 5 Hanwoo steer beef (28-30 months old) and prepared with the same manner for 3 different cooking methods such as boiling, grilling, and roasting. The cooked beef samples were served to 650 consumers recruited from Seoul, Joongbu, Honam and Youngnam locations and evaluated as tenderness, juiciness, flavor, and overall acceptability. The consumer living location, age, gender, occupation, monthly income, and cut were significantly related with the scores of sensory properties when steer beef were cooked as boiling cooking (p<0.05). The eating habit and aging of beef were also significantly related with the tenderness and overall acceptability scores (p<0.01) when beef were cooked as boiled. In grill cooking, living location, aging, and cut had the significant effect on the sensory properties of Hanwoo steer beef (p<0.01). When steer beef were prepared by Korean traditional roast cooking, consumer's sensory scores were significantly different by the living location, age, occupation, monthly income, eating habit of consumers, aging and beef cut (p<0.001). Also, results from the principal component analysis showed that palatability scores of Korean consumers were decided with different contribution rate of tenderness, juiciness, flavor and overall acceptability for beef cut depending on cooking methods. In conclusion, Korean consumers' palatability for Hanwoo steer beef were related to the socio-demographic factors and the sensory scores were different by cut and cooking methods.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.31 no.2
• /
• pp.151-158
• /
• 2011

This study was carried out in 2010 to investigate the utilization and nutritive value of native grasses, such as Phragmites communis and Miscanthus sinensis which might reduce the cost of feeding domestic cattle. The regions within the Civilian Control Line in Paju and Sihwa region in Ansan were surveyed. In Paju, the yearly silage production was 900 MT harvested from 90 ha (10 MT/ha). About 30~50% of these were sold out at the marketing price of 52,000~55,000 Won per roll (130~137.5 Won/kg). Regrown Miscanthus sinensis of 70 cm in length contained 9.6% of crude protein (CP), 82.4 of relative feed value (RFV), and 67.7% of in vitro dry matter digestibility (IVDMD). Regrown Phragmites communis of 70 cm in length contained 13.8% of CP, 84.3 of RFV, and 67.9% of IVDMD. As harvesting was delayed, the quality was decreased dramatically. In Ansan region, Phragmites communis plantation covers 100 ha. The silage production was 550 MT from the area of 50 ha (11 MT/ha) in 2009. And the marketing price was 50,000 Won per roll. But in 2010 only a small amount of grasses could have been baled due to frequent and much rainfall from spring to summer season. However, the good forage quality was observed from regrown Phragmites communis of 80 cm in length, 12.9% CP, 99.8 RFV and 66.6% IVDMD, while that of late matured grasses was very low, 2.2% CP, 52.9 RFV and 36.4% IVDMD, greatly lower than forage quality of rice straw. The quality of grasses at bloom stage of 150 cm in length was similar to that of rice straw, showing 4.5% CP, 59.9 RFV and 42.2% IVDMD. In conclusion, the overall quality of most native grasses in this survey were very poor. Therefore, we recommend that Phragmites communis and Miscanthus sinensis should be harvested during June or July to obtain better forage quality which is richer in forage values than rice straw. Production of high quality forage crops was also desirable for self sufficiency of forage.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.1
• /
• pp.63-74
• /
• 2012

In Korea, grouting has been mostly designed and constructed by experiences without expert knowledge and theoretical study. So there are a lot of problems related to the quality and safty of grouting. Therefor, in this paper the quality management skills and method were discussed through out by using the auto-grouting method and field test of grouting for the construction. Through the limit water injection test of the soil, it make the optimum injection pressure and injection speed of grouting, and through the lugeon test of the rock, it make assess the permeability of before and after grouting. In order to prevent the hydraulic fracture of soil and break away from the grouts if it apply four kinds of mode of grouting stop criteria, injection effects can be improved. From the above characteristcs designers evalute the fitness values of injection pressure(p), injection speed(q) and grouting penetration time(t). So far, to record and manage pressure(p) and speed(q) of grouting autographic devices such as intergation flow-meter usually record data in a roll of paper. Intergration flow-meter can record grouting flow quantity exactly, but the recorded pressures differ from the any basis such as intitial, intermediate and final point. Therefore, it has been argued that is a need of reliable method to describe the connection between the pressure recorded by an intergration flow-meter and the special properties of the grouting target ground. auto-grouting method can describe the reliable connection between the grouting pressure and the special properties of the grouting target ground. So, in this paper by using auto-grouting method, it is expected that to secure basis of quality control techniques construction.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.3
• /
• pp.67-72
• /
• 2015

A study on thermal properties for a single-layer metal and a 2-ply metal (clad metals) was investigated for the application of heat sink. For the single-layer metal, a stainless steel (STS) and an aluminum (Al) were selected. Also, a roll bonded clad metal with STS and Al was chosen for the 2-ply metal. The thermal conductivity of the sample was obtained from the thermal diffusivity measured by the light flash analysis (LFA), specific heat and density. Measured thermal property values were compared with the calculated values using the data from the references. For the single-layer metal, measured values for the thermal diffusivity and thermal conductivity were smaller than calculated values. Differences between measured and calculated values were about 6% and 18% for the STS and Al samples, respectively. For the clad metals, however, a large difference (55%) was observed. Here, a relatively small thermal conductivity measured by LFA was due to the existence of a interface between STS and Al in the clad metal. Such a interface reduces the moving velocity of free electrons and phonons in the clad metal. For the development of a high performance heat-issipation module with the multi-layer structure, the control of interface properties which determine thermal properties was confirmed to be important.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.306-311
• /
• 2017

