• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2007년도 춘계학술발표회 논문집
• /
• pp.333-336
• /
• 2007

This paper is the environmental impact assessment of at road design in the light of the sense for the real from the virtual reality. For in this papers, This study developed 3D-model and virtual reality contents by suggesting the environmental impact assessment based on GIS in the road design. And, through this process, it's possible to visualize the environmental impact assessment by constructing the 3D-model and simulation. The 3D-model can be a method to show the road effectively by maximizing the road's shape visually after the construction. The main construction which composes polyhedron model that is generated from digital map and aerial photo is built by mapping the real texture, so the Sense for the Real was more heightened. Through this study, it must be made to shorten a long time exhausting period of conference and construct more real road after due scene consideration by specific and various low-cost strategy in the environmental impact assessment afterwards.

• 한국소음진동공학회논문집
• /
• 제13권5호
• /
• pp.327-333
• /
• 2003

Several tests are performed to evaluate road booming noise. Baseline test delivers the information of road noise characteristics. Coupling effect between structure and acoustics is obtained from the mode shapes and the natural frequencies by the modal test. Equivalent stiffness at joint areas between chassis and car-body system can be determined by the input point inertance test. Noise sensitivity of body mounting point of a chassis part can be obtained from the noise transfer function test with input point inertance test. Operational deflection shape makes us analyze the actual vibration modes of the chassis system under actual leading and find noise sources very easily. Finally, the transfer path analysis is used to Identify noise Paths through the chassis system. The objectives and the procedures of the tests are described in this Paper Also, the guideline for efficient road noise evaluation test can be found.

• 한국정밀공학회지
• /
• 제24권1호
• /
• pp.37-46
• /
• 2007

The vibration environment essentially companied by vehicle operation on the ground is determined by the shape of road surface, which is called profile. This paper focuses on development of a profile and severity measurement system for unpaved test courses. In general, the profile and severity of unpaved road is an important issue in the reliability of endurance test. In order to measure unpaved road profile and severity, it is necessary to develop a profilometer system. The developed profilometer system is composed of data processing computer, power unit, air compressor and sensors(encoder, vertical gyro and laser displacement) This paper presents the measuring system configuration, measurement principle of road profile and analysis method of road characteristics used at CPG(Changwon Proving Ground) for this purpose.

• 한국자동차공학회논문집
• /
• 제10권5호
• /
• pp.147-159
• /
• 2002

This paper proposes a method to recognize the noisiness of road images connected with the extraction of lane-related information in order to prevent the usage of erroneous information. The proposed method uses a fuzzy neural network(FNN) with the back-Propagation loaming algorithm. The U decides road images good or bad with respect to visibility of lane marks on road images. Most input parameters to the FNN are extracted from an edge distribution function(EDF), a function of edge histogram constructed by edge phase and norm. The shape of the EDF is deeply correlated to the visibility of lane marks of road image. Experimental results obtained by simulations with real images taken by various lighting and weather conditions show that the proposed method was quite successful, providing decision-making of noisiness with about 99%.

• 한국농촌건축학회논문집
• /
• 제15권1호
• /
• pp.89-96
• /
• 2013

This study aims to clarify the transformation of urban spatial structure around old castle in cheong-ju city. The urban spatial structure is composed with road system, block division, and lot system with original cadastral map in 1913 and 2011 GIS. Transformation of road system is classified into control of road line, construction and extension of road. Construction of arterial road was divided into Nam-juro and Mang-sunro with 2 blocks and lot system was destoyed. Transformation of block has not been developed except 4 blocks. The 4 blocks were divided into east-west or north-south direction and became 8 blocks. Transformation of lot system is classified into maintained, subdivided, and destroyed lots in shape and size of lots. Maintained lots were found in large lot in size for public office and park. Subdivided lots were mainly represented with the existing main road, an active alleys, and so on. Destroyed lots by road construction and extension were showed in Nam-juro. Although all these transformations are used to enhance urban spatial structure. The old systems have remained around old castle in cheong-ju city.

• 한국지리정보학회지
• /
• 제11권2호
• /
• pp.121-131
• /
• 2008

2차원적인 도로설계는 설계기준과 운전자의 반응 사이에는 상이한 점이 많아 위험성을 내포하고 있다. 따라서 2차원 도로설계는 시공전에 예측을 하기가 어려운 실정이다. 그러나, 3차원 도로설계는 요구되는 구성요소의 완성 이후 발생하는 문제를 예측할 수 있다. 본 연구에서는, 실제도로에서 도로설계평가를 위하여 설계를 하였다. 그리고 도로설계는 Inroad를 라는 도로설계프로그램을 사용하였다. 또한, 수치지형도와 포고자료를 이용하여 DTM을 생성하였다. 3차원 도로설계는 도로의 DTM 과 지형자료를 합성하여 설계를 하였다. 3차원적으로 도로설계된 것을 이용하여 설계평가를 수행하였다. 도로선형의 안정성 평가를 위하여 운전자 시뮬레이션과 시거분석을 실시하였다. 그리고, 음영시뮬레이션을 통해 도로노면결빙구간의 불량구간을 추출하였다. 시뮬레이션 결과, 본 연구에서는 도로완공후의 모습을 확인할 수 있었다. 그리고 시거를 시각적으로 산정을 할 수 있었다. 또한 음영 시물레이션을 의해 도로노면결빙구간을 추출하였다.

