• International Journal of Highway Engineering
• /
• v.14 no.5
• /
• pp.157-164
• /
• 2012

PURPOSES: Regional offices of the Ministry of Land, Transport and Maritime Affairs use a computerized system called KAMIS so as to manage road equipment systematically. Road agencies can record number of operating days by equipment, actual working hours, accumulated operating hours (or distance) by equipment, and operating cost. However, KAMIS does not provide critical information, although it is strongly related to efficient road management equipment operation. In other words, road agencies do not know whether they have sufficient equipment to handle their actual work. METHODS: Therefore, this study suggests a methodology to evaluate for operational efficiency of road management equipment using analytical hierarchy process(AHP). First of all, estimated weights related criteria can be produced by AHP, and then use operational history by pieces of equipment. RESULTS: Results show that importance of management work can differ from weather conditions through five areas. CONCLUSIONS: Commonly, this results can imply to help save money for the purchase and maintenance of road management equipment, and they would improve the functional performance of KAMIS.

• Journal of the Korean Society of Combustion
• /
• v.21 no.4
• /
• pp.1-5
• /
• 2016

The aim of this study is to compare the effectiveness of turbo chargers on engines for off-road use when combined with WGT and VGT technologies. The effectiveness of turbo chargers was measured and performance was compared using a functional model. Exhaust characteristics were compared using WGT and VGT technologies through a gas analyzer. Results showed VGT technology was more effective at high RPM compared to WGT technology. When it came to maximising turbo performance, VGT was more effective than WGT in every test. WGT and VGT produced similar exhaust NOx levels, whereas the VGT was more effective on the PM.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.2
• /
• pp.85-94
• /
• 2016

Lane Designation is defined as reasonable road management to ensure the road safety and enhance road efficiency. While the lane designation system was abolished in 1999, it was redefined because of the increasing number of large vehicles in the passing lane, violent on driving and traffic accidents in 2000. The needs of improvement on operating the lane designation has been increasing more in recent due to the low ratio of compliance with the system and difficulties to keep the right lane due to need of turning and demand of widening of designates lane for two-wheeled vehicles and truck. In this study, we presented the improvement plan through the question survey, simulation analysis, safety evaluation. It found a problem that the low-speed vehicle is to use the upper level roadway, difficulties of supervision, the imbalance in the lane use, imbalance traffic and does not match the international standards. This study suggested five different alternatives through the survey. micro simulation has used in order to examine each alternative by management effectiveness and feasibility. It analyzed the traffic speed, efficiency, traffic balance of alternatives. Also, safety evaluation conducted in terms of the range of field-of-view to ensure the easiness of field of view by various configurational difference between the vehicles. By the analysis results of such indicators, This study presents proposals for improvement in operating designated lane that low-speed-big-sized vehicles keep to the right lane, and high-speed-small sized vehicles keep to the left lane.

• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.60-67
• /
• 2000

The success of road haulage, in dominating the surface movement of freight, is now threatened by increased traffic congestion, falling average motorway speeds and rising in logistic costs. As a result, Government as well as companies, which use or operate logistics service, is now looking to rail to provide an alternative. First, we surveyed the bottlenecks and desired betterments to rail transport, which were indicated by rail and road transport users. Through the analysis of customers' needs survey. this paper is focused in the basic framework fur the rail freight transport, which could be helped to promote the efficiency associated with moving freight by rail.

• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.405-410
• /
• 1999

Topographic maps can be made and updated with satellite images, but it requires many human interactions that are inefficient and costly. Therefore, the automatizing of the road extraction procedures could increase efficiency in terms of time and cost. Although methods of extracting roads, railroads and rivers from satellite images have been developed in many studies, studies on the road extraction from satellite images of urbanized area are still not relevant, because many artificial components In the city makes the delineation of the roads difficult. So, to extract roads from high resolution satellite images of urbanized area, this study has proposed the combined use of wavelet transform and multi-resolution analysis. In consequence, this study verifies that it is possible to automatize the road extraction from satellite images of urbanized area. And to realize the automatization more completely, various algorithms need to be developed.

• The Journal of Bigdata
• /
• v.2 no.2
• /
• pp.129-140
• /
• 2017

Weather acts through low visibility, precipitation, high winds, and temperature extremes to affect driver capabilities, vehicle performance (i.e., traction, stability and maneuverability), pavement friction, roadway infrastructure, crash risk, traffic flow, and agency productivity. Recently a variety of road weather big data sources such as CCTV, road sensor/systems, car sensor have been developed to solve the weather-related problems, This study identifies and defines the types and characteristics of these sources to suggest how to utilize them for car safety and efficiency as well as road management through analyzing domestic and oversea cases of road weather big data applications.