This paper deals with the design optimization of the kinematic characteristics of an automotive suspension system. The kinematic characteristics of the suspension determine the attitude of the wheels, such as the toe and camber, which not only relates to tire wear during driving, but also greatly affects the control of the vehicle and its stability, which corresponds to the motion performance of the vehicle. Therefore, it is very important to determine the characteristics of the suspension mechanism at the initial stage of the design. In this study, a displacement analysis is performed to determine the kinematic properties of the suspension for the McPherson strut suspension. For this purpose, a set of constraint equations for the joints constituting the suspension mechanism was established and a program was developed to solve them. We also used ADS, a design optimization program, to obtain the desired kinematic characteristics of the suspension. As the design variables for optimization, we used the coordinates of the hard points, which are the points of attachment of the suspension to the vehicle body, and are defined as the summation of the toe-in for the up and down movement of the wheel as the objective function. As the constraint functions, the maximum camber angle and minimum roll center height, which are design requirements, are considered. As a result of this study, it was possible to determine the optimal locations of the hard points that satisfy both constraint functions and minimize the change of the toe-in.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.250-254
• /
• 2002

Intergranular corrosion of austenitic stainless steels is a conventional and momentous problem during welding and high temperature use. One of the major reasons for such intergranular corrosion is so-called sensitization, i.e., chromium depletion due to chromium carbide precipitation at grain boundaries. Conventional methods for preventing sensitization of austenitic stainless steels include reduction of carbon content in the material, stabilization of carbon atoms as non-chromium carbides by the addition of titanium, niobium or zirconium, local solution-heat-treatment by laser beam, etc. These methods, however, are not without drawbacks. Recent grain boundary structure studies have demonstrated that grain boundary phenomena strongly depend on the crystallographic nature and atomic structure of the grain boundary, and that grain boundaries with coincidence site lattices are immune to intergranular corrosion. The concept of "grain boundary design and control", which involves a desirable grain boundary character distribution, has been developed as grain boundary engineering. The feasibility of grain boundary engineering has been demonstrated mainly by thermomechanical treatments. In the present study, a thermomechanical treatment was tried to improve the resistance to the sensitization by grain boundary engineering. A type 304 austenitic stainless steel was pre-strained and heat-treated, and then sensitized, varying the parameters (pre-strain, temperature, time, etc.) during the thermomechanical treatment. The grain boundary character distribution was examined by orientation imaging microscopy. The intergranular corrosion resistance was evaluated by electrochemical potentiokinetic reactivation and ferric sulfate-sulfuric acid tests. The sensitivity to intergranular corrosion was reduced by the thermomechanical treatment and indicated a minimum at a small roll-reduction. The frequency of coincidence-site-lattice boundaries indicated a maximum at a small strain. The ferric sulfate-sulfuric acid test showed much smaller corrosion rate in the thermomechanically-treated specimen than in the base material. An excellent intergranular corrosion resistance was obtained by a small strain annealing at a relatively low temperature for long time. The optimum parameters created a uniform distribution of a high frequency of coincidence site lattice boundaries in the specimen where corrosive random boundaries were isolated. The results suggest that the thermomechanical treatment can introduce low energy segments in the grain boundary network by annealing twins and can arrest the percolation of intergranular corrosion from the surface.

• Journal of Society of Preventive Korean Medicine
• /
• v.4 no.1
• /
• pp.32-50
• /
• 2000

On the process of research in the plan on oriental medical participation in the industrial health sponsored by BK21 project, we carried out the oriental medical health examination program for workers during former half-year We reached the conclusion as follows, 1. The oriental medical health examination program is contents and formalities that should be determined by present industrial health system, based on the oriental medical system and scholastic character, and included probability of the western and oriental medical cooperation. 2. The oriental medical health examination program can promote capability of individual health management and productive power of workers, and it is capable to manage on the self-conscious symptoms and macroschophically approach to their environment 3. The oriental medical health examination program that we have developed, is flow as questionare, understanding of working environment, information of result and later management. It is composed of three fields as follow , first, use of pulse diagnostic apparatus, understanding of the health promotion life style, and diagnosis of the oriental medical doctor, second, analysis of constitution, third, photographing for understanding of the musculoskeletal disorders, questionare for musculoskeletal self-conscious symptoms, and diagnosis of oriental medical doctor. 4. The oriental medical health examination program that we have developed, progressive from the view point of health, makes the oriental medical doctor's roll more important. It is the first trial at the western and oriental medical cooperation and characterized by excellence about musouloskeletal disorders. But it need to be improved in aspects of time and specialist on the health examination, diagnostic apparatus, control of examinant and later management. So we think that it needs research on the employment of health examination specialist, establishment of later management system, development of significantly diagnosable standard and assessable form on the health examination, and contents of health examination on the western and oriental medical cooperation.