• 한국터널지하공간학회 논문집
• /
• 제11권4호
• /
• pp.411-417
• /
• 2009

도로터널내 열유동장의 형성은 여러 가지 요인의 영향을 받는다. 즉 차량의 이동에 의한 피스톤 효과, 환기설비의 환기력, 자연풍 영향, 화재시 부력 등에 따라 도로터널내 기류가 형성된다. 차량의 이동에 의한 피스톤 효과는 도로터널내 기류생성의 일차적인 요인이며, 화재시 연기의 초기 거동에 영향을 줄 수 있다. 본 연구에서는 도로터널내 차량의 이동에 의해 생성되는 비정상 기류를 분석하기 위해서 단순한 형태의 터널과 차량에 대한 축소모형실험장치를 제작하고 실험을 수행하였다. 기본형, 전두부 사변형, 후두부 계단형의 3가지 형태로 차량의 형상을 변화시켜가며 차량운행에 따라 형성되는 터널내 압력과 기류속도를 측정하였다. 실험결과 터털내 생성되는 압력과 속도의 크기는 "기본형>후두부 계단형>전두부 사변형"의 순서로 증가하였다. 실험결과는 향후 3차원 수치해석 결과와의 비교, 검토를 통해서 수치해석 기술의 보완 및 신뢰성 확보를 위한 기초자료로 활용될 수 있다.

• 한국멀티미디어학회논문지
• /
• 제19권2호
• /
• pp.252-263
• /
• 2016

Road sign is an important street furniture that gives some information such as road conditions, driving direction and condition for a driver. Thus, road sign is a major target of image recognition for self-driving car, ADAS(autonomous vehicle and intelligent driver assistance systems), and ITS(intelligent transport systems). In this paper, an enhanced road sign recognition system is proposed for MMS(Mobile Mapping System) using the single camera and GPS. For the proposed system, first, a road sign recognition scheme is proposed. this scheme is composed of detection and classification step. In the detection step, object candidate regions are extracted in image frames using hybrid road sign detection scheme that is based on color and shape features of road signs. And, in the classification step, the area of candidate regions and road sign template are compared. Second, a Geo-marking scheme for geo-content that is consist of road sign image and coordinate value is proposed. If the serious situation such as car accident is happened, this scheme can protect geographical information of road sign against illegal users. By experiments with test video set, in the three parts that are road sign recognition, coordinate value estimation and geo-marking, it is confirmed that proposed schemes can be used for MMS in commercial area.

• 한국산학기술학회논문지
• /
• 제10권5호
• /
• pp.917-922
• /
• 2009

본 연구에서는 ISO, MIRA, 그리고 Wong에 의해 제안된 노면 PSD 함수를 기초의 3차원 노면의 생성 방법에 대해 연구하였다. 주어진 노면 거칠기 특성이 PSD 함수를 사용하여 2차원 노면을 생성한 뒤 상관도를 고려하여 횡방향으로 연속적으로 배치함으로써 실제 노면 특성에 유사한 3차원 노면을 생성하였다. 생성된 노면의 상관도를 평가한 결과 실제 노면의 상관도 특성과도 잘 일치함을 확인하였다. 또한, 3차원 노면을 자동으로 생성하기 위하여 반복적으로 횡방향 노면을 생성시켜 주는 프로그램을 개발하였다.

• 건축역사연구
• /
• 제28권4호
• /
• pp.17-26
• /
• 2019

After opening Suwon railway station in 1905, a new road was constructed between Suwon station and Paldalmun(the South gate). It was the starting point to change urban structures of Suwon and shape the new city scape. In 1914, administrative districts of Suwon were reorganized. Suwon-myeon (township, a subdivision of Suwon-gun) was promoted to Suwon-eup(town) in 1931. Suwon-eup expanded its territory and changed the address system from 'li(里)' system to Japanese address system, 'Jeong(町)' in 1936. From 1920s, road system was changed and transformed Suwon's urban structures. A straight road was built from Jongro intersection to Janganmun(the north gate) in 1928. Another straight road was constructed between Suwon station to Padamun in the early 1930s. Public office buildings used the Hwa Seong HaengGung(華城行宮) and some of building moved to new location with new buildings. Main buildings of most schools in Suwon were reconstructed since 1930s. Commercial buildings and stores were sprung up and had their own characteristics by region. Around Suwon station, there are more hotels and restaurants than other areas. Rearranging administrative areas, developing road system and new buildings transformed Suwon's spatial structures. Constructing new roads formed a straight road passing through Suwon. After reorganizing administrative areas, this road turned to be the central axis of Suwon. Buildings in new style on the axis made the modern cityscape in Suwon.