• Environmental Engineering Research
• /
• v.25 no.1
• /
• pp.71-79
• /
• 2020

This paper uses super-efficiency DEA model and Malmquist index to evaluate the carbon emission efficiency (CEE) values of the nine western provinces along the "Silk Road Economic Belt" for the period from 2000 to 2015, and analyses the influencing factors of the CEE. The major findings of this study are the following: (1) the overall CEE of the nine western provinces is not high, and there are significant inter-provincial differences in the CEE. Meanwhile, the provinces with higher levels of economic development generally have higher CEE. (2) The annual total factor productivity (TFP) of the nine western provinces, which is mainly determined by technological change, is greater than 1. Moreover, the total average growth rate of the TFP is 15.5%. (3) The CEE of the nine western provinces is not spatially dependent. In addition, the urbanization, openness, use of energy-saving technologies and research and development (R&D) investment have a significant positive impact on the CEE values, while the industrial structure, foreign direct investment, fixed asset investment, government expenditure levels and energy structure have a significant negative impact on the CEE. Among them, R&D investment is the primary factor in promoting the development of CEE, and the government expenditure has the greatest negative impact on the CEE.

• Journal of Korea Spatial Information System Society
• /
• v.10 no.1
• /
• pp.29-40
• /
• 2008

With the spread of mobile devices and advances in communication techknowledges, the needs of application which uses the movement patterns of moving objects in history trajectory data of moving objects gets Increasing. Especially, to design public transportation route or road network of the new city, we can use the similar patterns in the trajectories of moving objects that move on the spatial network such as road and railway. In this paper, we propose a spatio-temporal similar trajectory search algorithm for moving objects on road network. For this, we define a spatio-temporal similarity measure based on the real road network distance and propose a grid-based index structure for similar trajectory search. Finally, we analyze the performance of the proposed similar trajectory search algorithm in order to show its efficiency.

• Journal of Korean Society of Forest Science
• /
• v.83 no.2
• /
• pp.211-220
• /
• 1994

The critical need of forest road for enchanting the additional values of various forest products, in addition, giving more recreational opportunity to citizen, has been recognized. In this study the present author aimed to ascertain the most effective construction working plan of forest road being tit to Korean geographic condition. To execute this research program, four locations in national forest of Kangweon-do district and other four locations in private forest in Chollabuk-do district both where forest roads have previously been constructed were selected to analyze the effectiveness basing upon the various factors separately or in combination. The results are summarized as follows ; 1. The investment efficiency in forest road construction showed to increase in the area where terrain factors and district social factors rate is high, and to decrease in the area where forest status factors and forest road structure factors rate is high. So in future the Forest Resource Development Model of forest road should take more importance particularly on those area having terrain factor ratio is low. The extractable value of constructed forest road based on forest status factors rate is expected to increase in case of high considerably. 2. To construct of forest road for increasing multiple use of forests, forest road should be construct with priority on area where obtained total score by evaluation factors is high. And these evaluation factors should take possible determine the position of forest road construction. 3. The following five types of forest road basing upon function performance are suggested with regard to the place where road is constructed. (1) Forest Utilization Model ; where forest status factors and forest road structure factors rate are over 60%. (2) Forest Resource Development Model ; where terrain factors, forest status factors, forest road structure factors and district social factors rate are less than 60%. (3) Community Development Model ; where terrain factors, forest road structure factors and district social factors rate are over 60% but forest status factors rate are less than 60%. (4) Recreation and Health Model ; where terrain factors, forest status factors, forest road structure factors and district social factors rate are over 60%. (5) Multiple Use Model ; where both forest status factors and district social factors rate are over 60%.

• International Journal of Highway Engineering
• /
• v.14 no.5
• /
• pp.123-132
• /
• 2012

PURPOSES: This study is to investigate the consideration which relates with a disaster from route alignment process and proposed the method it will be able to evaluate a disaster danger fixed quantity. METHODS: Use the landslide disaster probabilistic map of GIS based and in about landslide occurrence of the route alignment at the time of neighboring area after evaluating a risk fixed quantity, it compared LCC expense in about each alternative route. It developed the system it will be able to analyze a LCC and a disaster risk in about the alternative route. In order to verify a risk analytical algorithm and the system which are developed it selected national road 59 lines on the demonstrative route and it analyzed a disaster risk. RESULTS: Demonstrative route not only the disaster risk to be it will be able to compare a disaster risk fixed quantity like the economical efficiency degree in compliance with LCC expense productions it compared and there being the designer will be able to decide the alternative route, it confirmed. CONCLUSIONS: Roads can be designed by considering occurs repeatedly landslides and debris flow caused by disasters in advance and expect to be able to effect that can reduce the overall cost to recover losses caused by the disaster, and temporally loss is expected.