• 한국추진공학회지
• /
• 제12권3호
• /
• pp.16-23
• /
• 2008

30 톤급 실물형 연소기의 산화제 매니폴드에서의 유동 균일성 문제를 파악하기 위하여 유동해석을 수행하였다. 분사기의 모사를 위하여 다공성 매질로 가정하고, 다공성도 (porosity)를 조절하여 분사기 차압을 모사하였다. 수직 및 수평 분리막에서의 구멍의 직경, 입구 포트의 형상에 따른 유동의 균일성 정도를 파악하고, 개선된 설계 수정안을 제시하였다. 수직 및 수평 분리막 구명의 형태와 배치 수정을 통하여 유량 균일성을 향상시킬 수 있음을 확인하였다.

• 한국연소학회지
• /
• 제22권1호
• /
• pp.46-52
• /
• 2017

High-frequency combustion instabilities may occur during the development of feasible engine combustors. These instabilities can result in irreparable damages to the wall of combustors or the degradation of engine performance. So, it is essential to identify injectors that have high stability characteristics during the early stages of development. The objective of present study was to assess the stability of coaxial injectors and an impinging injector with different recess lengths in order to develop stable injectors optimally. Stability margin was evaluated based on the distance from operating condition to the unstable regions. A simulating combustion test method was used to analyze the stability of injectors. A small-scale combustion chamber was designed to simulate the first tangential acoustic mode of the actual combustor. Gaseous oxygen and a mixture of methane and propane were used as simulant propellants to satisfy their flow similarity to the actual propellants of a combustor in a liquid rocket combustor. The results indicated that injectors having small recess lengths showed relatively large combustion stability margins. For the injectors of large recess lengths, instability regions with large and super-large amplitude oscillations were observed. Thus, injector with shorter recess lengths had a higher stability than that of longer one due to the different mixing processes.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1494-1498
• /
• 2004

Transition sequence of rocket to ramjet was simulated numerically for a two-dimensional axisymmetric can-type ramjet engine. Multi-species preconditioned Navier-Stokes equations with $k-{\varepsilon}$ turbulence model and finite-rate chemistry model was employed. To calculate transition sequence, initial flow-field conditions for inlet diffuser with closed port-cover was computed first, and then that result was applied as initial conditions after port-cover opened. Terminal shock was developed as a result of increased pressure in a combustor due to combustion and ramjet operated at supercritical condition. For a smaller nozzle throat area, buzz instability was occurred. Strong pressure oscillations were observed as a result of forward and backward movement of terminal shock and those oscillations were not damped out.

• Journal of Mechanical Science and Technology
• /
• 제18권6호
• /
• pp.1010-1018
• /
• 2004

This study presents the methodological aspects of combustion instability modeling and provides the numerical results of the model (sub-scale) combustion chamber, regarding geometrical dimensions and operating conditions, which are for determining the combustion stability boundaries using the model chamber. An approach to determine the stability limits and acoustic characteristics of injectors is described intensively. Procedures for extrapolation of the model operating parameters to the actual conditions are presented, which allow the hot-fire test data to be presented by parameters of the combustion chamber pressure and mixture (oxidizer/fuel) ratio, which are customary for designers. Tests with the model chamber, based on the suggested scaling method, are far more cost-effective than with the actual (full-scale) chamber and useful for injector screening at the initial stage of the combustor development in a viewpoint of combustion instabilities.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제27회 추계학술대회논문집
• /
• pp.267-270
• /
• 2006

Polyethylene-GOX 조합 추진제를 이용한 소형 하이브리드 로켓 모터의 연소 특성에 관한 연구를 수행하였다. 그레인 두께에 대하여 평균화된 여러 형태의 상관관계식을 실험 결과와 비교하였으며, 연료 발생율은 연소실로 유입되는 산화제 유량율에 대하여 크게 변화지 않는 것으로 나타났다.

