• 제어로봇시스템학회논문지
• /
• 제10권10호
• /
• pp.878-886
• /
• 2004

Uncertainties are inevitable in robotic assembly in unstructured environment since it is difficult to construct fixtures to guide motions of robots. This paper proposes an augmented Petri net and an algorithm to adapt the assembly model on-line during actual assembly process. The augmented Petri net identifies events using force and position information simultaneously. Unmodeled contact states are identified and incorporated into the model on-line. The proposed method increases the level of intelligence of the robot system by enhancing the autonomy. The proposed method is evaluated by simulation and experiments with L-type peg-in-hole assembly using a two-arm robot system.

• 한국정밀공학회지
• /
• 제27권1호
• /
• pp.125-133
• /
• 2010

A versatile micro-robotic platform for micro/nano scale assembly has been demanded in a variety of application areas such as micro-biology and nanotechnology. In the near future, a flexible and compact platform could be effectively used in a scanning electron microscope chamber. We are developing a platform that consists of miniature mobile robots and a compact positioning stage with multi degree-of-freedom. This paper presents the design and the implementation of a low-cost and compact multi degree of freedom position sensor that is capable of measuring absolute translational and rotational displacement. The proposed sensor is implemented by using a CMOS type image sensor and a target with specific hole patterns. Experimental design based on statistics was applied to finding optimal design of the target. Efficient algorithms for image processing and absolute position decoding are discussed. Simple calibration to eliminate the influence of inaccuracy of the fabricated target on the measuring performance also presented. The developed sensor was characterized by using a laser interferometer. It can be concluded that the sensor system has submicron resolution and accuracy of ${\pm}4{\mu}m$ over full travel range. The proposed vision-based sensor is cost-effective and used as a compact feedback device for implementation of a micro robotic platform.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.231-234
• /
• 2004

Ratio that robot occupies is low level worldwide fairly in suspension wire, electricity electron and neutralization learning industry and domestic industry of this is staring in average love. Can speak that grafting of robotic machine and neutralization learning industry is high in terms of side of creation of the added value or progress of technology rightly hereupon. This research raises or designed multi-function handling robot that can make welding, assembly conveniently catching large size work water

• 대한산업공학회지
• /
• 제29권1호
• /
• pp.49-64
• /
• 2003

Although assembly sequence planning is an essential task in assembly process planning, it is known as one of the most difficult and time consuming jobs because its complexity is increased geometrically when the number of parts in an assembly is increased. The purpose of this study is to develop a more efficient algorithm for generating assembly sequences automatically. By considering subassemblies, a new heuristic method generates a preferred parallel assembly sequence that can be used in robotic assembly systems. A parallel assembly sequence concept provides a new representation scheme for an assembly in which the assembly sequence precedence information is not required. After an user inputs both the directional mating relation information and the mating condition information, an assembly product is divided into subgroups if the product has cut-vertices. Then, a virtual disassembly process is executed to generate alternate parallel assembly sequences with intermediate assembly stability. Through searching parts relations in the virtual disassembly process, stable subassemblies are extracted from translation-free parts along disassembling directions and this extraction continues until no more subassemblies are existed. Also, the arithmetic mean parallelism formula as a preference criterion is adapted to select the best parallel assembly sequence among others. Finally a preferred parallel assembly sequence is converted to an assembly BOM structure. The results from this study can be utilized for developing CAAPP(Computer-Aided Assembly Process Planning) systems as an efficient assembly sequence planning algorithm.

