• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.5B no.2
• /
• pp.189-195
• /
• 2005

This paper presents a new velocity estimation strategy for a non-salient permanent magnet synchronous motor drive without high frequency signal injection or special PWM pattern. This approach is based on the d-axis current regulator output voltage of the drive system, which contains the rotor position error information. The rotor velocity can be estimated through a rotor position tracking PI controller that controls the position error at zero. For zero and low speed operation, the PI gain of the rotor position tracking controller has a variable structure according to the estimated rotor velocity. Then, at zero speed, the rotor position and velocity have sluggish dynamics because the varying gains are very low in this region. In order to boost the bandwidth of the PI controller during zero speed, the loop recovery technique is applied to the control system. The PI tuning formulas are also derived by analyzing this control system by frequency domain specifications such as phase margin and bandwidth assignment.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2725-2730
• /
• 2003

In this study we present a vibration controller for articulated robots that has flexible joints modeled as a 2-mass system. Most of articulated robots have time varying load inertias for each axis according to its motion. Moreover, the inertias vary drastically; for the base axis of articulated robots it may vary about 10 times of its minimum value. But, for industrial robots and many mechatronic devices, it is desirable to maintain control performance in spite of load inertia variation. So we propose a control gain adjustment rule considering the time-varying nature of load inertia. In this gain-adjusting algorithm, the pole locations are in proportion to the anti-resonance frequency of the 2-mass system. The simulation and experimental results show uniform properties in overshoot in spite of the variation of load.

• International Journal of Aeronautical and Space Sciences
• /
• v.10 no.2
• /
• pp.148-160
• /
• 2009

By the development of recent technology, a new variant of rotorcrafts having four rotors start drawing attention from aerial-robotics engineers more than before. Its potential spans from just being control device test bed to performing difficult task such as carrying surveillance device to unreachable places. In this regards, modeling a quad-rotor is significant in analyzing its dynamic behavior and in synthesizing control system for such a vehicle. This paper summarizes the modeling of a mini quad-rotor aerial vehicle. A first principle approach is considered for deriving the model based on Euler-Newton equations of motion. The result of the modeling is a simulation platform that is expected to acceptably predict the dynamic behavior of the quad-rotor in various flight conditions. Linear models associated with different flight condition can be extracted for the purpose of control synthesis.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.255-259
• /
• 1989

A suboptimal output feedback controller is designed and applied to a flexible rotor bearing system in order to control the unstable or lilghtly damped vibrations. The reduced order model is the truncated modal equation of the distributed parameter system obtained through the singular perturbation. The instability problem arising from the spillover effects caused by the uncontrolled high frequency modes is prevented through the constrained optimization by incorporating the spillover term into the performance index. The efficiency of the proposed method is demonstrated experimentally with a flexible rotor by using a magnetic bearing.

• Journal of the Korean Society for Precision Engineering
• /
• v.6 no.1
• /
• pp.52-74
• /
• 1989

In general, the state of system can be effected by external noise and observed only through a noisy channel. Therefore we use the estimation technigue for the information of state of the system effected by noise. There are many filters such as kalman-Buchy filter, kalman filter, Extended Kalman filter algorithm, cononlinear, extended Kalman filter algorithm to the estimation of parameters is very useful and has a long history. Also a considerable number of applications of this method has been reported. In this paper, the robot control system is treated in stochastic optimal control because of the robots doing a complicated and accurate task in inapproate environment. We have conclusion that error covariance is converged and the stability of filtering is obtained.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.675-678
• /
• 2002

A controller was designed generally using C or assembly languages on high-speed design controller. But, in this paper, DC servo controller is designed using the cord of the block-diagram of SIMTool. By the method, we can design, realized and analyzed a control system quickly in real-time. And we expect that the various plants of a robot vehicles are controled through the outside I/O board changing the structure of the block-diagram of SIMTool into AUTOTool. In addition, our developed system helps the most suitable automatic controller design and tester with hight-speed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.871-872
• /
• 2014

In this paper, I propose the method of cooperative work of swarm robot for escaping maze. The robots can communicate with each other using Zigbee, but the central control system send commands to robots because of low processing power of robots. Robots navigate the blinded maze and send information such as movement to the central control system for building map. The central control system analysis the received data and find path to escape from maze.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.3
• /
• pp.344-352
• /
• 1999

There has been requested to automate the welding process in shipyard due to its dependence on skilled operators and the inferior working environments. According to these demands, multiple robot welding system for sub-assembly welding line has been developed, realized and installed at Keoje shipyard. In order to realize automatic welding system, robots have to be equipped with a sensing system to recognize the position of the welding panels. In this research, a camera vision system(CVS) is developed to detect the position of base panels for sub-assembly line in shipbuilding. Two camera vision systems are used in two different stages (fitting and welding) to automate the recognition and positioning of welding lines. For automatic recognition of panel position, various image processing algorithms are proposed in this paper.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.1
• /
• pp.33-39
• /
• 2010

The interaction of emotion is an important factor in Human-Robot Interaction(HRI). This requires a contextual appraisal of emotion extracting the emotional information according to the events happened from past to present. In this paper an emotion appraisal system based on the cognitive context is presented. Firstly, a conventional emotion appraisal model is simplified to model a contextual emotion appraisal which defines the types of emotion appraisal, the target of the emotion induced from analyzing emotional verbs, and the transition of emotions in the context. We employ a language based cognitive system and its sentential memory and object descriptor to define the type and target of emotion and to evaluate the emotion varying with the process of time with the a priori emotional evaluation of targets. In a experimentation, we simulate the proposed emotion appraisal system with a scenario and show the feasibility of the system to HRI.

• The Journal of Information Systems
• /
• v.17 no.1
• /
• pp.155-171
• /
• 2008

This thesis proposed a method that connecting step motor to image send board which can acquire image to move and remote controlling via streaming image board of PDA(personal digital assistant) based on embedded Linux which is using wireless network There are three embedded Linux system to embody movable image send board. First, though the wireless network a signal of PDA is transmitted to the board which has embedded Linux and a system which is controlled by the expansion I/O port of the board. Second, it's a system streaming realtime image at a PDA which has embedded Linux. The last is a system which controls a process of image board using TCP/IP communication and image send board at PC. These are the system which can use industrial settings and homes. It can also make use of an embodiment method about travelling image robot.