• Journal of Mechanical Science and Technology
• /
• 제19권9호
• /
• pp.1821-1832
• /
• 2005

This study realizes the conceptual method to predict combustion instability in actual full-scale combustion chamber of rocket engines by experimental tests with model (sub-scale) chamber. The model chamber was designed based on the methodologies proposed in the previous work regarding geometrical dimensions and operating conditions, and hot-fire test procedures were followed to obtain stability boundaries. From the experimental tests, two instability regions are presented by the parameters of combustion-chamber pressure and mixture (oxidizer/fuel) ratio, which are customary for combustor designers. It is found that instability characteristics in the chamber with the adopted jet injectors can be explained by the correlation between the characteristic burning or mixing time and the characteristic acoustic time: In each instability region, dynamic behaviors of flames are investigated to verify the hydrodynamically-derived characteristic lengths of the jet injectors. Large-amplitude pressure oscillation observed in upper instability region is found to be generated by lifted-off flames.

• 한국군사과학기술학회지
• /
• 제9권1호
• /
• pp.117-124
• /
• 2006

Experiments on film cooling were performed with a small scale rocket engine homing liquid oxygen (LOx) and Jet A-1(jet engine fuel). Film coolants(Jet A-1 and water) were injected through the film cooling injector. Film cooled length and the outside wall temperature of the combustor were determined for chamber pressure, and the different geometries(injection angle) with the flow rates of film coolant. The loss of characteristic velocity due to film cooling was determined for the case of film cooling with water and Jet A-1. As the coolant flow increases, the outside wall temperatures decrease but the decrease in the outside wall temperatures reduced over the 8 percent film coolant flow rate. The efficiency of characteristic velocity was decreased with the Increase of the film coolant flow rate.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.814-815
• /
• 2010

한국항공우주연구원에서는 한국형발사체 개발사업의 일환으로 KSLV-II 발사체의 추진기관 성능시험을 위한 연소기, 엔진 등 대형 추진기관 시험설비를 구축 및 운영 예정에 있다. 이에 앞서 해외 기술 선진국에서의 과거 발사체 개발에 적용하였던 대형시험설비에 대한 사례를 조사 및 검토함으로써 향후 국내 실정에 적합한 한국형발사체 시험설비 개발 계획에 참고하고자 한다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.374-377
• /
• 2017

TDACS의 작동 성능 검증 시험을 수행하기 위해서 유동시험 장치를 설계하였다. 이를 위해서 고체 추진기관 연소관 및 유동시험에서의 압력 거동을 모델링하였고 각 모델의 동적 특성을 나타내는 응답 시간을 구하였다. 본 논문에서는 유동시험 장치의 시스템 응답 시간을 고체추진기관 연소관의 특성과 같아지는 조건을 구하고 이를 설계에 반영함으로써 연소 환경에서 동적 응답특성을 검증하는 것과 유사한 결과를 갖도록 하였다.

• 한국항공우주학회지
• /
• 제36권5호
• /
• pp.491-496
• /
• 2008

본 연구에서는 RBCC (Rocket Based Combined Cycle)엔진이나 기존 램제트 추진기관의 초기 추력 제공에 과산화수소 가스발생기를 이용하는 새로운 추진시스템을 제안하였고, 기초 연구 수행으로서 촉매 분해된 과산화수소 제트에 케로신을 분사하여 자연발화 및 연소 특성을 연구하였다. 과산화수소는 촉매 베드를 통하여 분해된 후 축소노즐을 통해 연소실로 분사됐으며 이 제트에 인젝터를 통하여 수직으로 케로신을 액상으로 분무하였다. 연소실내에서의 온도와 압력을 측정하여 점화를 확인하고 자연발화 특성을 조사하였다. 400°C의 연소실 온도와 연료와 산화제 혼합비 0.6이상에서 자연발화와 안정적인 연소가 가능하였다. 이 결과를 통하여 램제트의 새로운 초기 가속장치의 가능성을 확인할 수 있었다.