• 소음진동
• /
• 제9권3호
• /
• pp.544-553
• /
• 1999

A 3-dimensional helical rod finite element is devloped for the dynamic analysis of cylindrical springs. Element matrices are formulated using the Galerkin's method, and an exact static deflection curve is used as a shape function. Because the resultant mass and stiffness matrices of the model are symmetric, effective direct solution method can easily be applied for analysing dynamic behavior of springs. The model is used to analyze the dynamic characteristics of a typical automotive valve spring. The effectiveness of the developed helical rod element is verified by comparing the results of the proposed method with those of a classical theory and experiments. The helical element developed in this study is superior to a straight beam element and a 2-dimensional curved beam element for this problem.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.959-962
• /
• 2000

In this study, the micro shaft was fabricated by high speed etching process. The integration of the kinetic energy of circumference and the effect of etching takes less time to fabricate the micro shaft than any other conventional methods. First, the end part of the rod(SKD11) was dipped in chemical solution(FeCl$_3$) and the rod rotated at high speed(3500-10000rpm). Experimental setup was simply composed of high speed motor. chemical solution and $\Phi$ 1 mm rod. The main factors of diameter control are chemical concentration, reaction time and rpm. has a result. the diameter of the dipped rod was decreased by 200${\mu}{\textrm}{m}$ by high speed rotation and its shape and surface was good. From this experiment, we found the possibility to manufacture micro shaft without very expensive equipment.

• 한국결정성장학회지
• /
• 제4권2호
• /
• pp.190-198
• /
• 1994

자체 제작한 EFG 장치를 이용하여 ${alpha}-Al_2O_3$ rod 형태의 단결정을 육성하였다. EFG법의 원리를 연구하여 성장 조건을 수립하였고 성장한 단결정의 결함 voids, striation, 균열, 과 냉각 현상을 광학현미경으로 분석하였다.

• 태양에너지
• /
• 제19권3호
• /
• pp.93-100
• /
• 1999

The objective of this experimental study was to investigate the characteristics of heat transfer and air flow in two-dimensional impinging jet system, in which hybrid rods have been set up in front of heating surface in order to increase heat transfer. The shape of hybrid rods had a cross section made with a half of circular cross section and that of rectangular. This time, the clearance from hybrid rod to heating surface(C=1, 2, 4mm) and the pitch between each hybrid rods(P=30, 40, 50mm) changed for the transition region(H/B=10). And this result compared with the experimentation without hybrid rod. As a result, heat transfer performance was best under the condition of C=1mm, in case clearance changed, and as the pitch is 30mm, it is largely influenced by eddies and acceleration in case pitch of hybrid rod changed.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2013년도 춘계학술대회 논문집
• /
• pp.207-207
• /
• 2013

증착온도 $700^{\circ}C$, 산소분압30mTorr에서 c-plane 사파이어 기판위에 PLD를 이용하여 ZnO nano-rod를 합성하였다. 거리가 멀어질수록 rod의 직경과 증착율이 감소하는 것을 확인 하였다. 이는 ablated particle이 가진 kinetic energy가 감소되고, cluster ion의 형성으로 인해 고온에서 rod가 형성될 수 있는 것으로 이해된다. 고진공에서는 kinetic energy가 감소되기 어렵기 때문에 nano-rod shape 형성은 불가능 할 것이며, ZnO와 같은 wurtzite 구조를 가진 물질의 타겟을 사용하여 cluster 형성 분위기에서 증착한다면 비슷한 경향을 나타낼 것으로 예상된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.609-616
• /
• 2001

The vibrational characteristics of nonuniform circular rods have been studied theoretically and experimentally in this paper. The differential equation of torsional motion expressed in terms of the angular displacement has been solved exactly and approximately for a stepped circular rod and for a conically-tapered rod. Solutions of the boundary-value problem have yielded the natural frequencies, mode shapes and forced responses of the rods. The theoretical solutions of forced response have been verified by comparing them with experimental ones.

• 한국정밀공학회지
• /
• 제13권11호
• /
• pp.124-131
• /
• 1996

The dynamic material property of Mn-B ally high-strength steel is investigated through the rod impact test which is one of simple test methods for the analysis of the material behavior under high-strain-rate. Rod impact test is performed to produce the deformed shape of rod and analyzed by the one-dimensional theory based on conservation law and the two-dimensional hydrocode AUTODYN-2D. The dynamic yield stress is determined and compared with the static yield stress to investigate the strain-rate sensitivity of Mn-B alloy high-strength steel.

• 대한화장품학회지
• /
• 제10권1호
• /
• pp.13-23
• /
• 1984

The fluorescence intensity rations (F2.F1) of excimer (F2) to monomer (F1) of pyrene were measured as a function of the concentration of sodium dodecyl sulfate (SDS). It was found that there were not gross changes in size and shape of sphere-shape micelles in the first micelle concentration, while at concentrations above the second critical micelle concentration (CMC) the micelles grew in size with increasing concentration. Fluorescence intensities of 8-anilinonaphthalene 1-sulfonate (ANS) were also monitored as a micellar probe with varying concentrations of SDS. Results suggested that a phase transition from sphere-shaped micelles to hemicapped rod-like micelles occurred at the second CMC (17). A general formula for the axial ratio of ellip-soil-shaped micelle in the first micelle concentration was suggested. According to this general formula, the axial ratio of SDS, sodium lauryl ether sulfate and sodium laurate were 1:1, 5:2, and 5:3, respectively. The electrolyte-induced phase transition from spherical to hemicapped rod-like micelles occurred and the size of hemicapped rod-like micelles grew with increasing electrolyte concentrations. The maximum concentrations of solubilzed benzene in sphere-shaped micelles and hemicapped rod-like micelles were measured by differential spectrohpotometry. The hemicapped rod-like micelles in the presence of electrolytes grew in size with increasing amount of benzene solubilized.

• 한국수소및신에너지학회논문집
• /
• 제28권1호
• /
• pp.70-76
• /
• 2017

To synthesize copper nanoparticle a thermal decomposition was adopted. And to solve the problem of surface oxidation of the synthesized copper powder an electroless Ag plating method was used. The size and shape of synthesized Cu nanoparticle were affected by the size of copper oxalate used as a precursor, reaction solvent, reaction temperature and amount of reducing agent. Especially reaction solvent is dominant factor to control shape of Cu nano-particle which can have the shapes of sphere, polygon and rod. In case of glycerol, it produced spherical shape of about 500 nm in size. Poly ethylene produced uniform polygonal shape in about 700 nm and ethylene glycol produced both of polygon and rod having size range between 500 and 1500 nm. The silver coated copper powder showed a high electrical conductivity.

• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 2002년도 추계 학술논문발표회 논문집
• /
• pp.281-285
• /
• 2002

Although DC ground resistance is a good index of performance for a grounding system, it does not reflect the grounding performance during the transient states. Besides, impulse ground impedance, which is defined by a ratio of the peak value of transient ground potential rise to the peak value of impulse current, cannot be an absolute performance index due to its dependence on impulse current shape. In this paper, a grounding performance of needle-typed ground rod has been compared with simple ground rod using HIFREQ[1], which is an engineering electro-magnetic code based on MoM (Method of Moment).