• Journal of Power Electronics
• /
• 제18권5호
• /
• pp.1434-1447
• /
• 2018

The control design of inductive power transfer (IPT) systems has attracted a lot of attention in the field of wireless power transmission. Due to the high-order resonant networks and multiple loads in IPT systems, a simplified model of an IPT system is preferred for analysis and control design, and a controller with strong robustness is required. Hence, an active disturbance rejection control (ADRC) for IPT systems is proposed in this paper. To realize the employment of ADRC, firstly a small-signal model of an LC series-compensative IPT system is derived based on generalized state-space averaging (GSSA), then the ADRC is implemented in the designed IPT system. The ADRC not only provides superior robustness to unknown internal and external disturbances, but also requires few knowledge of the IPT system. Due to the convenient realization of ADRC, the designed IPT system retains its simple structure without any additional circuits. Finally, a frequency domain analysis and experimental results have validated the effectiveness of the employed ADRC, especially its robustness in the presence of frequency drifts and other common disturbances.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.346-346
• /
• 2000

We proposed a method of second-order iterative learning control with feedback, which shows an enhancement of convergence speed and robustness to the disturbances in our previous study. In this paper, we show that the proposed second-order iterative learning control algorithm with feedback is more effective and has better convergence performance than the algorithm without feedback in the case of the existence of initial condition errors. And the convergence woof of the proposed algorithm in the case of the existence of initial condition error is given in detail, and the effectiveness of the Proposed algorithm is shown by simulation results.

• 한국산학기술학회논문지
• /
• 제11권5호
• /
• pp.1597-1600
• /
• 2010

본 논문은 비선형 동적 신경망을 이용하여 직접 제어에 관한 연구이다. RBF 신경망을 이용한 제어입력과 근사화 오차 및 외란의 영향을 제거하기 위한 보조제어 입력으로 구성하였다. 외란이나 근사화 오차에 관계없이 플랜트와 기준모델 사이의 오차가 0이 되도록 하는 알고리즘을 구할 수 있었다. 시뮬레이션 결과는 매우 효과적이며 비선형 시스템의 만족스러운 학습 성능을 증명하였다.

• 제어로봇시스템학회논문지
• /
• 제10권10호
• /
• pp.915-921
• /
• 2004

In this paper, a variable structure controller(VSC) is used to control the position of the hydraulic servo system subjected to unknown disturbances. The system consists of two cylinders, which connected in series. One cylinder executes position control, the other executes force control to generate disturbances. In order to control each cylinder, interaction must be considered between two cylinders because two cylinders are connected in series. Therefore, the controller is designed regarding interaction between two cylinders as disturbances. Performance of the proposed controller was verified through experiments and compared to PID controller. The experiments showed that the proposed controller had a good performance and robustness.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.342-347
• /
• 1995

Loop shaping $H_{\infty}$control with normalized coprime factorization was applied to a servo-motor driven high-speed powitioning system. The high-gain controller was designed to attenuate the postion errors caused byfriction effects and extermal disturbances. The non-existence of limit cycle was analyzed, though there is actuator saturation. The designed $H_{\infty}$control system was experimently tested in a rotary index table. Results showed its effectiveness to improve postion accuracy with out any compensation scheme for friction, and robustness to model perturbation and external disturbances.ces.

• Journal of Power Electronics
• /
• 제19권2호
• /
• pp.497-508
• /
• 2019

The predictive speed control (PSC) strategy can realize the simultaneous control of speed and current by using one cost function. As a model-based control method, the performance of the PSC is vulnerable to model mismatches such as load torque disturbances and parameter uncertainties. To solve this problem, this paper presents a robust predictive speed control (RPSC) strategy for surface-mounted permanent magnet synchronous motor (SPMSM) drives. The proposed RPSC uses extended state observers (ESOs) to estimate the lumped disturbances caused by load torque changes and parameter mismatches. The observer-based prediction model is then compensated by using the estimated disturbances. The introduction of ESOs can achieve robustness against predictive model uncertainties. In addition, a modified cost function is designed to further suppress load torque disturbances. The performance of the proposed RPSC scheme has been corroborated by experimental results under the condition of load torque changes and parameter mismatches.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(3)
• /
• pp.185-188
• /
• 2001

In this paper, a cascade fuzzy control method is proposed, which presents a robustness of the effect of disturbances, and in which the number of rules of the controller increase linearly instead of exponentially with the number of input variables. The proposed fuzzy control method is composed of cascade structure. Each stage has a state and a change of state, and one consequent control variable, and previous consequent control variable is an input of next stage. Simulation of the proposed controller, which is applied to the linear and nonlinear system as SISO (single-input single-output) system, showed that the proposed control method has a good control performance and robustness of disturbances compared with a conventional fuzzy control method.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 춘계학술대회 학술발표 논문집
• /
• pp.39-42
• /
• 1998

This paper proposes an adaptive fuzzy control scheme for a class of continuous-time nonlinear dynamic systems for which an explicit linear parameterization of the uncertainty is either unknown or impossible. In order to improve robustness under approximation errors and disturbances the proposed scheme includes deadzone in adaptation laws which varies its size adaptively. The assumption of known bounds on the approximation errors and disturbances is not required since those are estimated using adaptation laws. The overall adaptive scheme is proven to guarantee uniform ultimate boundedness in the Lyapunov sense.

• 한국자동차공학회논문집
• /
• 제19권6호
• /
• pp.133-139
• /
• 2011

Maintaining adequate sealing in engine cylinder head is a crucial factor in engine design. Failure of engine operations occurs mainly owing to the leaking by decreased sealing pressure. Reliability-robustness concept is applied to the engine cylinder head system. Deterministic way to obtain engineering solution in CAE industry may not consider the effects of noises and disturbances experienced during operation. However, analytical reliability-robustness concept may make possible to reduce the sensitivity of system with noise factors. Influences of design factors including noise factors would be predicted in analytical way. Optimized design may be obtained by shrinking variability and shifting to design target. Three-dimensional finite element analyses have been performed to apply analytical reliability-robustness concept.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.775-778
• /
• 1996

In this research, the robustness of a seam tracking for the automatic welding system is studied. The laser displacement sensor is used as a seam finder. X-Y moving table drived by ac servo motor controls the position and velocity of the torch-and-sensor part. However, dc servo motor is used to control the position and velocity of the torch. The sensor locates ahead of torch to preview the weld line, and brings about the inaccuracy on the torch tracking. To enhance the robustness on this system against the influence of disturbances and model uncertainty, H$\_$.inf./ control is applied to the angular motion of torch. The simulation shows that the tracking accuracy improved significantly. Also, experimental results give a good performance of H$\_$.inf./ control strategy to the automatic seam tracking system for the welding.