• 융합신호처리학회논문지
• /
• 제15권3호
• /
• pp.104-111
• /
• 2014

이 논문에서는 자동차의 제동장치에 사용되는 브레이크 모듈 조립 작업을 로봇을 사용하여 자동화한 사례를 소개한다. 브레이크 모듈은 하나의 토크 멤버에 두 개의 브레이크 패드와 두 개의 패드 라이너를 장착하여 조립을 완성한다. 이 조립 작업은 로봇의 방향을 자주 바꾸어 주어야하기 때문에 일반적인 산업용 로봇 핸드를 사용하면 조립 시간이 오래 걸린다. 이 논문에서는 두 가지 방법을 제안한다. 첫 번째 방법은 다섯 개의 그리퍼를 갖는 로봇 엔드 이펙터를 설계, 제작하여 기존의 산업용 6축 머니퓰레이터에 장착하여 조립 작업을 수행하는 방법이다. 이 방법에서는 두 개의 브레이크 패드와 두 개의 패드 라이너를 한꺼번에 파지하여 조립 작업을 수행하며 따라서 하나의 그리퍼 만을 가지고 있는 기존의 엔드 이펙터에 비해 조립 시간을 줄일 수 있었다. 두 번째 방법에서는 첫 번째 방법을 더욱 개선하여 엔드 이펙터가 하나의 부가적인 자유도를 가지도록 설계, 제작하여 기존의 산업용 6축 머니퓰레이터에 장착하였다. 이 방법에서는 전체 로봇 머니퓰레이터가 7 자유도를 갖는 여유자유도 머니퓰레이터가 되어 로봇의 동작을 최소화하면서 조립에 필요한 다양한 로봇 방향을 구현할 수 있었다.

• 로봇학회논문지
• /
• 제17권2호
• /
• pp.191-197
• /
• 2022

In this research, we developed the muscle-strength-assistant device, named as LEXO-W, and conducted suitability test for army when transporting high weights. LEXO-W relieves the burden when carrying heavy weights by distributing the load concentrated on the arms throughout the body. LEXO-W weighs 4 kg and is designed to handle objects weighing up to 55 kg. To verify the effectiveness of the device, object handling tests (high explosive shell, simple assembly bridges, and ammunition boxes) were conducted. Working time, metabolic rate, and electromyogram (EMG) signals were measured in each test. As a result, it was confirmed that the working time, metabolic rate and EMG signal before and after wearing LEXO-W were decreased. This research has great significance in that it verified the performance of the wearable device from the perspective of military operation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.5-9
• /
• 1987

In this study, three insertion techniques vibration method, tactile sensor-assisted method and vision assisted method are developed for the insertion of electric contacts into connectors. In order to prove their Performances, a series of experiments were conducted for various shapes of el-ectric contacts. From the experimental results, three insertion methods are compared and their merits are discussed in detail.

• 한국광학회지
• /
• 제13권4호
• /
• pp.283-288
• /
• 2002

유연부품은 조립 시에 변형이 발생하기 때문에 로봇을 이용한 자동조립에서 이의 성공적인 조립을 위해서는 부품변형 및 상대오차를 효과적으로 측정할 수 있는 방법이 필요하다. 이에 본 논문에서는 시각센서를 이용하여 상대오차 및 부품변형을 측정할 수 있는 3차원 측정시스템의 설계방법을 제안한다. 시스템의 광로해석을 통해 실제 작업공간과 카메라 영상면 사이의 사상관계를 해석하고, 이를 토대로 시스템의 설계방법을 제안한다. 또한 구현된 실제 시스템을 이용한 조립실험을 통해 제안된 시스템의 유효성을 검증한다.

• 대한전기학회논문지
• /
• 제39권4호
• /
• pp.414-427
• /
• 1990

This paper presents the development of the graphic simulator for an assembly workcell. The assembly workcell consists of two PUMA 560 manipulators, a conveyor belt system, a work table, and a vision sensor. In this study, the Petri Net theory is applied to model the assembly workcell and to construct the simulator. The event scheduling approach is used to simulate the cell. In order to show the graphic display of the simulation process, robot modelling, component modelling, and world modelling are included. The developed simulator is used to display the transition of the system state during the simulation. It is also used as a tool in selection the best resource states by studying the performance of the system as the resource states are changed.

• ETRI Journal
• /
• 제38권2호
• /
• pp.337-346
• /
• 2016

We propose a data-driven kinematic control method for a robotic spatial augmented reality (RSAR) system. We assume a scenario where a robotic device and a projector-camera unit (PCU) are assembled in an ad hoc manner with loose kinematic specifications, which hinders the application of a conventional kinematic control method based on the exact link and joint specifications. In the proposed method, the kinematic relation between a PCU and joints is represented as a set of B-spline surfaces based on sample data rather than analytic or differential equations. The sampling process, which automatically records the values of joint angles and the corresponding external parameters of a PCU, is performed as an off-line process when an RSAR system is installed. In an on-line process, an external parameter of a PCU at a certain joint configuration, which is directly readable from motors, can be computed by evaluating the pre-built B-spline surfaces. We provide details of the proposed method and validate the model through a comparison with an analytic RSAR model with synthetic noises to simulate assembly errors.