• 한국산학기술학회논문지
• /
• 제10권1호
• /
• pp.58-66
• /
• 2009

본 논문은 전동기에서 기계적인 파라미터의 변화와 함께 외란의 변화에 대하여 외란상쇄 피드포워드 루프 제어를 적용한 유도전동기의 벡터제어를 고려하였다. 제안한 시스템에서 부하토크는 유도전동기의 토크를 최소차원 상태관측기를 근거로 하여 추정한다. 최소차원 상태관측기를 통해 추정된 부하토크에 의해 토크 전류를 얻어내고 토크 전류분을 피드포워드 보상해 줌으로서 외란에 의한 영향을 상쇄시켜 외란이 유입되거나 부하가 가변되는 등의 조건에서도 안정되게 동작하는 강인한 속도제어 시스템을 실현할 수 있다. 본 연구에서는 속도 센서가 없이 검출된 전압과 전류에 의해 속도를 추정하여 사용 하므로서 신뢰도를 높일 수 있도록 하였다. 제시한 제어기의 타당성을 입증하기 위하여 Matlab Simulink를 이용하여 시뮬레이션을 수행하여 타당성과 안정성을 검토하였고, 이를 실제 시스템을 구성하여 ADMC300를 이용하여 실험을 수행한 결과 기존의 시스템에 비하여 강인한 시스템으로 구동됨을 증명할 수 있었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.232-232
• /
• 2000

switched reluctance motors and drives are increasingly used in industrial applications due to their robust mechanical structure, low inertia and reduction in the rotor losses. As the motor speed increase turn on angle must be advanced to build up phase current. When C-dump converter is applied to switched reluctance motor, the capacitance of dump C has to have proper value. In this paper advance angle for a switched reluctance motor and capacitance of dump C are investigated. Then proper advance angle and the capacitance of dump-C are propose for the industrial low voltage SR motor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.373-375
• /
• 2004

The SRM is more robust and lower cost than other type motors. The inverter for SRM cannot have shoot through fault, since a phase winding of SRM is independent of other phase windings. The SRM has high starting torque and high power density. But it has torque ripples due to nonlinear magnetic characteristics. Therefore, SRM has highly non-linear torque producing characteristics. Because fuzzy logic is a flexible and general-purposed method for implementing non-linear dynamic functions, it is effective for the control of high current SRM. We design the fuzzy controller and demonstrate the fuzzy control system by MATLAB.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.230-230
• /
• 2000

This paper describes a model reference adaptive system(MRAS) for speed control of vector-controlled induction motor without a speed sensor. The proposed approach is based on observing the instantaneous torque. The real torque is calculated by sensing stator current and estimated torque is calculated by stator current that is calculated by using estimated rotor speed. The speed estimation error is linearly proportional to error between real torque and estimated torque. The proposed feedback loop has linear component. Furthermore proposed method is robust to parameters variation. The effectiveness is verified by equation and simulation

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 F
• /
• pp.1922-1924
• /
• 1998

In this paper, the robust vector control method of Induction Motor for the purpose of improving the system performance deterioration caused by parameter variations is proposed. The full order state observer estimates the stator current and the rotor flux by using the state prediction of state variables. And, the motor speed is estimated without speed sensor using the full order state observer. Also, the parameter variation is compensate by the Sliding Observer. By using this method, speed sensorless control and current contol with no affection of the parameter variation can be obtained simultaneously.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.385-387
• /
• 1995

The current mode controlled DC/DC converter using fuzzy logic controller is proposed. With the proposed control method, the robust and safty guaranteed operation are achieved. For comparison with conventional controller, the PI controller is selected. By the computer simulation results, the validities of the proposed control method will be shown.

• 전기학회논문지
• /
• 제58권5호
• /
• pp.923-928
• /
• 2009

The performance analysis and robust control of the interior permanent magnet synchronous motor(IPMSM) greatly depend on accurate value of its parameters. To achieve the high performance of torque control, it is necessary to consider exact inductance values because the inductances are nonlinear parameters of operating the IPMSM. Therefore many different methods have been performed for analysis of the methodology for the exact measurement of synchronous inductances. None of them is considered standard, and accuracy levels of all these methods are also not consistent. Among these experimental methods, the DC current decay test and the vector current control test are ideal for a laboratory environment. In this paper, these two test methods are compared by applying inductances to the IPMSM. The paper analyzes the measured inductances of the two methods and their differences with inductances obtained from the finite element method(FEM).

• 대한전기학회논문지
• /
• 제39권10호
• /
• pp.1066-1074
• /
• 1990

본 논문에서는 유동전동기에 최근에 개발된 비선형 제어이론을 적용시켜 회전자 속도와 회전자 자속사이에 간섭이 일어나지 않는 선형 시스템으로 변환시킴으로써 제안한 제어기가 유도전동기를 고성능뿐만 아니라 고효율로 제어할 수 있음을 수학적인 분석, 시뮬레이션, 그리고 실험을 통해 보였다. 제안한 제어기는 d-p동기 회전축과 x-y고정자축 사이의 변환, 전기각 속도의 적분, 그리고 전압방정식에서 역기전력과 결합항의 보상등이 필요치 않기 때문에 기존 벡터 제어기보다 계산이 간단하다는 장점을 갖고 있고 특히 전동기 매개변수의 변화에 강인한(robust) 특징을 갖고 있다. 본 논문이 제안한 설계방법은 최근에 개발된 이론인 특이섭동기법(singular perturbation technoque)과 비간섭 궤환제어(noninteracting feedback control)에 기초를 두고 있는데 실제로 이 이론들이 유도 전동기의 속도 및 효율제어에 효과적으로 적용됨을 본 논문을 통해 보이고 있다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 추계학술대회 논문집
• /
• pp.103-107
• /
• 2007

In doubly fed induction generators (DFIGs), control of rotor currents allows for adjustable speed operation, active, and reactive power control. This paper presents a DFIG control strategy that enhances the active and reactive power control with controllers that can compensate for the errors caused by current measurement path in the DFIG system. The errors can be divided into two categories: offset and scaling errors. These can induce the speed, active, and reactive power pulsations, which are one and two times the fundamental slip frequency in the DFIG. And these undesirable ripples can do the DFIG harm. In this paper, a new compensation algorithm is proposed. Therefore, the proposed algorithm has several advantages: to implement is easy; it require less computation time; it is robust with regard to the variation of the induction generator parameters. In this paper, a new algorithm is introduced by using the integral of phase currents to measure the current ripples of rotor-side converterin the DFIG system. The experiment results are shown the effectiveness of the proposed method.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제4B권2호
• /
• pp.59-64
• /
• 2004

Study of an accurate and robust braking control method is required as a technical improvement to the servo system. In particular, the braker exhibiting constant braking performance under speed variation conditions of the prime mover needs to be investigated. In this paper, the braking torque of the eddy current braker between the electromagnet stator and rotating disk is analyzed. The torque-speed characteristics and accurate disk construction are represented. From the computer simulation results, it was found that eddy current braking torque is linear or approximately constant over the desired speed range depending on the rotor material, disk construction, pole number and pole displacement of the stator. These relations are confirmed by experimental results.